Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Condenser design"”.

  1. Marine steam condenser design optimization

    A surface -condenser analysis coda was coupled with a constrained function minimization code to produce an automated marine condenser design and optimization package. The program, CGNDIP, was based on the principles developed in 0RC0N1, a sophisticated computer coda produced by the Oak Ridge …

    nps Repository record for Marine steam condenser design optimization (opens in a new tab)

  2. Enhanced Finned-Tube Condenser Design and Optimization

    Enhanced Finned-Tube Condenser Design and Optimization Susan W. Stewart 173 pages Directed by Dr. Sam V. Shelton Finned-tube heat exchangers are widely used in space conditioning systems, as well as any other application requiring heat exchange between liquids and gases. Their most widespread use …

    gatech Repository record for Enhanced Finned-Tube Condenser Design and Optimization (opens in a new tab)

  3. Marine steam condenser design using numerical optimization

    … minimization code to produce automated marine condenser design and optimization programs of vastly different complexity. The first program, OPCODE1, was developed from the Heat Exchange Institute's Standards for Steam Surface Condensers (HEI). The second program, OPCODE2, was developed from the …

    nps Repository record for Marine steam condenser design using numerical optimization (opens in a new tab)

  4. Condenser Design as a Component of Methane Purification Technologies for In-Situ Propellant Manufacture on Mars

    … a thermodynamic-based model was developed to design the condenser tubes, enabling the estimation of system requirements and exploration of how variation of the design parameters influences tube length, cost, and overall feasibility. The model employs finite volume techniques to incrementally …

    ku Repository record for Condenser Design as a Component of Methane Purification Technologies for In-Situ Propellant Manufacture on Mars (opens in a new tab)

  5. Feasibility of the application of the CarbFix method to geothermal power plants globally

    … dioxide emissions from the power plants, and the condenser design for the power plant. To determine potentially feasible locations, the CarbFix Mineral Storage Atlas was used. Carbon dioxide emissions data for geothermal power plants were very limited, and there was limited availability of …

    reykjavik Repository record for Feasibility of the application of the CarbFix method to geothermal power plants globally (opens in a new tab)

  6. Technoeconomic Analysis of Textured Surfaces for Improved Condenser Performance in Thermoelectric Power Plants

    … using an electrodeposition process for condenser tubes in thermoelectric power plants. The textured surfaces are expected to provide enhanced performance by deterring fouling and promoting dropwise condensation of the steam on the shell side. Using a thermal resistance network of a shell …

    vt Repository record for Technoeconomic Analysis of Textured Surfaces for Improved Condenser Performance in Thermoelectric Power Plants (opens in a new tab)

  7. A feasibility study of heat transfer improvement in marine stream condensers.

    A survey of condenser design principles and heat transfer augmentation schemes is provided. Using the ORCON 1 computer code, as developed by Oak Ridge National Laboratory, a thermal analysis was performed on the main condenser of the USS John F. Kennedy, CVA-67. A comparison was made between the …

    nps Repository record for A feasibility study of heat transfer improvement in marine stream condensers. (opens in a new tab)

  8. Air-cooled condensers for thermoelectric power generation

    … many thermoelectric power plants use wet-cooled condenser technology, which tends to lose water to evaporation or thermally pollute the water such that it is unfit to return to its source. An alternate method for the steam condensation process is to use dry-cooled technologies where air is the …

    gatech Repository record for Air-cooled condensers for thermoelectric power generation (opens in a new tab)

  9. Coupled heat and mass transfer during condensation of high-temperature-glide zeotropic mixtures in small diameter channels

    … the pure ammonia work, an improved zeotropic condenser design method for high-temperature-glide mixtures in small diameter channels, based on the non-equilibrium film theory, was introduced. The key features of the improved model were the consideration of annular and non-annular flow effects …

    gatech Repository record for Coupled heat and mass transfer during condensation of high-temperature-glide zeotropic mixtures in small diameter channels (opens in a new tab)

