Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 598 for “"Compression tests"”.

  1. Triaxial compression tests on an undisturbed sensitive clay

    … of both drained and undrained triaxial tests are considered. The drained and undrained shear strengths are compared for both the maximum principal stress difference and the maximum effective principal stress ratio failure criteria. An attempt is made to correlate the drained and …

    ubc Repository record for Triaxial compression tests on an undisturbed sensitive clay (opens in a new tab) Download PDF for Triaxial compression tests on an undisturbed sensitive clay (opens in a new tab)

  2. Unconfined Compression Tests on Basalt Rocks from Hawaii

    Unconfined compression tests were performed on 66 basalt samples to obtain index properties and elastic constants. The samples were obtained from a boring drilled at the University of Hawaii at Manoa. These values were compared to results obtained from other studies to determine correlations and …

    hawaii Repository record for Unconfined Compression Tests on Basalt Rocks from Hawaii (opens in a new tab)

  3. Measurement and simulation of triaxial compression tests for a sandy loam soil

    … In this study, unconsolidated undrained triaxial compression tests were performed to study the effects of moisture level and confining pressure on a sandy loam soil. The soil specimens tested had three moisture levels, and they were high (27-29% d.b.), medium (19-21% d.b.) and low (9-11% d.b.). …

    manitoba Repository record for Measurement and simulation of triaxial compression tests for a sandy loam soil (opens in a new tab)

  4. Geosynthetic Reinforced Soil: Numerical and Mathematical Analysis of Laboratory Triaxial Compression Tests

    … analyses were performed for laboratory tests obtained from the published literature of GRS under triaxial compression in consolidated-drained conditions. A three-dimensional numerical model was developed using FLAC3D. An existing constitutive model for the soil component was modified to …

    vt Repository record for Geosynthetic Reinforced Soil: Numerical and Mathematical Analysis of Laboratory Triaxial Compression Tests (opens in a new tab)

  5. Experimental analysis of the post-failure behavior of coal and rock under laboratory compression tests

    … to the failure path observed in a conventional compression tests. Researchers in past had used stiff system for generating the post failure behavior of the rock and the results produced from these tests were applied to tunneling and hard rock mining. In addition, with the advent of computing …

    wvu Repository record for Experimental analysis of the post-failure behavior of coal and rock under laboratory compression tests (opens in a new tab)

  6. Behaviour of Compacted Regina Clay in Confined Undrained Triaxial Compression Tests – Undrained Shear Strength and Pore Pressure Parameters

    … setups. The confined undrained triaxial compression (CUTC) test without pore pressure measurement, a simpler test that can be done at most geotechnical laboratories, was used in this study. Regina clay samples were prepared at three moisture contents (22%, 26%, and 30%) and compacted …

    calgary Repository record for Behaviour of Compacted Regina Clay in Confined Undrained Triaxial Compression Tests – Undrained Shear Strength and Pore Pressure Parameters (opens in a new tab)

  7. Experimental Study on Rock Deformation and Permeability Variation

    … and its impact on axial permeability. Triaxial compression tests were conducted on Berea sandstone, Indiana limestone, Westerly granite and tuff specimens. Axial permeability was continuously measured for Berea sandstone and Indiana limestone during triaxial compression tests. The axial …

    tamu Repository record for Experimental Study on Rock Deformation and Permeability Variation (opens in a new tab)

  8. Estabilização de um solo fino laterítico pelo ácido fosfórico

    … work was carried out mainly through unconfined compression tests in order to observe the influence on strength of the following variables. I- Percentage of phosphoric acid (on a dry soil weight basis); II- Amount of solution used in compacting the soil; III- Curing time; IV- Compaction energy; …

    brazil-uerj Repository record for Estabilização de um solo fino laterítico pelo ácido fosfórico (opens in a new tab)

  9. Use of EPS-Filled Tires as Lightweight Construction Material

    … hollow space of the tires. The observation from compression tests on used tires revealed that the tread wall of these tires bent toward their own center. This inward deformation should provide confining stress to the contained EPS, and thus the compressive strength of EPS-tire composite was …

    odu Repository record for Use of EPS-Filled Tires as Lightweight Construction Material (opens in a new tab)

  10. Simulation of hot working of austenitic stainless steels.

    … steels are reviewed. Isothermal plane strain compression tests have been carried out with the purpose of determining relationships to describe the kinetics of static recrystallization, the recrystallized grain size, the isothermal grain growth rate and the strength during hot rolling of …

    whiterose Download PDF for Simulation of hot working of austenitic stainless steels. (opens in a new tab)

  11. An investigation of the rheology and indentation response of vegetable shortening using finite element analysis

    … vegetable shortening were obtained from uniaxial compression tests, including monotonic and cyclic compression, as well as creep and stress relaxation tests. The fundamental parameters obtained from the various compression tests were then used in two mechanical models (viscoelastic and …

    manitoba Repository record for An investigation of the rheology and indentation response of vegetable shortening using finite element analysis (opens in a new tab)

  12. Compression and Flow Behavior of Proppants in Hydraulically Induced Fracture

    Short-term and long-term compression behavior of single proppant grains were thoroughly studied by diametrical compression tests and DEM/FEM simulations. Hydroprop showed the highest single grain crush-resistance while ceramic proppant grains with coarse surfaces were susceptible to creep behavior …

    calgary Repository record for Compression and Flow Behavior of Proppants in Hydraulically Induced Fracture (opens in a new tab)

  13. Analysis of pore water stress in Lake Agassiz clay through a separation of the volumetric and deviatoric components of stress

    … pressure was determined by means of isotropic compression tests... The relationship between the induced pore pressure and the octahedral shear stress, or the pore pressure parameter ~, was investigated by means of constant octahedral normal triaxial compression tests... To assess the validity …

    manitoba Repository record for Analysis of pore water stress in Lake Agassiz clay through a separation of the volumetric and deviatoric components of stress (opens in a new tab)

  14. Experimental investigation static liquefaction of lightly cemented sands

    … cemented sands. Undrained and drained triaxial compression tests, one dimensional consolidation, high stress compression, and unconfined compression tests were performed on artificially prepared lightly cemented loose samples with cement-sand ratios of 2, 4 and 6%. Additional tests were also …

    unsw Repository record for Experimental investigation static liquefaction of lightly cemented sands (opens in a new tab)

  15. Mechanical response of fiber-reinforced soil

    … testing program, including series of triaxial compression tests, triaxial extension tests, fiber tensile tests, and specially designed fiber-pullout tests, was conducted in this research to validate and refine the discrete design methodology. vii The behavior of fiber-reinforced soil, which is …

    texas Repository record for Mechanical response of fiber-reinforced soil (opens in a new tab)

  16. Experimental and finite element investigation of ultrasonic metal forming applications

    … study of ultrasonic vibration assisted tension tests, and ring and cylindrical specimen compression tests, finite element (FE) models under quasi-static loading were first developed to gain insight into material and interface mechanisms. FE simulations of the metal material included the effects …

    glasgow Download PDF for Experimental and finite element investigation of ultrasonic metal forming applications (opens in a new tab)

  17. Physical modeling and finite element analysis of friction encountered in large deformation processes

    … types of plasticine were determined from several compression tests. Compression test data were analyzed by using a statistical method, 2 factorial design, in order to identify the effects of deformation speed, lubrication and material type on friction and the mechanical behaviors of the materials. …

    ttu Repository record for Physical modeling and finite element analysis of friction encountered in large deformation processes (opens in a new tab)

Page 1 of 30