Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Computed Torque Control"”.
-
ENHANCEMENT OF COMPUTED-TORQUE CONTROL FOR ROBOT MANIPULATORS
Robust control and adaptive control are the two major trends in the trajectory following control problem of robot manipulators. The attractive features of the robust control approach are that on-line computation is kept to a minimum and it has an inherent robustness to bounded disturbances. The …
-
Computed torque control of a differentially driven automated guided vehicle
Investigates the suitability of a computed torque control scheme for the CONCIC II prototype AGV developed at Concordia University's Centre for Industrial Control.
-
Dynamic modelling and computed torque control of flexible-joint thrust vector control system
Thrust Vector Control (TVC) is one means of controlling air vehicles and spacecraft to follow a desired flight path. Of the currently available systems, the Flexible-Joint Thrust Vector Control (FJTVC) is currently the most feasible, especially for space applications. Reasons for this include its …
-
DESIGN AND CONTROL OF A 3 DEGREE OF FREEDOM ROBOT
… stability and performance of various position control laws for robot control. The experimental robot is designed to have a five bar parallelogram configuration with 3 degrees of freedom. Two motors, attached to the link1 and link2 respectively, provides two degrees of freedom. The third degree …
-
Neuro feedback linearisation in the control of robotic manipulators
… performance of a robotic system under different control techniques, in particular, the computed-torque control technique and the state feedback linearization. A neural network control approach based on the state feedback linearization technique is also proposed and studied.A two-link manipulator …
-
VISION BASED SERVO CONTROL OF A 3-DOF ROBOT
… the real-time performance of vision based servo control of a 3-degree of freedom robot is studied. Simulations and real-time experiments have been performed on the servo control system. The simulation and experimental results are analyzed and an insight into the control system obtained. A test …
-
Modeling, Control and Locomotion Planning of an Anguilliform Fish Robot
In this thesis, mathematical model, control law design, different locomotion patterns, and locomotion planning are presented for an Anguilliform robotic fish. Considering kinematic constraints, Lagrangian formulation is used to obtain the mathematical model of the robotic fish. Computed torque …
-
Line-of-sight-stabilization and tracking control for inertial platforms
… for high-precision applications, more involved control techniques are necessary to achieve better performance. In this work, kinematic and dynamic models for a three degrees-of-freedom ISP are presented. These models are based in the vehicle-manipulator system (VMS) framework for modeling of …
-
Motion Control of 3 Degree-Of-Freedom Direct-Drive Robot
Modern motion controllers of robot manipulators require knowledge of the system's dynamics in order to intelligently predict the torque command. The main objective for this thesis is to apply various motion controllers on a parallel direct drive robot in simulations and verify if one can take …
-
Rapid slewing of flexible space structures
… thus reducing the load on the spacecraft control system. The motion of a mass-spring-damper system is shown to be analogous to a spacecraft antenna slew with linear dynamics. This model is extended to a nonlinear double-gimbal mechanism with flexible joints, which better represents real …
-
Switching adaptive control of robot manipulators.
A switching adaptive-PD controller for the trajectory tracking problem of robotic manipulators subjected to large and abrupt changes of the system parameters is developed. The manipulator arm and the payload are considered, in the most general form, to have a highly nonlinear dynamical model with …
-
DESIGN AND DEVELOPMENT OF AN OPEN ARCHITECTURE ROBOTIC CONTROL SYSTEM
… open architecture platform - OpenRob for robot control system development, which provides a one-stop solution for model building controller design and numerical simulation for the ease of real-time implementation. Based on the description of theoretical background on three main functional …
-
Feasibility study of a moving hand support for surgery on the beating heart
… area in real-time and to generate a suitable control strategy. After comparing several sensors that could be used to measure the heart motion, a mechanical sensor was designed and built. Despite the measurement error present in this particular prototype, it is believed that the design features …
-
Design and Control of a Paediatric Robotic Lower-Limb Exoskeleton
… the virtual prototype, aids in designing the PD controller with gravity compensator for the unilateral exoskeleton and computed torque control (CTC) for the bilateral exoskeleton. The control regime is then applied to the virtual prototype to track a standard gait trajectory and manage the highly …
-
A Novel Stability Control System for Two-Wheeled Robotic Wheelchairs
… is inherently unstable and requires a stability control. Majority of stability controllers rely on the driving torques of the wheels which are high in magnitude and results in the increase of energy consumption. Various disturbances in the system also affect the performance of the controller. In …
-
Advanced Discrete-Time Control Methods for Industrial Applications
In this thesis, we focus on developing advanced control methods for two industrial systems in discrete-time with the aim of enhancing their performance in delivering the control objectives as well as considering the practical aspects of the designs such as the nature of the industrial process, …
-
Force Balancing Design and Trajectory Tracking Control of Real-Time Controllable Mechanisms
Real-time controllable (RTC) mechanisms refer to those mechanisms driven by RTC actuators or servomotors. There are many benefits to an R TC mechanism that is force balanced. A novel method called the Adjusting Kinematic Parameters method for force balancing of R TC mechanisms is more promising …
-
Experimental study of a two-DOF five bar closed-loop mechanism
… to examine and verify the effectiveness of the control algorithms and strategies developed at the Advanced Engineering Design Laboratory (AEDL). For this purpose, two objectives are set to be achieved in this research. The first objective is to develop a generic experiment environment (test bed) …
Page 1 of 2