Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Condensed Water"”.

  1. Methodology for Volumetric Estimation of Condensed Water Vapor Plumes from Remotely Sensed Imagery

    … three-dimensional geometric reconstructions of condensed water vapor plumes, this research presents a robust methodology utilizing the space carving technique. Paired with an extensive data collection campaign, convolutional neural networks such as U-Net and Mask R-CNN are assessed and utilized …

    rit Repository record for Methodology for Volumetric Estimation of Condensed Water Vapor Plumes from Remotely Sensed Imagery (opens in a new tab)

  2. Measurement of adhesion force due to condensed water vapor in a crossed-fiber system.

    … or decreasing. Our work shows that atmospheric water vapor greatly influences the adhesion force, both by condensing to form a liquid meniscus in the contact region between the particles, and by being adsorbed onto the quartz surfaces. Our adhesion force measurements are compared to predictions …

    arizona-thes Repository record for Measurement of adhesion force due to condensed water vapor in a crossed-fiber system. (opens in a new tab)

  3. Studies of Interaction of Small Molecules with Water Condensed Media

    STUDIES OF INTERACTION OF SMALL MOLECULES WITH WATER CONDENSED MEDIA<br /><br /> The present work reports experimental and theoretical studies of the intermolecular interactions in condensed water media. The chemical objects comprise pristine ice and polar organic substances: acetone, acetaldehyde, …

    waterloo Repository record for Studies of Interaction of Small Molecules with Water Condensed Media (opens in a new tab)

  4. Molecular Dynamics Simulation for Nanoparticle-Surface Collision

    … energy systems,environmental technologies, and water treatment. Meanwhile, these nanoparticles maybecome airborne, inhalable and cause air pollution. Therefore, removal of the dispersednanoparticles from ambient air is essential to protect the public health. The collision ofthese nanoparticles …

    waterloo Repository record for Molecular Dynamics Simulation for Nanoparticle-Surface Collision (opens in a new tab)

  5. Effect of flow on the corrosion behaviour of API 5L X80 steel in supercritical CO2 systems

    In this work,the effect of water-saturated supercritical CO2 and CO2-saturated water flow rate on the corrosion behaviour of API 5L X80 steel at a temperature of 35°C and pressure of 80 bar was investigated. Tests were carried out with the samples attached to a rotating shaft inside an autoclave. …

    brazil-uerj Repository record for Effect of flow on the corrosion behaviour of API 5L X80 steel in supercritical CO2 systems (opens in a new tab)

  6. Heat transfer through a condensate droplet on hydrophobic and nanostructured superhydrophobic surfaces

    … is crucial to a wide range of energy and water applications. In this thesis, we reconcile classical droplet growth modeling barriers by utilizing two-dimensional axisymmetric numerical simulations to study individual droplet heat transfer on non-wetting surfaces (90° < θ_a < 170°). …

    uiuc Repository record for Heat transfer through a condensate droplet on hydrophobic and nanostructured superhydrophobic surfaces (opens in a new tab)

  7. Investigation of the Effect of Superhydrophobic Coatings on the Performance of Heat Exchangers

    … showed they retained significant amounts of condensed water when they were used to cool air to below the dew point. This condensed water affected both the stability of the coatings and the resistance to air flow through the heat exchangers. An alternative approach to preparing …

    qu-belfast Repository record for Investigation of the Effect of Superhydrophobic Coatings on the Performance of Heat Exchangers (opens in a new tab) Download PDF for Investigation of the Effect of Superhydrophobic Coatings on the Performance of Heat Exchangers (opens in a new tab)

  8. Pore scale study of gas sorption and transport in shale nanopore systems

    … applications of our developed model, we studied water adsorption and condensation in a reconstructed clay pore structure based on SEM image analysis, and explored the effect of surface wettability on adsorbed/condensed water distribution and connectivity. Supercritical methane flow simulations …

    texas Repository record for Pore scale study of gas sorption and transport in shale nanopore systems (opens in a new tab)

  9. The Study of the Effects of Different Metallic Soaps on the Water Content of Water-in-Gasoline Emulsions

    … his lubricating oil, or to remove oil from his condensed water, is dependent on the physical chemistry of emulsions for the methods which he employs. The object of this research on the emulsification of water in gasoline was to study the effect of various metallic soaps on the amount of water …

    marquette Repository record for The Study of the Effects of Different Metallic Soaps on the Water Content of Water-in-Gasoline Emulsions (opens in a new tab)

  10. Dräneringslösning till HVAC-modul för fordon

    … types of vehicles. The solution should lead the condensed water from the HVAC outlet through the chassis. A tube should then be mounted on bottom of the product to further on lead the water away from the car. This conn The delivery of this solution also includes manufacturing aspects and cost …

    chalmers Repository record for Dräneringslösning till HVAC-modul för fordon (opens in a new tab)

