Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 70 for “"Concrete model"”.
-
Split Concrete Model for Shear Behavior of Concrete Beams
Split Concrete Model (SCM) is a unified approach towards modeling shear behavior in concrete. SCM is essentially a rational model which is evaluated and modified using a large experimental database.The shear strength of the concrete beam is modeled as the sum of the contribution of concrete, …
-
Response of Ten Story, Reinforced Concrete Model Frames to Simulated Earthquakes
Made available in DSpace on 2014-12-13T19:31:54Z (GMT). No. of bitstreams: 1 8004149.pdf: 11776108 bytes, checksum: 77242716ff08742670eea10097c9c0af (MD5) Previous issue date: 1979
-
Response of ten story, reinforced concrete model frames to simulated earthquakes
… elastic and inelastic response of reinforced concrete structures subjected to strong earthquake excitations. This was a part of continuing research supported by National Science Foundation, Grant ENV 7422962. In the experimental phase, test structures made up of ten-story, three-bay frame …
-
Impact Investigation Using Ansys Autodyn Code on a Reinforced Concrete Model Due To TNT Shaped Charge for Nuclear Security Vulnerability Assessments
… the damage that could be created on a reinforced concrete wall due to the impact of Tri-Nitro Toluene (TNT) shaped charge using a numerical simulation software. There are many commercial numerical simulation software that can be used to solve engineering problems in real world scenarios, such as …
-
Numerical Modeling of Lime-Cement Columns Using PLAXIS 2D and 3D
This thesis investigated numerical modeling of lime–cement column (LCC) rein forced embankments using PLAXIS 2D and PLAXIS 3D. For 2D, the Volume Aver aging Technique (VAT) which is a homogenization method was used, in which the soil was modeled using S-CLAY1S and the columns using the MNHard …
-
Numerical modeling of air blast effects on hybrid structures
… adding composite reinforcement to existing concrete structures to decrease blast damage. An upgraded material model for concrete is presented. This model, used in LS-DYNA3D, incorporates tensile damage, which allows the concrete to degrade as it is loaded. The concrete model is tested using …
-
Three-dimensional non-linear finite element analysis of reinforced concrete beams in torsion. Reinforced concrete members under torsion and bending are analysed up to failure. A non-linear concrete model for general states of stress including compressive strength degradation due to cracking is described.
This thesis describes a non-linear finite element model suitable for the analysis of reinforced concrete, or steel, structures under general three-dimensional states of loading. The 20 noded isoparametric brick element has been used to model the concrete and reinforcing bars are idealised as axial …
-
Simulation of High-velocity Penetration for Rigid Projectile into Plain Concrete Target using Discrete Element Method
… Element Method (DEM) simulation of plain concrete target's behavior under high-velocity penetration of rigid projectile. In this thesis, different types of research works including empirical, analytical and numerical methods in penetration by the previous scholars were carefully reviewed. …
-
Finite element analysis and experimental comparison of doubly reinforced concrete slabs subjected to blast loads
In the design of concrete structures, it has become important to understand the response of concrete as a structural material when subjected to large stresses and strain rates through explosive loadings. In order to do that, any researcher has to study the dynamic nonlinear responses of individual …
-
A multiaxial constitutive model for concrete in the fire situation including transient creep and cooling down phases
… to develop an efficient and reliable multiaxial concrete model for implementation in finite elements softwares dedicated to the analysis of structures in fire. The need for proper concrete model remains a very challenging task in structural (fire) engineering because of the complexity of the …
-
Punching shear capacity of flat slab-column junctions (a study by 3-D non-linear finite element analysis)
… The non-linear 3-D elastic isotropic model proposed by Motsovos was used to describe the behaviour of concrete before cracking or crushing. After cracking, a yield criteria for 2-D model similar to Kupfer-Hilsdorf was used and concrete was assumed to be anisotropic. No softening in …
-
A Comparison of 1D Beam-element and 3D Solid-element based Modelling Approaches based on a Developed Tool for the Nonlinear Analysis of Reinforced Concrete Structural Components
Nonlinear material models are needed for the capacity analysis of structural components. Often, 1D-beam element-based models are preferred over more sophisticated solid element-based modeling approaches due to their efficiency. However, their reliance on uniaxial material representations often …
-
Comportamento não-linear de estruturas de concreto armado com aplicação a análise de vasos de pressão de usinas nucleares
The formulation and numerical implementation of a concrete model that has been incorporated in the computer program LORANE-NL has been presented. The material model is a hypoelastic model based on a nonlinear uniaxial stress-strain relation that is generalized to take account biaxial and triaxial …
-
Finite element analysis and experimental validation of reinforced concrete single-mat slabs subjected to blast loads
… research is to study the response of reinforced concrete slabs subjected to blast loading as they can be used as protective structures around the main structure. An experimental investigation has been performed in a separate study involving blast-testing of 12 reinforced concrete slabs in a shock …
-
Nonlinear analysis of T-shaped concrete walls subjected to multi-directional displacements
… tested and analyzed five cast-in-place concrete structural walls, three rectangular walls and two T-walls. All of the walls were analyzed using the open source finite element package OpenSees. Both pre- and post-test analysis of the walls was done to understand the simulation …
-
Flexural Behavior of Reinforced and Prestressed Concrete Beams Using Finite Element Analysis
… have been utilized to study the response of concrete structural components. Experimental based testing has been widely used as a means to analyze individual elements and the effects of concrete strength under loading. The use of finite element analysis to study these components has also been …
-
DESIGNING LOCAL BEHAVIOR TO ACHIEVE GLOBAL OBJECTIVES: AN APPLICATION ON ACOUSTIC SENSOR NETWORK
… with only local information. We present a concrete model a specific application, in which we define appropriate local behavior to achieve global objectives. Then, for an important class of utility functions, we present a decentralized algorithm which attempt to maximize the utility derived …
-
Dynamic abstraction model checking
<p>Model checking has attracted considerable attention since this technique is an automatic technique for verifying finite state concurrent systems. It is a formal method to verify if a software system or hardware system meets its properties. Nowadays, model checkers have become indispensable tools …
-
Analýza faktorů ovlivňujících průběh vnitřních sil v primárním tunelovém ostění a jeho návrh
… neogenních jílů za použití matematického modelování. V současné době je tunelové ostění ze stříkaného betonu v praxi často modelováno pomocí deskostěnových prvků (nosníků) s lineárně elastickým materiálovým modelem. Pro horninové prostředí, v kterém ražba probíhá, je běžně používán …
Page 1 of 4