Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Composite interface"”.

  1. A Composite Interface for Bioinformatics Applications (CIBA)

    … biology student is expected to possess. The Composite Interface for Bioinformatics Applications, or CIBA for short, was created to address this issue and allow educators to focus on teaching how the algorithms work as opposed to teaching how the command line works.

    rit Repository record for A Composite Interface for Bioinformatics Applications (CIBA) (opens in a new tab)

  2. Study of composite interface strength and crack growth monitoring using carbon nanotubes

    Interface strength of woven fabric composite layers was studied using Mode II fracture strength testing. Both carbon fiber and glass fiber composites were used with the vinyl ester resin. First, the single-step cured (i.e., co-cured) composite interface strength was compared to that of the two-step …

    nps Repository record for Study of composite interface strength and crack growth monitoring using carbon nanotubes (opens in a new tab)

  3. The Cryogenic Bonding Evaluation at the Metallic-Composite Interface of a Composite Overwrapped Pressure Vessel with Additional Impact Investigation

    … order to simulate the bond created at the liner-composite interface of an aluminum lined composite overwrapped pressure vessel. It was found that for cryogenic applications, a flexible, low modulus resin system must be used. Additionally, the samples prepared with a thin layer of cured resin – or …

    utahstate Repository record for The Cryogenic Bonding Evaluation at the Metallic-Composite Interface of a Composite Overwrapped Pressure Vessel with Additional Impact Investigation (opens in a new tab)

  4. The Application of Debond Length Measurements to Examine the Accuracy of Composite Interface Properties Derived From Fiber Pushout Testing

    … pristine and a transversely fatigued SiC/Ti-6-4 composite were conducted to assess the capabilities of this apparatus. A negligible force was required to slide the fibers in the fatigued samples at 400$\sp\circ$C, indicating that the fibers were debonded by the fatigue load. The identification of …

    uiuc Repository record for The Application of Debond Length Measurements to Examine the Accuracy of Composite Interface Properties Derived From Fiber Pushout Testing (opens in a new tab)

  5. Experimental study of composites and metal-wire joints

    In order to join a composite structure to a metallic structure, the metal-wire layers were co-cured with composite layers using the Vacuum Assisted Resin Transfer Molding (VARTM). Then, the interface fracture strength was measured for Mode II fracture for various lay-up and interface conditions. …

    nps Repository record for Experimental study of composites and metal-wire joints (opens in a new tab)

  6. Discrete Particle Dynamics Models: Computational Aspects And Applications

    … of nanomaterials modified fiber-reinforced composite for interface design. All these problems require large computational resources to parametrically address inherent uncertainties. Three major strategies are incorporated to address the inherent uncertainties and the resulting computational …

    embry-riddle Repository record for Discrete Particle Dynamics Models: Computational Aspects And Applications (opens in a new tab)

  7. Low-velocity impact damage in fibre metal laminates - A study of the impact resistance and metal-composite debonding

    … i.e. on the damage process along the metal-composite interface. The study reveals that the debond at the lowermost metal-composite interface forms in two stages. During the impactor loading phase, a debond tends to form as a fracture mode II cracking caused by out-of-plane shear forces. As …

    aalto Repository record for Low-velocity impact damage in fibre metal laminates - A study of the impact resistance and metal-composite debonding (opens in a new tab)

  8. The performance of nitinol shape memory alloy actuators embedded in thermoplastic composite material systems

    … of material systems usually consisting of a composite or hybrid material system with fibrous or distributed actuators, various sensors and a control system. One type of actuator being developed for intelligent material systems is made of nitinol or shape memory alloy wire. In order for …

    vt Repository record for The performance of nitinol shape memory alloy actuators embedded in thermoplastic composite material systems (opens in a new tab)

  9. Fabrication, characterization, and wettability analysis of a microstructured hybrid hydrophobic/hydrophilic surface

    … to the experimental data. Experiments suggest a composite interface for droplets resting on the surface due to increasing advancing and receding angles with tower spacing. Future work is anticipated to include droplet nucleation and growth experiments, and quantification of the thermal …

    uiuc Repository record for Fabrication, characterization, and wettability analysis of a microstructured hybrid hydrophobic/hydrophilic surface (opens in a new tab)

  10. Study of composite joint strength with carbon nanotube reinforcement

    Strengthening of composite joints is a topic of recent research. The benefits of using locally applied carbon nanotubes to reinforce a carbon fiber composite joint were studied. The effect of carbon nanotubes on enhancing the fracture toughness and joint interface strength was investigated by …

    nps Repository record for Study of composite joint strength with carbon nanotube reinforcement (opens in a new tab)

