Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Compaction Temperature"”.
-
The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites
… properties This thesis explores the effect of compaction pressure and temperature on improving the mechanical properties of 3D printed composites. Engineering moduli in the printing and transverse to printing direction, as well as ultimate strength were measured using the tensile testing with …
-
Room temperature methane and hydrogen adsorption studies on high-surface-area nanoporous carbon monoliths
… (II) binder/carbon mass ratio, (III) monolith compaction temperature and (IV) monolith compaction pressure. We found that precursor with different KOH mass ratio and compaction temperature both have large influences on monolith storage capacities. We have been able to optimize the monolith�s …
-
Cracking Performance Evaluation of Asphalt Mixtures in Virginia
… undergoes aging influenced by factors like temperature and exposure to oxygen. Oxidative aging, for instance, alters the properties of the asphalt binder, leading to increased stiffness and a consequent decrease in resistance to cracking. This study aims to establish a long-term aging …
-
The extrusion limits, parameters and microstructures of aluminium 2014 solid and powder.
… Al-2014 alloy extrusions, heat transfer during compaction, temperature changes during extrusion, microstructures of extrusion products, hot torsion and plane strain compression tested specimens have been extensively investigated. Estimation of maximum and minimum pressure allows the prediction …
-
The effect of C:N ratio on bench-scale composting of pulp and paper biosolids
… Parameters that were monitored included compaction, temperature, and volatile solids reduction. It was found that an optimum C:N ratio (20:1) resulted in an increase in volatile solids reduction of 6% greater than the control (90:1), and showed similar temperature profiles The results …
-
Laboratory Evaluation of Warm Mix Additives at Lower than Traditional Compaction Temperatures
… tests such as performance grade (PG), critical temperature differential (ΔTc), asphalt binder cracking device (ABCD), linear amplitude sweep test (LAS), and Fourier transform infrared spectroscopy (FTIR) were performed. In addition to the binder testing plan, this study also evaluated the impact …
-
Properties of Warm Mix Asphalt from Two Field Projects: Reno, Nevada and Manitoba, Canada.
… in a sealed container at the expected lay-down/compaction temperature. Overall, the resistance of WMA mix to moisture damage was found to be WMA technology-specific and also dependant on whether or not antistripping additives were incorporated in the mix, all other factors being constant. The …
-
Methods to Generate Size- and Composition Controlled Aerosol Nanoparticles
… was investigated. When comparing the relative compaction temperature for different nanoparticles produced in different laboratories deviations in the sintering behavior were found. These could be associated to the different particle compositions. Individual nanoparticles were generated from …
-
INVESTIGATING THE INTERACTION BETWEEN THE RECYCLED COMPONENTS AND THE ASPHALT BINDERS, PLANT, LAB, AND FIELD MIXES
… field mixes because plant mixes were reheated to compaction temperature in the lab. The fabrication mechanism used in lab mixes revealed more interactions and exchanged components between recycled materials and VABs than in field mixes. The use of a soft VAB in asphalt mixes counteracted the …
-
The Impact of Soil Type and Cohort Size on Pupation Depths for the Forensically Important Blow Fly, Phormia regina (Diptera: Calliphoridae)
… the different properties present (moisture, soil compaction, temperature, and pH) in the soil during these testing phases. Beyond the testing of two soil substrates, cohort size (groups of 30, 60, and 120 larvae) and larval weight were investigated as factors to see if changes would have an impact …
-
Balancing Practicality and Field Relevance: A Laboratory Aging Protocol for Asphalt Surface Mixtures in Virginia
… to ten mixtures aged at both reduced 95°C and compaction temperatures to determine equivalent aging durations and identify a practical LTOA method. Phase 3 utilized the Glover-Rowe parameter (GRP) to define CT Index thresholds for different levels of cracking severity. Phase 4 compared …
-
Sealing performance assessments of bentonite and bentonite/crushed rock plugs.
… pressure flow tests, polyaxial flow tests, high temperature flow tests, and piping tests. The results indicate that an appropriate composition would have at least 25% bentonite by weight mixed with well-graded crushed rock. Hydraulic properties of the mixture plugs may be highly anisotropic if …
-
Digital Mix Design for Performance Optimization of Asphalt Mixture
… contact model. The void content before compactions was used to judge the relative merits of a gradation. Once a gradation is selected, the Voids in Mineral Aggregate (VMA) can be determined. For a certain air void content, the mastics volume or the binder volume or the asphalt content …
-
Performance Evaluation Of Sustainable Pavement Materials
… the potential use of wastewater sludge (WWS) as compaction aid additive and Warm Mix Additive (WMA) were investigated. Rate dependent normalized low-temperature cracking performance analysis was also conducted to better differentiate between the mixes and for better correlation with mix design …
-
EVALUATION OF WARM ASPHALT ADDITIVES ON PERFORMANCE PROPERTIES OF CRM BINDERS AND MIXTURES
… property to allow the reduction in mixing and compaction temperatures of Hot Mix Asphalt (HMA) mixtures without compromising the quality of the mix. On the other hand, one of the reasons for utilizing the Crumb Rubber Modified (CRM) asphalt mixtures is that it increases the durability of the …
-
Effect of voids on the interlaminar failure of carbon/epoxy composites
… a controlled void content. A novel pressure and temperature-controlled method was used, and by varying manufacturing parameters, such as compaction temperature and pressure, it has been shown that samples with a range of void contents can be produced. Furthermore, two different material systems …
-
Contribution to the evaluation of the compaction characteristics of asphalt mixtures
Asphalt mixture compaction has been well recognized as one of the most critical factors affecting the pavement behavior, providing all desirable mixture design characteristics are met. This poses a challenge the laboratory compaction to simulate the field compaction, so that a reliable assessment …
-
Rozšířené možnosti využití přilnavostních přísad v asfaltových směsích
Bakalářská práce se zabývá rozšířenými možnostmi využití přilnavostních přísad v asfaltových směsích a jejich vlivem na vlastnosti asfaltové směsi typu ACO 11+. Teoretická část práce je zaměřena na technologii výroby, dopravy a pokládky asfaltových směsí a na princip působení přilnavostních a …