Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 114 for “"Composite plate"”.
-
Analysis of combustion of a composite plate
The combustion of a porous graphite fiber plate is analyzed. A transient one-dimensional, mathematical model is utilized to conduct numerous computer tests. The model simulates the thermal response of a porous graphite fiber plate and it is based on appropriate energy equations. Two of the energy …
-
Seismic performance of Composite Plate Shear Walls
Composite plate shear wall (C-PSW) is a lateral resisting system primarily used to resist wind and earthquake loadings. A composite steel plate shear wall system consists of a steel plate shear wall with reinforced concrete panels attached to one side or both sides of the steel infill plates by …
-
Smart composite plate shape control using piezoelectric materials
… work, the shape control of fiber reinforced composite plate with embedded piezoelectric actuators is investigated. A finite element formulation is developed for modeling a laminated composite plate that has distributed piezoelectric actuators and sensors subjected to both mechanical and …
-
Nonlinear analysis of smart composite plate and shell structures
… and finite element solutions for laminated composite plate and shell structures with smart material laminae are presented in the study. A unified third-order shear deformation theory is formulated and used to study vibration/deflection suppression characteristics of plate and shell …
-
Bolted Splice Details for Composite Plate Shear Walls-Concrete Filled
Composite Plate Shear Walls—Concrete Filled (C-PSW/CF) consist of two steel faceplates with concrete infill sandwiched between them. This structural system has garnered national attention for implementation in non-seismic regions, where bolted connections are preferred over welded ones. This …
-
Aeroelasticity of Composite Plate Wings using HSDT and Higher-Order FEM
The aeroelasticity of composite wings is becoming an increasingly researched topic in aircraft design, as designers continue to replace aluminum alloy components with those made of composite materials because of their favorable strength-to-weight ratio, fatigue characteristics, and corrosion …
-
Analysis of After Impact Characteristics and Structural Optimization of CFRP Composite Plate
Low-velocity impact (LVI) on composites may cause Barely Visible Impact Damage (BVID), which is one of the most common damage types and may result in a decrease in strength of the composite. The objectives of this research were (a) to identify the characteristics of a carbon/epoxy composite plate …
-
Development of hybrid composite plate (HCP) for strengthening and repair of RC structures
… element for RC structures designated as “Hybrid Composite Plate (HCP)”. This prefabricated element is composed of a thin strain hardening cementitious composite (SHCC) plate reinforced with either near surface mounted CFRP (NSM-CFRP) laminates, designated as HCP(L), or externally bonded CFRP …
-
Failure analysis of a quasi-isotropic laminated composite plate with a hole in compression
The ability to predict failure of laminated composites in compression has been doggedly pursued by researchers for many years. Most have, to a limited extent, been able to predict failure for a narrow range of laminates. No means, as yet, exist for predicting the strength of generic laminates under …
-
Probability-based stability analysis of a laminated composite plate under combined in-plane loads
The probabilistic stability of a laminated composite plate is investigated. Three different models are considered in this study, namely, the classical laminated plate theory, a first-order shear deformation theory, and a higher-order shear deformation theory. The probabilistic characteristics, such …
-
Nonlinear finite element analysis of a laminated composite plate with nonuniform transient thermal loading
Metal plates are being replaced by lighter but equally strong laminated composite plates in order to improve efficiency and increase performance of aerospace vehicles. But because of the complex construction of laminated plates they are very difficult to analyze. Conventional thin plate theories …
-
Integrity of the adhesive bonding in steel beams strengthened with a carbon fibre composite plate
… metallic beams strengthened with a bonded CFRP plate. However, the design method and technique are not sophisticated, and some specific areas require further research. In this technique, the structural adhesive bonding is the most distinct element to be considered. The main aspects discussed in …
-
Percussion-Based Single and Multi-Bolt Looseness Detection and Composite Plate Delamination Detection Using Machine Learning
… machine learning to real-world applications. Composite plates made of carbon fiber and aluminum with a sandwiched layer of closed-cell foam and epoxy are used to simulate carbon fiber delamination for the purpose of educating students in machine learning topics. A grid system is implemented, …
-
Multi-level technique for stiffness and strength calculations of woven fabric composite plate and shell structures
… and strength behavior of the woven fabric composite materials mainly depend on the properties of the fiber and matrix materials. A technique was developed to design and analyze woven fabric composites based on the micro-level properties of the fiber and matrix materials. The technique is …
-
Inelastic Behavior of Three-Story Buildings with Concrete-Filled Composite Plate Shear Walls Subjected to Wind Loads
… of a three-story building with concrete-filled composite plate shear walls subjected to wind loads. To explore the potential for inelastic design, two types of planar composite shear wall buildings are examined: individual shear walls designed using an elastic approach, and coupled shear wall …
-
A Comparison of Beamforming Characteristics in Isotropic and Composite Plate Structures for use in Structural Health Monitoring
Structural health monitoring in plate-like simple structures using phased array beamsteering of guided Lamb waves is useful in damage detection and evaluation efforts. Lamb waves can be effectively used for beamsteering using a linear array. The experimentation primarily focuses on beamsteering in …
-
Development of Curved-Plate Elements for the Exact Buckling Analysis of Composite Plate Assemblies Including Transverse-Shear Effects
The analytical formulation of curved-plate non-linear equilibrium equations including transverse-shear-deformation effects is presented. The formulation uses the principle of virtual work. A unified set of non-linear strains that contains terms from both physical and tensorial strain measures is …
-
Experimental and Analytical Inelastic Behavior of C- and T- Shaped Composite Plate Shear Walls/Concrete-Filled (C-PSW/CF)
A Composite Plate Shear Wall/Concrete Filled (C-PSW/CF) is a special lateral-force resisting system consisting a sandwiched panel of two steel plates with concrete infill in between them, ideally suited for core-wall structures in high-rise construction. The steel plates are connected to each other …
-
Shape Optimization of a Sandwich Composite Plate with Low-Velocity Impact Loading and Effect of Finite Difference Sensitivity Analysis
… A typical spacesuit is made of sandwich composite material and designed to withstand various pressure and loading conditions while also considering the safety and comfort of the astronauts. One of the critical load cases in spacesuit design is a low-velocity impact (LVI) which may occur …
-
An experimental study to determine the reduction in ultimate bending moment of a composite plate due to an internal delamination.
… of internal delaminations in a graphite -epoxy composite plate on the plate's ultimate bending moment. The experiments were conducted using 4-inch by 7-inch specimens with a balanced ±45 90 , 8-ply layup. The delaminations were created by inserting a thin teflon disc between two lamina during …
Page 1 of 6