Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 326 for “"Compression Testing"”.

  1. Failure Properties and Phenomena for Zircaloy-4 from Ring Compression Testing

    … at room temperature was developed for ring compression tests through experimental and computational evaluation. The hydrogen content was varied up to 610 weight parts per million so that failure was consistently ductile. A Gurson-based approach for ductile damage was used to model material …

    ut-knoxville Repository record for Failure Properties and Phenomena for Zircaloy-4 from Ring Compression Testing (opens in a new tab)

  2. Plane strain compression testing of aluminum alloy 6061 at elevated temperatures

    … stress - strain curves from hot plane strain compression tests. The recent use of computer models to simulate hot working processes requires experimental values for their appropriate implementation and verification. Therefore, there exists the need to have adequate testing methods to obtain …

    ubc Repository record for Plane strain compression testing of aluminum alloy 6061 at elevated temperatures (opens in a new tab) Download PDF for Plane strain compression testing of aluminum alloy 6061 at elevated temperatures (opens in a new tab)

  3. Development of a constrained piston method for compression testing of carbon foams

    … purpose of this study is to develop a standard compression test for gathering mechanical strength properties, namely yield stress, modulus, and energy absorption all during a single compression test. Several carbon foams were tested using both the novel constrained method (developed herein) and …

    wvu Repository record for Development of a constrained piston method for compression testing of carbon foams (opens in a new tab)

  4. Design and construction of a motor-actuated sea ice compression testing machine

    … emphasis on developing a specialized sea ice compression testing machine. The machine, designed for harsh sub-zero and saline conditions, would facilitate the immediate testing of ice samples onboard the SA Agulhas II vessel. The research entailed designing and constructing a compression …

    cape-town Repository record for Design and construction of a motor-actuated sea ice compression testing machine (opens in a new tab)

  5. Comparison of Two Loading Surface Preparation Methods on Rat Vertebral Bodies for Compression Testing

    … bodies are often mechanically tested in uniaxial compression in order to determine whether or not the mechanical properties of the bone in ovariectomized rats improve with treatment. The irregular shape of rat vertebral bodies requires some specimen preparation to create two parallel loading …

    queens Repository record for Comparison of Two Loading Surface Preparation Methods on Rat Vertebral Bodies for Compression Testing (opens in a new tab)

  6. <em>In Situ</em> TEM Micropillar Compression Testing in Irradiated Oxide Dispersion Strengthened Alloys

    … transmission electron microscopy (TEM) micro-compression of pillars in as received and ion-irradiated Fe-9%Cr oxide dispersion strengthened (ODS) alloy. The growing role of charged particle irradiation in the evaluation of nuclear reactor candidate materials requires the development of novel …

    boise Repository record for <em>In Situ</em> TEM Micropillar Compression Testing in Irradiated Oxide Dispersion Strengthened Alloys (opens in a new tab)

  7. Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus

    … researchers are faced with the problem of testing prospective metals at high strain rates. So far it has been assumed that, relative to the cooling time, the deformation time is practically instantaneous indicating that the test is adiabatc: none of the heat generated within the metal is …

    lethbridge Repository record for Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus (opens in a new tab)

  8. Effects of CNTs in polymer nanocomposite pillars fabricated through Two-Photon Polymerization

    … options on pillar geometry. As for mechanical testing, micro- compression testing was conducted on all pillars. In particular, size effects in pure polymer pillar structures fabricated via 2PP and effects of CNTs on the mechanical properties of polymer nanocomposites from micro-compression …

    washington Repository record for Effects of CNTs in polymer nanocomposite pillars fabricated through Two-Photon Polymerization (opens in a new tab)

  9. MEMS-based Mechanical Characterization of Micrometer-sized Biomaterials

    … were constructed to perform the micro-scale compression testing of microcapsules. The force sensors are capable of resolving forces up to 110μN with a resolution of 33.2nN along two independent axes. The force sensors were applied to characterizing the mechanical properties of hydrogel …

    toronto-retro Repository record for MEMS-based Mechanical Characterization of Micrometer-sized Biomaterials (opens in a new tab)

  10. Refining Methods to Quantify Irradiation Hardening

    Micro-mechanical testing, particularly micropillar compression, offers a promising method for assessing irradiation hardening. This study aims to refine these techniques to provide more accurate measurements that better reflect macro-mechanical behavior, enhancing our understanding of …

    tamu Repository record for Refining Methods to Quantify Irradiation Hardening (opens in a new tab)

  11. An elastic plastic approach, modeling deformation of dense sand

    … pressure conditions (80 MPa in one dimensional compression and a confining pressure of 7.2 MPa in triaxial testing) and high temperatures (up to 100C). The behaviour of the dilative sand could be successfully described by using elastic plastic concepts. The triaxial testing program used modified …

    manitoba Repository record for An elastic plastic approach, modeling deformation of dense sand (opens in a new tab)

  12. In-situ transmission electron microscopy study of dislocation in TI-6AL-4V

    In-situ TEM compression testing is able to probe quantitatively the mechanical response of materials with simultaneous imaging of the deformation microstructure evolution. Ti-6Al-4V (Ti64), known for high strength, is the most widely used Ti alloy. A better understanding of the plastic deformation …

    birmingham Download PDF for In-situ transmission electron microscopy study of dislocation in TI-6AL-4V (opens in a new tab)

  13. A Novel Method for the Evaluation of Mechanical Properties of Cancellous Bone in the Rat Distal Femur

    … cancellous specimens were subjected to uni-axial compression testing to evaluate the mechanical properties. Furthermore, the new method is evaluated by directly applying it to a study investigating the effects of estrogen replacement therapy in post-menopausal osteoporosis as simulated by the …

    tamu Repository record for A Novel Method for the Evaluation of Mechanical Properties of Cancellous Bone in the Rat Distal Femur (opens in a new tab)

  14. Microstructural And Mechanical Characterization Of Al-al2o3 Nanocomposites Synthesized By High-energy Milling

    … then subjected to mechanical characterization by compression testing and nanoindentation techniques. The strength and elastic modulus values obtained from compression testing showed an increase with increasing volume fraction and decreasing particle size of the reinforcement. The nanoindentation …

    ucf Repository record for Microstructural And Mechanical Characterization Of Al-al2o3 Nanocomposites Synthesized By High-energy Milling (opens in a new tab)

  15. Fabrication and characterization of vat photopolymerized hydrogel scaffolds for biomedical applications

    … dynamic mechanical analysis (DMA), and compression testing. Compression testing was used to evaluate the mechanical integrity of the scaffolds across 50% to 80% porosities, 3mm x 3mm x 3mm to 6mm x 6mm x 6mm unit cell sizes, and 25:1 to 500:1 crosslinker concentrations. Cell viability …

    iastate Repository record for Fabrication and characterization of vat photopolymerized hydrogel scaffolds for biomedical applications (opens in a new tab)

  16. Temperature Dependent Mechanical Behavior of Solid Acids

    … nanoindentation and corroborated using uniaxial compression testing. To facilitate nanoindentation creep result interpretation, a radial flow model of power law indentation creep is developed. This model is compared with the related model from Bower, et. al. for several pre-existing literature …

    utk-theses Repository record for Temperature Dependent Mechanical Behavior of Solid Acids (opens in a new tab)

Page 1 of 17