Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Conduction Error"”.
-
Conduction Error in Thermocouples Embedded in Low Conductivity Material
… The presence of the thermocouple induces error in the temperature measured. This error becomes significant if heat is conducted into or away from the point of measurement by the sensor itself, or if the sensor insulates the point. This would result from much larger thermal conductivity of …
-
An Experimental Conduction Error Calibration Procedure for Cooled Total Temperature Probes
… task which is subject to several sources of error. Conduction error is predominant among these sources since total temperature sensors are embedded into a cooled strut for measurement. This study seeks to understand the effect of conduction error on total temperature probe performance from an …
-
Mount Interference and Flow Angle Impacts on Unshielded Total Temperature Probes
… stems from attempting to minimize measurement error or accurately predict error so it can be accounted for. Conduction error and aerodynamic error are two very common sources of error in total temperature probe measurements. Numerous studies have been performed in prior literature to account …
-
Film cooling on a flat plate: investigating density
… temperatures. During the study the nature of the conduction effect from the heated coolant was studied and found to be most prevalent along the plate surface not through the plate from the plenum. A methodology was presented by which conduction error free results were obtained. The results showed …
-
Computational Modeling of Total Temperature Probes
… and tested at Virginia Tech to characterize conduction error. The probe was designed utilizing conventional total temperature design guidelines and modified with feedback from CFD analysis. This test case was used to validate the role of CFD in the design of total temperature probes and the …
-
Computational Modeling of Radiation Effects on Total Temperature Probes
… However, this sensor is characterized by errors due to conduction heat transfer from the sensing element, as well as errors associated with the flow over it. In particular in high temperature flows, the sensing element of the thermocouple will be much hotter than its surroundings, leading …