Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Composite Cathodes"”.

  1. Air plasma spraying of SOFC composite cathodes

    … spraying (APS) has been used to produce porous composite cathodes containing (La0.8Sr0.2)0.98Mn(LSM) and yttria stabilized zirconia (YSZ) for use in solid oxide fuel cells (SOFCs). Preliminary investigations focused on determining the range of plasma conditions under which each of the individual …

    ubc Repository record for Air plasma spraying of SOFC composite cathodes (opens in a new tab) Download PDF for Air plasma spraying of SOFC composite cathodes (opens in a new tab)

  2. Investigation and Improvement of SofC Composite Cathodes

    … performance, and long term stability of SOFC composite cathodes prepared by infiltration methods. The majority of the work that follows aims to improve the understanding of the processes contributing to cathode deactivation and to propose strategies to lessen the extent of this deactivation. …

    penn Repository record for Investigation and Improvement of SofC Composite Cathodes (opens in a new tab)

  3. DURABILITY AND OPTIMIZATION OF SOFC COMPOSITE CATHODES

    … low temperature solid oxide fuel cell (LT-SOFC) cathodes. Though the initial performance of this composite is encouraging, the long-term stability of LSM-ESB has yet to be investigated. Here electrochemical impedance spectroscopy (EIS) was used to in situ monitor the durability of LSM-ESB at …

    maryland Repository record for DURABILITY AND OPTIMIZATION OF SOFC COMPOSITE CATHODES (opens in a new tab)

  4. Carbon Nanotube Enhanced Lithium Ion Composite Cathodes

    … the power capability and cycle life of battery cathodes by reducing the electrode resistance to the reaction site and increasing the diffusion coefficient for ions and electrons. Electrode resistance is typically reduced by a combination of surface coatings and carbon additives in the …

    oklahoma-thes Repository record for Carbon Nanotube Enhanced Lithium Ion Composite Cathodes (opens in a new tab)

  5. Development of Plasma Sprayed Composite Cathodes for Solid Oxide Fuel Cells

    … developed to manufacture metal-supported SOFC cathodes by axial-injection plasma spraying. Cathodes consisted of LSCF (La0.6Sr0.4Co0.2Fe0.8O3-δ) or SSC (Sm0.5Sr0.5CoO3) as the primary material. Initially, the plasma spray process parameters were varied, and x-ray diffraction analyses were …

    toronto-retro Repository record for Development of Plasma Sprayed Composite Cathodes for Solid Oxide Fuel Cells (opens in a new tab)

  6. Operando tomographic characterisations of solid-state lithium metal batteries

    … key challenges in lithium metal anode and composite cathodes, and realise high-performance solid-state batteries with fast charging capability and cycling stability.</p> <p><strong>Chapter 3</strong> investigates the effectiveness of multi-layered solid electrolytes in inhibiting lithium …

    oxford Restricted access

  7. Solid oxide fuel cell cathode infiltrate particle size control and oxygen surface exchange resistance determination

    … (MIEC) – micro-sized Ionic Conducting (IC) composite cathodes produced by the infiltration method have received much attention in the literature due to their low polarization resistance (RP) at intermediate (500-700°C) operating temperatures. Small infiltrated MIEC oxide nano-particle size …

    msu Repository record for Solid oxide fuel cell cathode infiltrate particle size control and oxygen surface exchange resistance determination (opens in a new tab)

  8. Development of Suspension Plasma Sprayed Lanthanum Perovskite Ceramic Layers for Clean Energy Technologies

    … energy technologies, i.e., solid oxide fuel cell cathodes and oxygen separation membranes. The materials of interest for this study include the mixed ionic and electronic conducting perovskite lanthanum strontium cobalt ferrite (LSCF), its composite with yttria-stabilized zirconia (YSZ), and the …

    toronto-retro Repository record for Development of Suspension Plasma Sprayed Lanthanum Perovskite Ceramic Layers for Clean Energy Technologies (opens in a new tab)

  9. Microstructure Engineering of All-Solid-State Composite Electrodes

    … enhanced safety and higher energy densities. Composite cathodes are pivotal in determining the areal capacity and specific energy of SSBs, making their design, fabrication and characterization an important research direction. This dissertation focuses on electrode microstructure engineering …

    houston Repository record for Microstructure Engineering of All-Solid-State Composite Electrodes (opens in a new tab) Embargoed until 2026-12-01

