Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"Composite Cathode"”.
-
Sulfur based Composite Cathode Materials for Rechargeable Lithium Batteries
… batteries. Recently, cheaper and less toxic cathode materials, such as LiFePO₄ and a wide range of derivatives of LiMn₂O₄, have been successfully developed and commercialized. Furthermore, cathode material candidates, such as LiCoPO₄, which present a high redox potential at approximately 4.8 …
-
Development of sulfur-polyacrylonitrile/graphene composite cathode for lithium batteries
… into the electrolyte and their shuttle between cathode and anode lead to fast capacity degradation and low Coulombic efficiency. As a result of this shuttle process, insoluble and insulating Li2S/Li2S2 precipitate on the surface of electrodes causing loss of active material and rendering the …
-
TELLURIUM/POROUS CARBON COMPOSITE CATHODE FOR LI-ION BATTERIES AND CARBON NANOFIBERS ANODE FOR NA/K-ION BATTERIES
… enhance the electronic conductivity in anodes or cathodes of Li-ion batteries (LIBs), as well as to support other active materials in high-capacity nanocomposite electrodes. A novel lithium-tellurium battery was established here using tellurium/porous carbon composite (Te/C), which was synthesized …
-
Air plasma spraying of SOFC composite cathodes
… spraying (APS) has been used to produce porous composite cathodes containing (La0.8Sr0.2)0.98Mn(LSM) and yttria stabilized zirconia (YSZ) for use in solid oxide fuel cells (SOFCs). Preliminary investigations focused on determining the range of plasma conditions under which each of the individual …
-
Effect of Carbonate Addition on Cobaltite Cathode Performance
… the overpotential performance enhancement of cathodes in low temperature solid oxide fuel cells (LT-SOFCs) due to the addition of carbonates to traditional Ce0.9Gd0.1O2 solid oxide fuel cell (SOFC) electrolytes. It was postulated in this study that this enhancement was due to the protonic …
-
Synthesis and Characterization of Polymer Composite Materials For Lithium Battery Cathodes and Capacitors
… the synthesis and characterization of polymer composite materials used in lithium primary batteries and capacitors. The objective of the first part of the dissertation is to develop cathode materials based on silver vanadium oxide (SVO) coated with polypyrrole (PPy) having lower …
-
Tailoring Perovskite- and Fluorite-Type Oxides for Solid Oxide Fuel Cells (SOFCs)
… serve as alternate anodes, electrolytes, and cathodes for intermediate temperature SOFCs. Here, the chemical reactivity between a fluorite-based Ce0.7RE0.2Mo0.1O2 (RE = Y, Sm) anode and 8 mol% yttria-stabilized zirconia electrolyte was evaluated at 1000 ºC. The electrical conductivity of the …
-
Mechanical Properties and Electrochemical Durability of Solid Oxide Fuel Cells
… fracture strength testing. Half cell SOFCs with composite cathode (Pr0.7Sr0.3)MnO3±Î´ /8YSZ on the 8YSZ electrolyte were aged 1000 hours at 1000 oC in air with/without polarization and investigated using Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscopy (SEM), …
-
Effect of Fabrication Pressure and NMC Cathode Composition on LPSCL Electrolyte for Solid-State Battery Performance Improvement
… composed of an NMC (nickel-manganese-cobalt) composite cathode, sulfide solid electrolyte (lithium-phosphorus-sulfur-chloride), and a lithium metal anode. The cell performance was analyzed by changing the ratio of materials used in the composite cathode, which is made up of NMC, carbon black …
-
NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES
… improved, which urges the exploitation of novel composite cathode or anode materials high specific capacity, high rate capability, especially stability and capacity retention when battery undergoes an extreme charging process as indicated recently. The first part of this thesis aims to …
-
HIGH ENERGY ALL-SOLID-STATE LITHIUM SECONDARY BATTERIES COMBINING SULFUR-BASED CATHODES WITH ARGYRODITE ELECTROLYTE
… combining argyrodites with various sulfur-based cathodes. ASSLBs using CuS or Cu-Li2S as cathode experience fast capacity fading regardless of the preparation method for the composite cathode, as Cu+ partly substitutes for Li+ in argyrodites yielding CuyLi6-yPS5Br at the intermediate discharge …
-
Investigations of cobalt-based oxides as cathode materials for intermediate-temperature solid oxide fuel cells
… redox couple have been investigated as potential cathode materials for the intermediate-temperature solid oxide fuel cells (IT-SOFCs). X-ray absorption spectroscopy measurements confirmed that both the oxygen-deficient perovskite Sr[subscript 0.7]Y[subscript 0.3]CoO[subscript 2.65-delta] (SYCO) …
-
Preparation of solid oxide fuel cell cathodes and analysis by impedance spectroscopy
… operate in intermediate temperatures; which have cathodes with improved microstructures to enhance the oxygen reduction reaction. However, designing novel cathode structures needs a fundamental understanding of cell processes. Impedance spectroscopy is a very powerful tool for studying SOFCs which …
-
Synthesis of Sulfide-based Solid Electrolytes for Application to All-Solid-State Lithium Sulfur Batteries
… and the composition and architecture of the composite cathode. First, two batteries are compared- using Li7P3S11 and Li10GeP2S12 (LGPS) solid electrolyte respectively. The Li10GeP2S12-based cell proved superior capacity, but poor cyclability and rate capability, and investigation showed that …
-
Low platinum electrodes for proton exchange fuel cells manufactures by reactive spray deposition technology
… of a layer of unsupported platinum followed by a composite layer of Nafion®, carbon and platinum. Comparison to more traditional composite cathode architectures is made at loadings of 0.12 and 0.05 mg platinum/cm². The composition and phase of the platinum catalyst is confirmed by XPS and XRD …
-
Self-discharge of Rechargeable Hybrid Aqueous Battery
… hybrid aqueous batteries, using LiMn2O4 as a cathode and Zinc as an anode. It is shown through a variety of electrochemical and ex-situ analytical techniques that many parts of the composite cathode play important roles on the self-discharge of the battery. It was determined that the current …
-
Continuum modeling of electro-chemo-mechanical phenomena in all-solid-state batteries
… features a Lithium-metal anode, a solid-state composite cathode, and a stiff ceramic electrolyte. While an attractive alternative, commercialization of SSBs faces a series of chemo-mechanical issues across its constituents, namely growth induced fracture of solid-state electrolyte (SSE) due to …
-
A NEW APPROACH FOR ENERGY STORAGE AND ELECTROCATALYSIS: LITHIUM-GAS BATTERIES WITH MOLTEN SALT ELECTROLYTE
… electrolyte and noncarbonaceous nickel-nitrate composite cathode leads to stable cycling, reasonable capacity, good reversibility, and improved electrode kinetics. The feasibility of molten salt electrolyte system is confirmed when extended to Li-CO2 batteries, based on the achieved good cycling …
Page 1 of 3