Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Compressive stress-strain"”.
-
Compressive Stress-strain of Unreinforced Masonry Boundary Element Prisms
… C-shaped blocks) or regular stretchers. The compressive stress-strain response of the masonry BEs prisms built using stack-bonded C-shaped blocks (C-MSBEP) vary from that of regular stretchers prisms due to the continuity of the grout core (i.e. absence of block’s webs) and the higher …
-
Compressive Behaviour of C-Shaped Confined Masonry Boundary Elements
… reinforced boundary elements at the wall most stressed zone (i.e. wall ends). Evaluating the compression behaviour of the boundary elements is key for predicting the seismic response of the RM shear walls. Unlike reinforced concrete (RC), the experimental studies that focused on compressive …
-
Experimental Characterization of the Compressive Behaviour of Gas Diffusion Layers in PEM Fuel Cells
… (GDL) of the MEA is highly influenced by applied compressive load. Compression of the GDL changes its porosity and microstructure, which will conse- quently change the physical properties of the GDL. Hence to improve the properties of the GDL, understanding its compressive behaviour is crucial. In …
-
Characterization and Modeling of Polymer -Treated and Nano Particle Modified Sulfate Contaminated Soils, Drilling Muds, and Hydraulic Fracturing Fluids under Groundwater
… investigated. The variation of the compacted compressive and tensile strength with calcium sulfate concentrations for the treated soils were quantified. Compressive stress-strain relationships of the sulfate soil, with and without lime and polymer treatment, have been quantified using two …
-
Synthesis and development of boron nanotubes and metal/ceramic-carbon nanotube composites
… and mechanical measurements, which include compressive stress-strain and hardness measurements. Compressive stress-strain measurements on nanotube composites of stainless steel mixed with some iron showed a yield strength increase of 153% (relative to a similarly produced pellet without …
-
Dynamic behavior and fatigue performance of closed cell aluminum foams reinforced with graphene nanoplatelets and carbon nanotubes
… engineering systems [1][2]. Their compressive stress–strain response is typically divided into three regimes: an initial linear elastic region governed by bending of intact cell walls, a long plateau region associated with progressive cell-wall buckling and collapse, and a …
-
Mechanical characterisation of Nb3Sn Rutherford cable stacks
… as the superconducting filaments are brittle and strain sensitive. A mechanical over loading of the filaments lead to irreversible conductor damage. The designs of 11 and 16 T magnets are supposed to push the conductor towards its mechanical and electrical performance limitations. The magnetic field …
-
Effects of thermo-mechanical processing on aluminum-magnesium alloys containing high weight percentage magnesium
… eutectic temperature, as appropriate, to a true strain of 1.5. These alloys were then evaluated by compressive stress - strain testing at various temperatures and strain rates to determine both the ambient and elevated temperature characteristics. Due to the inability to produce very fine second …
-
Process mechanics and surface integrity of low plasticity burnishing of SE508 Nitinol alloy
… by ball burnishing of the material. The stress-strain behaviors of SE508 NiTi alloy at quasi-static and high strain rates were experimentally determined using a series of compression testing. Then, the experimentally determined stress-strain behavior was used in correlation with Hertzian …
-
CHARACTERIZATION OF SENSING REPAIR MATERIALS
… cement based structural grouting materials with compressive strengths in the range of 30 to 70 MPa were modified to have sensing capabilities. Piezoresistivity was considered as the sensing property and materials were tested under various service conditions in terms of strength and sensitivity. …
-
Ultimate Limit State Response of Reinforced Concrete Columns for Use in Performance-Based Analysis and Design
… this research is to develop a model for the full compressive behavior of longitudinal steel including the effects of bar buckling. A computational algorithm is developed whereby experimental data can be rigorously modeled. An analytical model is developed from rational mechanics for modeling the …
-
Influence of temper condition on the nonlinear stress-strain behavior of boron-aluminum
… influence of temper condition on the tensile and compressive stress-strain behavior for six boron-aluminum laminates was investigated. In addition to monotonic tension and compression tests, tension-tension, compression-compression, and tension-compression tests were conducted to study the effects …
-
Sub-Micron Indium Pillar Fabrications
… This size effect was explained by the strain gradient. Atomic simulations have shown that yield stress depends on size even in the absence of the strain gradient. All of the experiments done on material creep behaviour, reported in the literature, have been conducted in the presence of …
-
An empirical approach to simulate the concrete softening mechanism.
… most commonly used material properties is the compressive stress strain σ-ε relationship. Uniaxial compression tests on concrete cylinders are used to obtain these material properties of concrete in compression. These tests are effective up to peak stress, but have limited applicability …
-
Mechanics and Design of Prestressed Girder Bridges using Ultra High-Performance Concrete
The aim of this study is to propose stress-strain models which predict the material behavior in compression and tension, analyze the moment-curvature behavior of UHPC structural sections and to demonstrate the design of an UHPC bridge. A detailed literature review of the past studies on …
-
CIRCULAR RC COLUMNS PARTIALLY CONFINED WITH FRP
… (or strips) and to develop a confined concrete compressive stress-strain (fc – εc) model that accounts for partial wrapping. Three dimensional finite element (FE) models are generated to evaluate the influence of different parameters on the behavior of concentrically loaded RC circular columns …
-
Mechanical properties of rubberized concrete containing recycled concrete aggregate and polypropylene fiber
… Mechanical properties were assessed in terms of compressive, splitting tensile, and static flexural strength of concrete. The compressive stress-strain behaviour and flexural load-deflection behaviour of the concrete mixtures were also analyzed. Results show that a combination of RCA at 50% and …
-
Data-driven Modeling of Mechanical Behaviors of Additively Manufactured Materials
… proposed to predict the tensile, flexural, and compressive behaviors of additively manufactured plastics and composites. Ensemble learning was used to predict the tensile strength of polylactic acid (PLA) with cooperative AM process parameters. A 12.97% mean absolute percentage error (MAPE) was …
-
Analysis of prior strain history effect on mechanical properties and residual stresses in beams
… method for the determination of residual stresses in materials compared to the use of Xray and neutron diffraction methods. The vast majority of the work found for the application of the eeM in the literature concentrated on the determination of residual stresses in annealed beam …
-
A Gradient-based Constitutive Model to Predict Size Effects in the Response of Shape Memory Alloys
… a significantly increased hardening in their compressive stress-strain response as their diameter approached micron and submicron scales. This response cannot be modeled using conventional theories that lack an intrinsic length scale in their constitutive models. Constitutive models, however, …
Page 1 of 2