Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Compression After Impact CAI"”.
-
Tolerância ao dano devido ao impacto de baixa velocidade em compósito não convencional (double-double)
… of 0º, ±45º and 90º. In this study, low-velocity impact response of a double-double (DD) laminate and a quadriaxial laminate of equivalent in-plane stiffness and same thickness were compared. Carbon/epoxy laminates were produced with stacking sequences of [±0/±50]10 and [03/90/±45/02/±45]2S, …
-
Damage Control Measures in Composites: Focus on Damage Tolerance of Aerospace Structures
Barely Visible Impact Damage (BVID) in composite materials presents a stealthy yet significant risk to structural integrity, particularly challenging due to its elusive nature. The approach adopted here diverges from traditional methodologies, focusing on the novel application of Digital Image …
-
Estudo da tolerância ao dano em compósitos de vidro/epóxi double-double sob impacto de baixa velocidade
… e DD [±15/±75]4T - through uniaxial compression, low-velocity impact (LVI), and compression-after-impact (CAI) tests conducted at four nominal energy levels (30 J, 45 J, 60 J, and 74 J). The results demonstrate that, for the configurations investigated, replacing the quadriaxial …
-
MODELLING DAMAGE IN COMPOSITES SUBJECTED TO IMPACT AND COMPRESSION AFTER IMPACT
Composites are prone to impact damage, which can reduce the compressive residual strength significantly. Therefore, it is essential to design composite structures for damage tolerance. It is important to better understand failure mechanisms to develop more efficient design strategies. Advanced …
-
Resistência e tolerância ao dano em laminados carbono/epóxi com layup tradicional e layup double-double sob impacto de baixa velocidade
… laminates were assessed by performing uniaxial compression tests, low-velocity impact tests with three nominal energy levels (30 J, 45 J, and 74 J) and compression after impact (CAI) tests. Additionally, damage mechanisms were evaluated through X-ray computed tomography, and a mathematical model …
-
Resistência residual após impacto em compósitos híbridos de matriz estér vinílica reforçada por fibra de vidro e Kevlar
… a material it is subjected to various types of impact due to the fall of elements of high or low mass and speed. Among the impacts, the low speed is considered the most common request, when considering typical situations of use where these impacts can cause internal damage in the material …
-
Estudo da resistência residual de compósitos poliméricos de fibra de vidro-e e kevlar 49 após sofrerem impacto de baixa velocidade
… reduced by the occurrence of low speed impacts. These impacts can cause internal damage to the material and compromise its integrity. Thus, the present study aims to perform an experimental analysis of the residual resistance to three-point flexural test and compression after impact …
-
Durability of polymeric composites after elevated temperature aging
The Compression After Impact (CAI) strength of polymeric composites after long term elevated temperature aging is studied. Aging temperatures range from 149$\sp\circ$C to 204$\sp\circ$C (300$\sp\circ$F to 400$\sp\circ$F). Two types of matrix material are studied, a thermoset bismaleimide (5260) and …
-
Residual Compressive Strength Prediction of Carbon/Epoxy Laminates Subjected to Low Velocity Impact Damage
Low energy impact damage to a composite structure is difficult to detect and can have profound effects on compressive strengths. Low energy impact damage is sometimes termed as barely visible impact damage (BVID). Detecting BVID is only possible by implementing nondestructive testing (NDT) …
-
Manufacturing, Processing and Mechanics of Fiber Reinforced Vitrimer Composites
… while the second investigates the low velocity impact (LVI) and compression after impact (CAI) behavior of vitrimer-based carbon fiber composites. The first part of the dissertation proposes a hypothesis that ultrasonic welding can be used to assemble and weld fiber-reinforced vitrimer …
-
Compression After Impact Experiments and Analysis on Honeycomb Core Sandwich Panels with Thin Facesheets
A better understanding of the effect of impact damage on composite structures is necessary to give the engineer an ability to design safe, efficient structures. Current composite structures suffer severe strength reduction under compressive loading conditions, due to even light damage, such as from …
-
Compression After Impact Load Prediction in Graphite/Epoxy Laminates Using Acoustic Emission and Artificial Neural Networks
… neural networks (ANNs) in predicting the compression after impact (CAI) load of graphite/epoxy laminates from acoustic emission (AE) nondestructive testing (NDT) data. Thirty-four 24-ply bidirectional woven cloth laminate coupons were constructed and impacted at various energy levels …
-
Simulation and testing of low velocity impact damage and compression after impact for polymer matrix composite laminates.
Barely visible impact damage (BVID) from low-energy impacts may result in severe degradation of strength and stiffness of a polymer matrix composite laminate, yet the mechanisms of damage initiation and propagation are not fully understood. In this research, we propose a three-dimensional finite …
-
Virtual Testing of Aerospace Composite Laminates: Impact and Fatigue
… is the residual compressive strength of panels after low-velocity impacts (LVI), which can occur during manufacturing, maintenance, or service and often cause severe internal damage with little visible indication. To evaluate the effect of impact damage on structural integrity, …
-
Application of fracture mechanics to predict the growth of single and multi-level delaminations and disbonds in composite structures
… composite structures subjected to barely visible impact damage (BVID). The advantages of fracture mechanics-based methodologies to predict interlaminar failure in composite structures were identified, from which the crack tip element (CTE) approach and the virtual crack closure technique (VCCT) …
-
Effect Of Impact Damage On Compression-Compression Fatigue Behavior Of Sandwich Composites
… research work was to investigate the effect of impact damage on in-plane buckling and compression-compression fatigue behavior for a new sandwich structure made from E-glass/epoxy face sheets over end-grain balsa wood core. Low velocity impact tests were carried out using a drop-weight impact …
-
Neural Network Prediction of Ultimate Compression After Impact Loads in Graphite-Epoxy Coupons from Ultrasonic C-Scan Images
… could predict the ultimate compressive loads of impact damaged 24-ply graphite-epoxy coupons from ultrasonic C-scan images. The 24-ply graphite-epoxy coupons were manufactured with bidirectional preimpregnated tape and cut into 21 coupons, 4 inches by 6 inches each. The coupons were impacted at …
-
Mechanical Performance and Failure of Laminated Composites Made by Automated Fibre Placement (AFP) Process
… of knowledge in studying the out-of-plane and impact response of the composite laminates. The main objective of this research study is to investigate the effect of induced tow-gaps on the Low-Velocity Impact (LVI) response and Compression After Impact (CAI) response of the thin composite …
-
Damage assessment of particle-toughened carbon fibre composites subjected to impact and compression-after-impact using 3D X-ray tomography
… the toughening behaviour leading to increased impact damage resistance and post-impact compression damage tolerance performance. To achieve this, mechanical testing and conventional ultrasonic C-scan methods were combined with damage assessments using several 3D X-ray computed tomography …
-
Advancing double-double composite laminates as next-generation alternatives to traditional quad laminates
… and out-of-plane mechanical performance and impact damage tolerance of DD architectures.<br/><br/>Sufficient through-thickness homogenisation of the laminate eliminates undesirable out-of-plane distortions commonly observed in asymmetric composite laminates. While DD homogenisation criteria …
Page 1 of 2