Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Condition Based Monitoring"”.

  1. Condition-based monitoring system for diagnostics and prognostics of centrifugal pumps

    … cycle. This work presents a systematic robust conditionbased monitoring process for diagnostics and prognostics of centrifugal pumps. The process includes industrial design of experiments; data acquisition software and hardware; transient modeling using transfer functions, artificial …

    missouri Repository record for Condition-based monitoring system for diagnostics and prognostics of centrifugal pumps (opens in a new tab)

  2. Condition based monitoring of gearbox transmission elements in a spur gear cutter bar.

    … was to develop and test a real time monitoring system to monitor the health of the bearings during operation and alert the operator of the location of a pending bearing failure. This system uses temperature as the monitoring parameter and does not estimate the remaining useful life …

    umn Repository record for Condition based monitoring of gearbox transmission elements in a spur gear cutter bar. (opens in a new tab)

  3. Development of a Condition Based Monitoring System for CNC Machine Tool Linear Axis

    … Therefore, it is crucial to monitor the health condition of this subsystem and its components. The principal aim of the presented research was to develop a condition-based monitoring (CBM) system to monitor the health condition of the linear axis and its various components. To achieve this aim, …

    mcmaster Repository record for Development of a Condition Based Monitoring System for CNC Machine Tool Linear Axis (opens in a new tab)

  4. HEALTH CONDITION MONITORING OF RECIPROCATING AND SCREW COMPRESSORS

    In this thesis, we aim to develop a condition-based monitoring methodology to perform fault detection in reciprocating and screw compressors based on discharge temperature deviation, which is a parameter obtained by comparing actual discharge temperature and expected discharge temperature. The …

    nus Repository record for HEALTH CONDITION MONITORING OF RECIPROCATING AND SCREW COMPRESSORS (opens in a new tab) Download file for HEALTH CONDITION MONITORING OF RECIPROCATING AND SCREW COMPRESSORS (opens in a new tab)

  5. LOW-COST 5G WIRELESS ACCELEROMETER FOR CONDITION MONITORING

    … has resulted in a long history of research into condition-based monitoring (CBM). While high-performance CBM systems exist in academic research settings, industrial implementation is usually limited to highly critical assets, due to high initial investment costs and network limitations. Even when …

    mcmaster Repository record for LOW-COST 5G WIRELESS ACCELEROMETER FOR CONDITION MONITORING (opens in a new tab)

  6. Piezoelectric Sensor in the Application of Rolling Bearing Health Monitoring

    A condition-based monitoring concept for rolling element bearings in machinery utilizing a piezoelectric load sensor is investigated in this thesis. The radially polarized cylindrical piezoelectric sensor is modeled in its specific coordinates. The sensor registers the stress occurring in all …

    odu Repository record for Piezoelectric Sensor in the Application of Rolling Bearing Health Monitoring (opens in a new tab)

  7. Classification Of Rotating Machinery Fault Using Vibration Signal

    … carry out effective maintenance actions. Since condition-based monitoring method recommends maintenance only when necessary, this approach can avoid unnecessary plan maintenance costs. Condition-based approach, along with the different faults detecting and correcting approach can become handy …

    nodak Repository record for Classification Of Rotating Machinery Fault Using Vibration Signal (opens in a new tab)

  8. A Physics Based Digital Twin Framework for Motor Operated Valves

    … on the MOV's availability using residual-based techniques and dynamically depict its state. To more accurately determine the current operating state, simulation strokes produced by this numerical solver are utilized for parameter estimation. The presented model serves as a precursor for …

    guelph Repository record for A Physics Based Digital Twin Framework for Motor Operated Valves (opens in a new tab)

  9. Probabilistic Methods for Estimating Vehicle Capability in Damaged Composite Aircraft

    … ideas like the develop-ment of digital twin, condition based maintenance, where expensive models are calibrated to individual aircraft for the purposes of inferring component damage and predicting the remaining lifespan of that aircraft. However, high performance computing is the back-bone of …

    tamu Repository record for Probabilistic Methods for Estimating Vehicle Capability in Damaged Composite Aircraft (opens in a new tab)

