Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM)"”.
-
Methodology for benefit analysis of CAD/CAM in USN shipyards.
This thesis expands the concept of Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) in naval shipbuilding to include maintenance. This inclusion is coupled with the integration of the design and manufacturing processes in the acronym CIDMM, which stands for Computer-Integrated Design, …
-
In vitro Investigation of Mechanical Properties of Latest-Generation CAD-CAM Composites
… aimed at addressing two critical issues in Computer-Aided Design/Computer-Aided Manufacturing (CAD-CAM) materials for dental prostheses: fractures and debonding from titanium implant abutment (Ti-base). Specifically, the work focused on evaluating the mechanical performance of latest …
-
Development of a fully digital workflow for fabricating custom nasoalveolar molding appliances
… commercially available intraoral scanning (IOS), computer-aided design/computer-aided manufacturing (CAD/CAM), and 3D printing tools. Methods: Digital dental models of three infants with cleft lip and palate were obtained using a direct intraoral scanner and compared to digital models derived from …
-
Three-dimensional Holographic Lithography and Manipulation Using a Spatial Light Modulator
… light modulator (SLM) to display specially designed phase holograms. The use of holograms with the SLM provides a novel approach to photolithography that offers the unique ability to operate in both serial and single-shot modes. In addition to the lithographic applications, the optical …
-
Edge-Chipping and Translucency Comparison Among Lithium Silicate-Based Ceramics
… glass-ceramic materials, IPS e.max CAD and GC Initial LiSi blocks, and two zirconia-lithium silicate glass-ceramic materials, Vita Suprinity and Celtra Duo, were prepared and tested (n=20 specimens/group). Specimens (14 x 12 x 1.5 mm) were sectioned from commercially available …
-
The Design Of A Nanolithographic Process
This research delineates the design of a nanolithographic process for nanometer scale surface patterning. The process involves the combination of serial atomic force microscope (AFM) based nanolithography with the parallel patterning capabilities of soft lithography. The union of these two …
-
Untersuchungen zu Behandlungserfolgen und Behandlungszeiten mit dem Konzept „Virtual Surgery First“ bei kombinierten kieferorthopädisch/kieferchirurgischen Therapien
… planen und die notwendigen OP-Splinte in einem Computer-aided design/computer-aided manufacturing-(CAD/CAM)-Verfahren herstellen (VSF-Virtual Surgery First). Im Vorfeld dieser Arbeit wurde von 24 Patienten mit Hilfe eines Dentalen Volumentomografie-(DVT)-Scans eine virtuelle Planung nach VSF mit …
-
Marginal fit and internal adaptation of monolithic zirconia 3-unit fixed dental prostheses : in-vitro study
… fabricated using two workflows: a full-chairside computer aided design/computer aided manufacturing (CAD/CAM) one (FCH) and a lab CAD/CAM one (LAB). Methods: Teeth #14 and #16 were prepared for MZ 3-unit FDP on an ivorine typodont. A total of 30 MZ 3-unit FDPs was fabricated using two processes: …
-
Accuracy of Implant Placement Comparing a Tissue Level Static Guide vs. Dynamic Navigation Using the X-Mark Protocol on Edentulous Mandibles: A Laboratory Study
Introduction: With the use of computer-aided design/computer-aided manufacturing (CAD/CAM), along with cone beam computed tomography (CBCT), clinicians can have a static surgical guide fabricated to aid in the placement of implants. Dynamic navigation forgoes the step of fabricating a static …
-
In-vitro Evaluation of Accuracy of Conventional and CAD/CAM Removable Partial Denture Frameworks
Purpose: Computer-aided design/computer-aided manufacturing (CAD/CAM) technology is gaining popularity in dentistry, and more recently, to fabricate removable partial dentures (RPD). The purpose of this study was 1) to evaluate the overall accuracy and fit of conventional versus CAD/CAM fabricated …
-
Edge Chipping Resistance and Flexural Strength of Polymer Infiltrated Ceramic Network and Resin Nano Ceramic Materials
… nano ceramic (RNC) restorative materials for Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) applications recently became commercially available. Little independent evidence regarding their mechanical properties exists to facilitate material selection process. The purpose of this …
-
Tecnologia digital em próteses totais: propriedades dos materiais CAD-CAM e desenvolvimento de uma patente de inovação para simplificação do fluxo de trabalho
Digital features like subtractive and additive manufacturing can promote breakthroughs by reducing the time and cost of making complete dentures (CDs). Thus, this study aims to investigate surface characteristics (roughness and contact angle), mechanical properties (mini-flexural strength), and …
-
In-vitro Comparison of Retention Among Contemporary and Conventional Post-and- Cores
Purpose: Computer-aided design/computer-aided manufacturing (CAD/CAM) technology is gaining popularity in dentistry, and more recently, used to fabricate custom post-andcores (PC) for endodontically treated teeth. The purpose of this study was 1) to evaluate the overall retention of conventional …
-
Marginal Adaptation of CAD/CAM Hybrid Ceramic Crowns Made on Preparations With and Without Surface Finishing
… Studies on previous generations of chair-side Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) systems concluded that preparation quality has an impact on marginal fit of milled restorations. However, as chair-side CAD/CAM technology improves, and newer systems and materials are …
-
Precision of Temporary Anchorage Device Placement with 2D vs. 3D Diagnostic Tools and Surgical Guides
… to assure the proper fit and the stability of computer-aided design/computer-aided manufacturing (CAD/CAM) surgical drill guides.
-
Marginal Adaptation & Internal Fit of Digitally Designed Lithium Disilicate Crowns Manufactured by CAD/CAM and the Conventional Heat-Press Technique
… compare marginal fit & internal fit of digitally designed lithium disilicate crowns manufactured by the computer-aided design/computer-aided manufacturing (CAD/CAM) technique and the conventional lost-wax heat-pressed technique. The method used for analyzing the crowns was based on 3D metrology …
-
Adhesive luting of buccal tubes to silica-based ceramic crowns
… einer Molarenkrone des Zahnes 36 durch ein computer-aided design/computer-aided manufacturing (CAD/CAM)-Verfahren hergestellt. Die Fläche zur Aufnahme des Bukkalröhrchens wurde entsprechend der Randomisierungsliste konditioniert: In Gruppe 1 bestand der Konditionierungsvorgang aus Anrauen …
-
Transfer accuracy of 3D printed trays for indirect bonding of custom 3D printed orthodontic brackets
Objectives: To evaluate the transfer accuracy of custom orthodontic brackets using 3D printed transfer trays in a fully digital workflow. Methods and Materials: Twenty-one participants who were treated with LightForce (LightForce, Burlington, MA, USA) brackets were bonded using 3D printed transfer …
-
Η επίδραση της όπτησης οδοντιατρικής πορσελάνης και της συγκλεισιακής φόρτισης στην αυχενική και εσωτερική εφαρμογή των κατασκευασμένων με τη χρήση της τεχνολογίας CAD/CAM σκελετών Co-Cr επιεμφυτευματικών συγκολλούμενων μεταλλοκεραμικών στεφανών
… specimens were fabricated with each of the four manufacturing methods and divided into two subgroups (n=3): one subgroup with the specimens as fabricated (C1, HM1, SM1, SLM1) and the other subgroup (C2, HM2, SM2, SLM2) with specimens subjected to thermal cycles simulating porcelain firings. The …