Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Computational fluid dynamics simulation"”.
-
Computational fluid dynamics simulation of precipitation processes
<p>First, an experimental and computational investigation of the effects of local fluid shear rate on the aggregation and breakage of ~10 mum latex spheres suspended in an aqueous solution undergoing laminar and turbulent Taylor-Couette flow was carried out, according to the following program. …
-
Computational fluid dynamics simulation of three-dimensional parallel jets
… formation is critically dependent on the aerodynamics of the impingement jet flow field. However, the real-word MB devices always have complicate internal structures such as mixing chambers and air channels between air tank and die tip, which may cause instability and cross flow in the jet …
-
Computational fluid dynamics simulation of fluidized bed polymerization reactors
<p>In this research, a CFD algorithm for simulation of fluidized bed polymerization reactors is described. In order to properly model the evolution of a polydisperse solid phase, population balance equation (PBE) must be solved along with other transport equations. A novel approach---DQMOM is …
-
Computational fluid dynamics simulation of a pulsed-jet mixer
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering and Materials Science, 2003
-
Advanced analysis of structured packing via computational fluid dynamics simulation
This research explored the use of CFD simulations to study single phase flows through structured packing. Flow rates were chosen to approximate those used in the vapor phase of industrial distillation columns. The results were evaluated against experimental results obtained with the same packing …
-
A computational fluid dynamics simulation model for flare analysis and control
… combustion systems. For this purpose, a computational fluid dynamics (CFD) simulation model is implemented to analyze the effects of variables such as ambient wind velocity, gas heating value, and steam injection on flare combustion efficiency. Some advanced chemistry and turbulence …
-
Computational Fluid Dynamics Simulation of In-Situ Plasma- Assisted Cold Spray
… heat treatment, with a significant lack of computational fluid dynamics (CFD) models existing for in-situ processing. This work aims to produce foundational CFD models of flow behaviors involving two-phase cold spray and in-situ non-transferred arc plasma. Initial metrics of investigation …
-
Computational Fluid Dynamics Simulation of Green Water Around a Two-dimensional Platform
… A level set function can present the individual fluids, and the interface between two-phase is represented by the zero level set. In addition, the level set evolution equation is coupled with the conservation equations for mass and momentum, which will be solved in the transformed plane. For …
-
COMPUTATIONAL FLUID DYNAMICS SIMULATION OF RAIN-WIND-INDUCED VIBRATION OF STAY CABLES
… excitation mechanism is still unclear. Recently, computational fluid dynamics (CFD) simulation has been widely applied in the research on structure vibrations due to dynamic wind loads, with great potential as an alternative tool for wind tunnel testing. It has also been adopted to investigate the …
-
Computational Fluid Dynamics Simulation of United Launch Alliance Delta IV Hydrogen Plume Mitigation Strategies
… proposed air injection solution is validated by computational fluid dynamics simulations that capture the combustion and compressible flow observed during the Delta IV launch sequence. A solution to the hydrogen plume problem will have direct influence on the efficiency of the launch vehicle: …
-
Computational Fluid Dynamics Simulation of Battery Thermal Management System at the Pack Level in Electric Vehicles
… developed and numerically solved using coupled fluid governing equations. Generate the mesh was done using Fluent Meshing. Subsequently, the model was imported into Fluent and the k-ε model was used to solve turbulence. Various parameters of the coolant such as temperature and inlet mass flow …
-
SLIDING MESH COMPUTATIONAL FLUID DYNAMICS SIMULATION OF A WIDE AND NARROW GAP INLINE ROTOR-STATOR MIXER
The FLUENT™ Computational Fluid Dynamics code was used to simulate the flow of water within an inline rotor-stator mixer. Two devices were simulated. Both had identical dimensions, except for the width of the shear gap: 4 mm for the 'wide gap' model and 0.5 mm for the 'standard gap' model. A …
-
Aerodynamic Analysis of Damage State Missiles using Overset Meshing Techniques for Application to Computational Fluid Dynamics Simulation
… performance modeling and flight controllability. Computational fluid dynamics (CFD) has expanded to include a wider range of aerodynamic applications with the increases in computing power. The goal of this research was to extend these developed CFD applications toward the damaged missile problem. …
-
Iterative learning control for load management in wind turbines with smart rotor blades
… it is used to modify the blade section aerodynamics such that the fluctuations in load due to periodic disturbances on the blades are minimized. At first, a computational fluid dynamics flow model with a basic structure iterative learning control law is used, where the controller’s gains are …
-
Modeling of wind load on tall buildings using computational fluid dynamics
… of wind loads on high-rise structures using computational fluid dynamics. Simulation of a turbulent boundary layer over tall building models was carried out at the Supercomputing and Visualization Unit, the National University of Singapore, using FLUENT 6.1.18. Turbulence was introduced at …
-
On-Track Testing as a Validation Method of Computational Fluid Dynamic Simulations of a Formula SAE Vehicle
This thesis is about the validation of a computational fluid dynamics simulation of a ground vehicle by means of a low-budget coast-down test. The vehicle is built to the standards of the 2014 Formula SAE rules. It is equipped with large wings in the front and rear of the car; the vertical loads on …
-
Multi-Processor Computation of Thrombus Growth and Embolization in a Model of Blood-Biomaterial Interaction Based on Fluid Dynamics
… and testing of a real-time three-dimensional computational fluid dynamics simulation of thrombosis and embolization to be used in the design of blood-contacting devices. Features of the model include the adhesion and aggregation of blood platelets on device material surfaces, shear and …
-
Melt spinning of continuous filaments by cold air attenuation
… under high-speed cold air drawing. Based on computational fluid dynamics simulation results, a parametric study was carried out under different process conditions which include processing temperature, air velocity and polymer volume flow rate. Effects of changes in processing variables on the …
-
SMALL-SCALE POWER EXTRACTION SYSTEM FOR COMPRESSED AIR ENERGY STORAGE
… current (DC) for storage in a super capacitor. Computational fluid dynamics simulation was used to explore entrainment scenarios and their effect on air flow into the turbine. With the obtained entrainment airflows, the internal energy of the expanded air was proven to rise before use by the …
Page 1 of 3