Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Component Interaction"”.

  1. Software component interaction testing: Coverage measurement and generation of configurations.

    Systems constructed from components, including distributed systems, consist of a number of elements that interact with each other. When a system is integrated, there may be undesired interactions among those components that cause system failures. There are two complementary problems in testing a …

    ottawa-retro Repository record for Software component interaction testing: Coverage measurement and generation of configurations. (opens in a new tab)

  2. IMPROVED PREDICTION OF FLAPPING WING AERIAL VEHICLE PERFORMANCE THROUGH COMPONENT INTERACTION MODELING

    … challenge, performance is estimated by using component-level modeling as a foundation. Experimental characterization of the drive motors, battery, and wings is performed to identify important functional characteristics and enable selection of appropriate modeling techniques. Component-level …

    maryland Repository record for IMPROVED PREDICTION OF FLAPPING WING AERIAL VEHICLE PERFORMANCE THROUGH COMPONENT INTERACTION MODELING (opens in a new tab)

  3. Architecture specification and implementation for component -based systems

    Component-Based Software Engineering (CBSE) has become an area of intense research and commercial focus with the complexity of software systems increasing. To help design component-based systems, Software Architecture (SA) has become a prospective research method and direction. SA is system-centric …

    nebraska Repository record for Architecture specification and implementation for component -based systems (opens in a new tab)

  4. Performance simulation and verification of a continuously variable planetary (CVP) transmission

    … modeling and simulation methods which represent component interaction at the traction interface. The focus of this thesis is the implementation of a dynamic system simulation of a continuously variable planetary (CVP) transmission. Modeling of the traction interface is developed using …

    texas Repository record for Performance simulation and verification of a continuously variable planetary (CVP) transmission (opens in a new tab) Restricted access

  5. Quantifying the effect of pedestrian control devices on pedestrian safety

    … pedestrian safety. From the result of the first component of the investigation, the effect of a flexpost island is not significantly different from the effect of a marked crosswalk on driver yielding propensity. Significant differences were observed between yielding at concrete refuge islands and …

    texas Repository record for Quantifying the effect of pedestrian control devices on pedestrian safety (opens in a new tab)

  6. Analytic shape sensitivities and approximations of local and global airframe buckling constraints

    … of buckling failure with the same FE model. Sub-component interaction during buckling can, thus, be taken into account during shape optimization of wing and fuselage structures. Numerical tests involving isotropic and laminated plates, thin walled channel sections and a complete wing box of a …

    washington Repository record for Analytic shape sensitivities and approximations of local and global airframe buckling constraints (opens in a new tab)

  7. Zonal Safety and Particular Risk Analysis for Early Aircraft Design using Parametric Geometric Modelling

    … modelling, parametric zone definition, and zone-component interaction analysis methods are developed that are supported by a manually prepared database of safety-driven best practices. The CPRA involves parametric modelling of particular risk threat zones for trajectory-based PRAs and automated …

    concordia Download PDF for Zonal Safety and Particular Risk Analysis for Early Aircraft Design using Parametric Geometric Modelling (opens in a new tab)

  8. Azoto ir vandenilio atmosferų įtaka GaN sluoksnių auginimui ant Sc2O3(111)/Si(111) ruošinio MOVPE būdu /

    … strain in the GaN layer is a result of a dual-component interaction: lattice mismatch between Si and GaN as well as their different thermal expansion rates. We also showed that controlling the growth atmosphere between N2 and H2 during various stages of the GaN growth on Sc2O3(111)/Si(111) …

    vilnius Repository record for Azoto ir vandenilio atmosferų įtaka GaN sluoksnių auginimui ant Sc2O3(111)/Si(111) ruošinio MOVPE būdu / (opens in a new tab)