  11. Development of a 3D finite element model for quasi-static indentation of a Type 3 pressure vessel

    … of a metal liner enclosed by layers of composite material. Such structures are prone to unexpected damage during service, usually as a result of a low velocity impact. The capability of the cylinder to carry load in the presence of existing damage due to an impact event has not been …

    soton Download PDF for Development of a 3D finite element model for quasi-static indentation of a Type 3 pressure vessel (opens in a new tab)

  12. An experimental study of fiberglass composites containing metal wire joints

    … has been incorporating increasing amounts of composite materials during construction, especially in the areas of submarine sails and surface ship superstructures. The benefit of using composite material with metal wire layers imbedded is that these metal wire layers may be welded to the steel …

    nps Repository record for An experimental study of fiberglass composites containing metal wire joints (opens in a new tab)

  13. Direct shear behavior of composite concrete girders with tall haunches

    Composite bridges constructed using prestressed concrete (PSC) girders and concrete slabs may require haunches—a region of concrete that connects the bridge deck and girders—to maintain a uniform deck thickness despite camber, cross-slope, construction errors, and perhaps other reasons. The Texas …

    texas Repository record for Direct shear behavior of composite concrete girders with tall haunches (opens in a new tab)

  14. ULTRA-LOW WATER CONTACT ANGLE HYSTERESIS SURFACES: INTERFACIAL DESIGNS TOWARDS PRACTICAL APPLICATIONS

    … materials can support robust liquid/solid/air composite interface or highly dynamic interfaces when in contact with water, giving rise to negligible CAH and desirable longevity for practical applications. Besides, the correlation between materials properties (surface chemistry and morphology) …

    nus Repository record for ULTRA-LOW WATER CONTACT ANGLE HYSTERESIS SURFACES: INTERFACIAL DESIGNS TOWARDS PRACTICAL APPLICATIONS (opens in a new tab) Download file for ULTRA-LOW WATER CONTACT ANGLE HYSTERESIS SURFACES: INTERFACIAL DESIGNS TOWARDS PRACTICAL APPLICATIONS (opens in a new tab)

  15. The effects of carbon nanotube reinforcement on adhesive joints for naval applications

    … adhesive joint strength of various carbon fiber composite and steel joints was studied using Mode II fracture strength testing. The effect of the addition of multi-walled carbon nanotubes (MWNTs) to the adhesive was also studied. The effects of the MWNTs' diameter, length, concentration and …

    nps Repository record for The effects of carbon nanotube reinforcement on adhesive joints for naval applications (opens in a new tab)

  16. Creep behavior of the interface region in continuous fiber reinforced metal-matrix composites

    The accurate incorporation of interface effects on creep in metal matrix composites is contingent on the direct experimental determination of the deformation kinetics. The goal is accomplished by isolating the composite interface and precisely measuring the creep characteristics of the interface, …

    nps Repository record for Creep behavior of the interface region in continuous fiber reinforced metal-matrix composites (opens in a new tab)

  17. Fabricating Superhydrophobic and Superoleophobic Surfaces with Multiscale Roughness Using Airbrush and Electrospray

    … surface, it may either form a liquid-solid-vapor composite interface by which the liquid droplet partially sits on air pockets or it may wet the surface in which the water replaces the trapped air depending on the surface roughness and the surface chemistry. Super water repellent surfaces have …

    vcu Repository record for Fabricating Superhydrophobic and Superoleophobic Surfaces with Multiscale Roughness Using Airbrush and Electrospray (opens in a new tab)

  18. Long-Term Performance of Seismically Rehabilitated Corrosion -Damaged Columns

    … columns that are repaired using advanced composite materials (ACM). Although the success of ACM in upgrading the structural response of reinforced concrete columns has been established in the past, the long-term durability of structures retrofitted with these materials is not well known. …

    uiuc Repository record for Long-Term Performance of Seismically Rehabilitated Corrosion -Damaged Columns (opens in a new tab)

  19. Finite element analysis of composite tubes with integral ends subjected to bending loads

    … the effect of applied bending loads on laminated composite tubes. Elasticity-based linear models were developed using finite element software to predict stresses within the individual plies of the tubes. The tubes under investigation were graphite/epoxy laminated composites with a stacking …

    vt Repository record for Finite element analysis of composite tubes with integral ends subjected to bending loads (opens in a new tab)

  20. Biomass-based Redox-Active Composites for Capacitive Electrodes

    … (EDLC) and pseudocapacitance, were combined in composite electrodes. The EDLC materials of interest were high specific surface area (SSA), waste biomass-based activated carbons (ACs) to enhance sustainability, increase energy density and lower cost. The pseudocapacitance which further increased …

    toronto-retro Repository record for Biomass-based Redox-Active Composites for Capacitive Electrodes (opens in a new tab)

Page 1 of 2