  11. Air-side condensate management: Drainage channels in heat exchangers

    … conditions, promoting the drainage of condensed water is critical. Drainage channels on tube walls might provide a robust solution to promote condensate drainage from compact heat exchangers. A quantitative and qualitative evaluation of the effectiveness of drainage channels on the …

    uiuc Repository record for Air-side condensate management: Drainage channels in heat exchangers (opens in a new tab)

  12. Nanocrystal stabilization, synthesis and assembly using supercritical fluids

    … films. The porous structures were templated by condensed water droplets as a result of solvent evaporation. Prevention of droplet coalescence by interfacially active nanocrystals, which adsorbed onto the surface of the droplets, led to the formation of highly ordered pore structures.

    texas Repository record for Nanocrystal stabilization, synthesis and assembly using supercritical fluids (opens in a new tab)

  13. A Test of the Power Plant of the Knoxville City Mills

    … of two 350-H. P. Heine boilers, an open feed-water heater (not used in test), an ejector condenser, and auxilaries as follows: One pump used to lift water from creek to top of condenser, one pump to put water into the heater from the hot well, two pumps to put water into the boiler from the …

    ut-knoxville Repository record for A Test of the Power Plant of the Knoxville City Mills (opens in a new tab)

  14. Solvent Diffusion in a Solvent/Water/Bitumen System

    … of solvent into the bitumen when a layer of condensed water is present. The diffusion experiments were performed in 2.2 cm diameter glass vials. Water layers with thicknesses from 0.25 to 2 cm were placed over bitumen and excess solvent was placed over the water. The diffusion rate of the …

    calgary Repository record for Solvent Diffusion in a Solvent/Water/Bitumen System (opens in a new tab)

  15. Density and Viscosity of Light and Heavy Phases from Mixtures of Bitumen and Solvent

    … thermal techniques that can reduce their water and energy requirements. In these processes, condensed water and a mixture of bitumen and solvent drain to the producer well. The mixture of bitumen and solvent can separate into a bitumenrich (heavy) liquid phase and a solvent-rich (light) …

    calgary Repository record for Density and Viscosity of Light and Heavy Phases from Mixtures of Bitumen and Solvent (opens in a new tab)

  16. Study of Ordered Macroporous Polymer Films by Templating Breath Figures

    … range of sub-micron to several microns, where condensed water droplets (breath figures) work as templates. Compared with other templating methods, this one is fast and simple. Well-ordered porous films can be obtained in tens of seconds and the pore size can be easily tailored and dynamically …

    gatech Repository record for Study of Ordered Macroporous Polymer Films by Templating Breath Figures (opens in a new tab)

  17. Characterization and aging studies of selective solar C/Al203/Al absorber surfaces

    … thermal collectors are mainly used for domestic water and space heating. They capture incident solar radiation, convert it to usable thermal energy, and transfer the energy into a heat transfer fluid. All of this should be accomplished economically with minimal energy loss. One of the most …

    aalto Repository record for Characterization and aging studies of selective solar C/Al203/Al absorber surfaces (opens in a new tab)

  18. Guiding Development of Fuel Cell Catalysts with Statistically Robust Transmission Electron Microscopy

    … activity, while allowing proton access through condensed water. By comparing images and composition maps before and after electrochemical stability tests, we find that porous carbon supports suppress Pt particle coalescence, accounting for improved overall durability.

    cornell Repository record for Guiding Development of Fuel Cell Catalysts with Statistically Robust Transmission Electron Microscopy (opens in a new tab)

  19. Design av försöksanläggning för trycksatt rökgasrening vid oxy-fuelförbränning

    … of reactions following from the contact of condensed water and sulphur- and nitrogen-oxides which are also present in the flue gas. This report compiles and evaluates the basis of a scientific unit with the purpose of exploring the possibilities of extracting impurities of SOx and NOx from …

    chalmers Repository record for Design av försöksanläggning för trycksatt rökgasrening vid oxy-fuelförbränning (opens in a new tab)

  20. Development of a microfluidic device for patterning multiple species by scanning probe lithography

    … of the substrate to below the dew point, water droplets are condensed in the microwell array. Microbeads of a hygroscopic material (e.g., poly-ethylene glycol) are dispensed into the microwells to prevent evaporation of the condensed water. Furthermore, since poly-ethylene glycol (PEG) is …

    tamu Repository record for Development of a microfluidic device for patterning multiple species by scanning probe lithography (opens in a new tab)

Page 1 of 2