  10. A multi-layer neural network approach to identification of mechanical damage in power transformer windings

    … brought a change from scheduled maintenance to condition based monitoring (CBM), where the state of the transformer is continuously monitored to evaluate its working condition. A key method of transformer CBM, which effectively detects mechanical damage to the structure of the transformer …

    ubc Repository record for A multi-layer neural network approach to identification of mechanical damage in power transformer windings (opens in a new tab) Download PDF for A multi-layer neural network approach to identification of mechanical damage in power transformer windings (opens in a new tab)

  11. Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems

    Condition based monitoring of Thermal Protection Systems (TPS) is necessary for safe operations of space shuttles. In the current research Terahertz radiation (T-ray) has been used to detect mechanical and heat induced damages in TPS tiles. Voids and cracks inside the foam tile are denoted as …

    arizona-thes Repository record for Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems (opens in a new tab)

  12. Improvement of belt tension monitoring in a belt-driven automated material handling system

    … thesis was the improvement of estimation and monitoring procedures for condition monitoring of belt tension and misalignment in belt-driven automated material handling systems widely used in modern semiconductor manufacturing systems. In pursuit of this goal, two 3-factor, 3-level experiments …

    texas Repository record for Improvement of belt tension monitoring in a belt-driven automated material handling system (opens in a new tab)

  13. Integrating Disparate Nuclear Data Sources for Improved Predictive Maintenance Modeling: Maintenance-Based Prognostics for Long-Term Equipment Operation

    … percent of their entire maintenance resources to condition based monitoring and the planned work that is required as a result of the findings” [1]. One would expect US nuclear power plants to constantly upgrade, improve, and expand their operations and maintenance departments and tactics. Since …

    utk-theses Repository record for Integrating Disparate Nuclear Data Sources for Improved Predictive Maintenance Modeling: Maintenance-Based Prognostics for Long-Term Equipment Operation (opens in a new tab)

  14. THERMODYNAMIC AND INFORMATION ENTROPY-BASED PREDICTION AND DETECTION OF FATIGUE FAILURES IN METALLIC AND COMPOSITE MATERIALS USING ACOUSTIC EMISSION AND DIGITAL IMAGE CORRELATION

    … to failure as they are tested under identical conditions. In engineering structures and some components, fatigue is among the most common degradation mechanisms and has been under extensive study over the past century. A common characteristic of the fatigue life models is to rely on some …

    maryland Repository record for THERMODYNAMIC AND INFORMATION ENTROPY-BASED PREDICTION AND DETECTION OF FATIGUE FAILURES IN METALLIC AND COMPOSITE MATERIALS USING ACOUSTIC EMISSION AND DIGITAL IMAGE CORRELATION (opens in a new tab)

  15. Monitoring Additive Manufacturing Machine Health

    … However, it can be difficult to determine the condition, or health, of an AM machine since complex designs can increase the variability of part quality. With fewer parts produced, destructive testing is less desirable and statistical methods of tracking part quality may be less informative. …

    utk-theses Repository record for Monitoring Additive Manufacturing Machine Health (opens in a new tab)

  16. Improved CBM of top drives using advanced sensors and novel analysis techniques

    … components such as the top drive. Top drive monitoring techniques today are only effective after a severe problem occurs on the top drive. The consequence of this is that when the top drive fails, it is always unexpected, resulting in unnecessarily high repair costs (an average of $60,000 - …

    texas Repository record for Improved CBM of top drives using advanced sensors and novel analysis techniques (opens in a new tab)

  17. Module-level autonomous settingless protection and monitoring for standalone and grid-connected photovoltaic array systems using quadratic integration modeling

    … a recently developed dynamic state-estimation based protection scheme, the settingless protection, to the photovoltaic (PV) industry for the first time. At this time, the proposed protection algorithm has been implemented on traditional protection zones for individual power system devices, but …

    gatech Repository record for Module-level autonomous settingless protection and monitoring for standalone and grid-connected photovoltaic array systems using quadratic integration modeling (opens in a new tab)

  18. Application of Optical Detection Methods for Top-of-Rail (TOR) Lubricity Evaluation on a Moving Platform for Revenue Service Track

    … of rail lubricity evaluation from spot check based methods that are solved by evaluating the track in a continuous, moving fashion. Based on the continuous moving data collected for this test, several new signal traits such as the spatial frequency (wavenumber) associated with the passing …

    vt Repository record for Application of Optical Detection Methods for Top-of-Rail (TOR) Lubricity Evaluation on a Moving Platform for Revenue Service Track (opens in a new tab)

Page 1 of 2