  10. A Plastic-Based Thick-Film Li-Ion Microbattery for Autonomous Microsensors

    … micropower system for autonomous microsensors. A composite porous electrode structure and a liquid state electrolyte were implemented in the microbatteries to achieve the high power capability and energy density. The use of single-walled carbon nanotubes (SWNTs) was found to significantly reduce …

    byu Repository record for A Plastic-Based Thick-Film Li-Ion Microbattery for Autonomous Microsensors (opens in a new tab) Download PDF for A Plastic-Based Thick-Film Li-Ion Microbattery for Autonomous Microsensors (opens in a new tab)

  11. Perovskite-related and trigonal RBaCo₄O₇-based oxide cathodes for intermediate temperature solid oxide fuel cells

    … x]O[subscript 6 +delta] and their composites with gadolinia-doped ceria (GDC) have been investigated. The electrical conductivity, TEC, and catalytic activity increase with increasing Co content. The composite cathodes exhibit enhanced electrochemical performance due to lower TEC …

    texas Repository record for Perovskite-related and trigonal RBaCo₄O₇-based oxide cathodes for intermediate temperature solid oxide fuel cells (opens in a new tab)

  12. Polymer Electrolytes for Rechargeable Lithium/Sulfur Batteries

    … sulfur/conductive polymer and sulfur/carbon composites. In the first part of the thesis, we introduce gel polymer electrolytes (GPEs) into Li/S batteries with sulfur–polyacrylonitrile (S/PAN) composite cathodes. GPEs, consisting of solid matrices and embedded liquid electrolytes, may …

    waterloo Repository record for Polymer Electrolytes for Rechargeable Lithium/Sulfur Batteries (opens in a new tab)

  13. Scalable Processing Routes for Solid-State Energy Conversion and Storage Devices

    … Four investigate scalable processes for SEs and composite cathodes for sulfide-based ASSBs and demonstrate how polymer affects dispersion stability and electrochemical properties. Chapter Three reveals how strict control of solid loading of a slurry prepared for tape casting SEs enables highly …

    houston Repository record for Scalable Processing Routes for Solid-State Energy Conversion and Storage Devices (opens in a new tab)

  14. Heteroatom-Functionalized Carbon Dots Supported Sulfur Cathodes for Lithium Sulfur Batteries

    … CDs were incorporated into sulfur/carbon composite cathodes, and electrochemical performance was evaluated using galvanostatic charge–discharge cycling, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and rate capability tests. The modified cathodes exhibit enhanced …

    concordia Download PDF for Heteroatom-Functionalized Carbon Dots Supported Sulfur Cathodes for Lithium Sulfur Batteries (opens in a new tab)

  15. Polyaniline Electrodes in Secondary Seawater Batteries: From Design to Mechanism

    … These findings guide the development of PANI-GO composite cathodes via a drop-casting strategy. The resulting binder-free electrodes show improved wettability, mechanical integrity, and charge transport. Overall, this work provides a rational and scalable framework for designing high-performance …

    unsw Repository record for Polyaniline Electrodes in Secondary Seawater Batteries: From Design to Mechanism (opens in a new tab) Embargoed

  16. Simple infiltrated microstructure polarization loss estimation (simple) model validation and its use in predicting solid oxide fuel cell cathode performance

    … (LSCF-GDC) nano-composite cathodes (NCCs) with different LSCF loading levels have been made by the infiltration method. The polarization resistance R<sub>P</sub> has been characterized by Electrochemical Impedance Spectroscopy, which decreases with the LSCF loading …

    msu Repository record for Simple infiltrated microstructure polarization loss estimation (simple) model validation and its use in predicting solid oxide fuel cell cathode performance (opens in a new tab)

  17. Factors Governing the Performance and Stability of Solid Oxide Fuel Cell Cathodes Prepared by Infiltration

    … and stability of solid oxide fuel cell cathodes. As a result, a number of microstructural and material properties, crucial for obtaining high electrode activity, were identified. In particular, the effect of varying the ionic conductivity of the porous electrolyte, the specific surface …

    penn Repository record for Factors Governing the Performance and Stability of Solid Oxide Fuel Cell Cathodes Prepared by Infiltration (opens in a new tab)

  18. Rationally Designed Metal-Organic Framework Materials for High Performance Lithium-Sulfur Batteries

    … or at the nodal structure, AQ-incorporated-MOF composite cathodes display improved cycle life and rate capability compared to sulfur/carbon electrodes. These findings provide insights into polysulfide electrochemistry in the presence of porous matrices, inspiring future designs of redox-active …

    jhu Repository record for Rationally Designed Metal-Organic Framework Materials for High Performance Lithium-Sulfur Batteries (opens in a new tab)

Page 1 of 2