Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Compression-Compression Fatigue"”.

  1. Effect Of Impact Damage On Compression-Compression Fatigue Behavior Of Sandwich Composites

    … effect of impact damage on in-plane buckling and compression-compression fatigue behavior for a new sandwich structure made from E-glass/epoxy face sheets over end-grain balsa wood core. Low velocity impact tests were carried out using a drop-weight impact tower by impacting the sandwich beam at …

    wayne-thes Repository record for Effect Of Impact Damage On Compression-Compression Fatigue Behavior Of Sandwich Composites (opens in a new tab)

  2. Damage development under compression-compression fatigue loading in a stitched uniwoven graphite/epoxy composite material

    Damage initiation and growth under compression-compression fatigue loading were investigated for a stitched uniweave material system with an underlying AS4/3501-6 quasi-isotropic layup. Performance of unnotched specimens having stitch rows at either 0° or 90° to the loading direction was compared. …

    vt Repository record for Damage development under compression-compression fatigue loading in a stitched uniwoven graphite/epoxy composite material (opens in a new tab)

  3. Influence of Stitching Pattern on the Fibre Misalignment and Compression Behaviour of Non-Crimp Fabric Composite Materials

    … metric in the determination of composite compression strength, and understanding the severity of the fibre misalignment in these fabrics is key to understanding their behaviour in compression, both statically and in fatigue. Non-Crimp Fabrics may be stitched with a variety of stitching …

    auckland-ms Repository record for Influence of Stitching Pattern on the Fibre Misalignment and Compression Behaviour of Non-Crimp Fabric Composite Materials (opens in a new tab)

  4. Experimental investigation of fatigue behavior of adhesively-bonded glass fiber joints

    The fatigue behavior of adhesively-bonded laminates made out of glass fiber reinforced plastics was experimentally investigated and modeled under constant amplitude loading. Double strap lap joints were examined under seven various stress-ratios (R) denoting the ratio of minimum to maximum cyclic …

    nwu-za Repository record for Experimental investigation of fatigue behavior of adhesively-bonded glass fiber joints (opens in a new tab)

  5. Fatigue behaviour of a barely visible impact damaged carbon fibre reinforced epoxy laminate

    … the progression of post-impact static and fatigue damage of composite laminates. Quasi-isotropic carbon/epoxy specimens were impacted at energy levels of 35 J and 50 J. The initial damage was characterized using ultrasonic C-scan and thermography. Residual strength testing revealed that the …

    manitoba Repository record for Fatigue behaviour of a barely visible impact damaged carbon fibre reinforced epoxy laminate (opens in a new tab)

  6. Environmental effects on stitched RTM composites

    … fabric were determined. Data presented include compression strengths and compression-compression fatigue results for environmentally cycled and uncycled composites. Ten1perature cycling ranged from 60°C to -55°C. The relative humidity varied between 95 percent at the high temperature and a …

    vt Repository record for Environmental effects on stitched RTM composites (opens in a new tab)

  7. The Effectiveness of Damage Arrestment Devices in Delaying Fastener-Hole Interaction Failures in Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected to Static and Dynamic Loading Under Increased Temperatures

    … devices (DADs), were subjected to monotonic compression at a rate of 5mm per second, and compression-compression fatigue at 50% yield at an amplitude of 65%, under temperatures of 75, 100, 125, 150, 175, and 200 °F. The sandwiches tested were composed of two-layer cross-weave carbon fiber …

    calpoly Repository record for The Effectiveness of Damage Arrestment Devices in Delaying Fastener-Hole Interaction Failures in Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected to Static and Dynamic Loading Under Increased Temperatures (opens in a new tab)

  8. Laser Powder Bed Fusion Additive Manufacturing of Fe-based Shape Memory Alloys for Biomedical Applications

    … phase constitution, corrosion behaviour, and fatigue performance. The relationship between process-induced microstructure and accelerated degradation rates in simulated physiological conditions is carefully explored by evaluating the formation and characteristics of corrosion products. The …

    unsw Repository record for Laser Powder Bed Fusion Additive Manufacturing of Fe-based Shape Memory Alloys for Biomedical Applications (opens in a new tab) Embargoed

  9. Deformation and Fatigue Behavior of Bulk-Metallic Glasses (BMGs)

    … 2) to investigate the loading mode effect on the fatigue behavior of BMGs.</p> <p>The main results are obtained as follows. At room temperature, during the inhomogeneous deformation, BMGs show the strain softening caused by the increase of the free volume in the shear bands. However, BMGs have a …

    utk-theses Repository record for Deformation and Fatigue Behavior of Bulk-Metallic Glasses (BMGs) (opens in a new tab)

  10. Cracking Behaviour of Glass Fibre-Reinforced Polymers under Combined Compression-Shear Cyclic Loading

    … types were subjected to combined transverse compression-shear loading: multidirectional laminates with generalized layups [0₂/θ₂/0₂/-θ₂]S and tubular laminates with layup [0F/90]S. Unidirectional and woven prepregs were obtained from Composite Materials Italy and manufactured into panels and …

    waterloo Repository record for Cracking Behaviour of Glass Fibre-Reinforced Polymers under Combined Compression-Shear Cyclic Loading (opens in a new tab)

  11. Metallurgical and Mechanical Properties of Additively Manufactured Cellular Structures

    … loads since most of the implants experience compression loads during their operation. Nevertheless, the implants also undergo fatigue loading due to day-to-day activities and tensile loads when the implant is loose or when the host performs an extensive physical activity. Therefore, designing …

    trento Repository record for Metallurgical and Mechanical Properties of Additively Manufactured Cellular Structures (opens in a new tab)