  10. Review of H2S abatement in geothermal plants and laboratory scale design of tray plate distillation tower

    … sulfide in the geothermal brine and the condenser design. By using the criteria described in the work, some processes, or combination of processes are proposed. All of the methods suggested are considered effective, achieving over 90% removal of H2S entering the geothermal field. The …

    reykjavik Repository record for Review of H2S abatement in geothermal plants and laboratory scale design of tray plate distillation tower (opens in a new tab)

  11. A study of thermodynamic characteristics and predictive computer modelling of an air to water heat pump system

    … has been made in the laboratory on a specially designed and instrumented air to water heat pump system. The design, using refrigerant R12, was based on the requirement to produce domestic hot water at a temperature of about 50 °C and was assembled in the laboratory. All the experimental data …

    aston Download PDF for A study of thermodynamic characteristics and predictive computer modelling of an air to water heat pump system (opens in a new tab)

  12. Organic Fluids and Passive Cooling in a Supercritical Rankine Cycle for Power Generation from Low Grade Heat Sources

    … Use of passive cooling systems coupled with the condenser was studied, so that lower sink temperatures could be obtained. Underground tunnels, buried at a depth of few meters, were used as earth-air-heat-exchanger (EAHE) through which hot ambient air was passed. It was observed that the air …

    usf Repository record for Organic Fluids and Passive Cooling in a Supercritical Rankine Cycle for Power Generation from Low Grade Heat Sources (opens in a new tab)

  13. Measurement of Finned-Tube Heat Exchanger Performance

    … electrical costs and environmental impact. The design of finned-tube heat exchangers requires the selection of over a dozen design parameters by the designer. The refrigerant side flow and heat transfer characteristics inside the tubes have been thoroughly studied. However, the air side flow …

    gatech Repository record for Measurement of Finned-Tube Heat Exchanger Performance (opens in a new tab)

  14. Acoustically Enhanced Condensation in Horizontal Tubes

    … in the condensate. In this study, a tube-in-tube condenser test section is coupled to an acoustic actuator at the inlet and a Helmholtz volume at the outlet. A flow visualization study is performed to characterize the flow regimes, oscillations in the fluid motion that modify the regimes, and void …

    gatech Repository record for Acoustically Enhanced Condensation in Horizontal Tubes (opens in a new tab)

  15. Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

    … of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country …

    brazil-ufrn Repository record for Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo (opens in a new tab)

  16. Investigation of air-cooled condensers for waste heat driven absorption heat pumps

    … and mass exchangers. Indirect coupling of the condenser in an absorption system to the ambient through an intermediate fluid loop requires additional electrical input for pumping and lowers the overall coefficient of performance (COP) of the system. This study considers the development of …

    gatech Repository record for Investigation of air-cooled condensers for waste heat driven absorption heat pumps (opens in a new tab)

  17. Design of Air-cooled Microchannel Condensers for Mal-distributed Air Flow Conditions

    Air-cooled condensers are routinely designed for a variety of applications, including residential air-conditioning systems. Recent attempts at improving the performance of these heat exchangers have included the consideration of microchannel tube, multilouver fin heat exchangers instead of the more …

    gatech Repository record for Design of Air-cooled Microchannel Condensers for Mal-distributed Air Flow Conditions (opens in a new tab)

  18. Development of Graphene Oxide Membranes for Pervaporative Desalination

    … including membrane module, fluid flow dynamics, condenser design, vacuum level, and permeate collection. We compared the performance of the system with a commercial membrane and a commercial PV module, and observed a 5% difference, which we deemed acceptable. Our data indicated that properties of …

    waterloo Repository record for Development of Graphene Oxide Membranes for Pervaporative Desalination (opens in a new tab)

  19. Steam condensation in flattened-tube air-cooled condensers

    Air-cooled condensers for power plants are an alternative to closed-cycle wet cooling with a condenser and cooling tower pair. Air-cooled condensers cool the process steam by forced-convection of air, replacing the water evaporation found in traditional power-plant designs. Air-cooled condensers …

    uiuc Repository record for Steam condensation in flattened-tube air-cooled condensers (opens in a new tab)

Page 1 of 2