  9. A structural and physico-chemical investigation of mineral/organic composites as novel components of engineered fill

    … design has ensured proper understanding of component interaction and subsequent optimisation of the composite parameters. Solidification and stabilisation of the materials took place by compacting and cementing the wastes together. The coarse minerals formed a skeletal support whereas fine …

    greece Repository record for A structural and physico-chemical investigation of mineral/organic composites as novel components of engineered fill (opens in a new tab)

  10. Open Digital Libraries

    … the OAI can easily be extended to support inter-component interaction within a componentized DL. In particular, DLs can be built by connecting small components that communicate through a family of lightweight protocols, using XML as the data interchange mechanism. In order to test the feasibility …

    vt Repository record for Open Digital Libraries (opens in a new tab)

  11. Physics-based aeroacoustic modelling of bluff-bodies

    … resulting from the turbulent flow around various components. The research was initiated in response to the need for an improved understanding of landing gear noise prediction tools. A computational approach was adopted so that the noise generating physics of the problem could be captured. …

    soton Download PDF for Physics-based aeroacoustic modelling of bluff-bodies (opens in a new tab)

  12. Stochastic modeling and prognostic analysis of complex systems using condition-based real-time sensor signals

    … for modeling the degradation processes of components in complex engineering systems using sensor based signals. Chapters 1 and 2 discuses the challenges and the existing literature in monitoring and predicting the performance of complex engineering systems. Chapter 3 presents the …

    gatech Repository record for Stochastic modeling and prognostic analysis of complex systems using condition-based real-time sensor signals (opens in a new tab)

  13. Prediction of bulk and interfacial thermodynamic properties of polar mixtures by statistical associating fluid theory

    … Associating Fluid Theory (SAFT) for multi-component mixtures has been implemented in conjunction with a phase-stability and flash algorithm. The model has been extensively tested for various non-associating and associating mixtures and comparisons are made with the Peng-Robinson equation of …

    texas Repository record for Prediction of bulk and interfacial thermodynamic properties of polar mixtures by statistical associating fluid theory (opens in a new tab)

  14. Performance in multiple schedules

    … were made. In Experiment 1 the effects of component durations and component reinforcer rates on multiple-schedule performance were investigated. Component duration did not affect sensitivity to the ratios of reinforcer rates. In Experiment 2 the effects of food deprivation and component …

    auckland-ms Repository record for Performance in multiple schedules (opens in a new tab)

  15. Predicting The Geometrical Disassembly Feasibility Of Mechanical Assemblies In Design Phase

    … by checking the disassemble feasibility of components of an assembly by considering the types of relationships among components and summarizing all these disassembly sequences in one precedence matrix. Then, using the developed precedence matrix in predicting the change in geometrical …

    wayne-thes Repository record for Predicting The Geometrical Disassembly Feasibility Of Mechanical Assemblies In Design Phase (opens in a new tab)

  16. Modelling and simulation of process configurations combining distillation and reaction

    … on a direct account of the diffusion with multi-component interaction effects, reaction kinetics, and heat transport. The model includes mass transfer in the film region, a catalyst efficiency determination based on the mass transfer inside the catalyst, and hydrodynamic models for reactive …

    aalto Repository record for Modelling and simulation of process configurations combining distillation and reaction (opens in a new tab)

  17. Taxonomy and pathogenicity of rusts from Allium species in the U.K

    … than seedlings in at least two quantitative components. However leaf tissue appeared to become more susceptible to infection with age, except in the leaf tips, which did not change in susceptibility over time. Inoculation of 16 leek cultivars with leek rust isolates from different …

    birmingham Download PDF for Taxonomy and pathogenicity of rusts from Allium species in the U.K (opens in a new tab)

  18. Limit and deformation analysis for frame structures with mathematical programming

    … advantages of theproposed formulations for multi-component interaction and multi-linear or nonlinearstructural behavior. The main conclusions of this dissertation may constitute the central pointsof future research concerning limit analysis not only in the field of structural engineering, butalso …

    greece Repository record for Limit and deformation analysis for frame structures with mathematical programming (opens in a new tab)

Page 1 of 2