Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"Cone Calorimeter"”.

  1. Modeling full-scale fire test behaviour of polyurethane foams using cone calorimeter data

    … specimens, based on information obtained from cone calorimeter tests. Full-scale fire tests of 10 cm thick polyurethane foams of different sizes were conducted using center and edge-ignition locations. Flame spread and heat release rates were compared. For specimens of the same size, …

    sask Repository record for Modeling full-scale fire test behaviour of polyurethane foams using cone calorimeter data (opens in a new tab)

  2. Design and Analysis of New Gasification Apparatus based on the Standard Cone Calorimeter

    … apparatus is developed base on the standard cone calorimeter (ASTM E 1354). A controllable oxygen concentration (0% to 21% by volume) environment in the vicinity of 80 mm by 80 mm square sample positioned under the cone radiant heater is achieved by means of "Controlled Atmosphere Pyrolysis …

    maryland Repository record for Design and Analysis of New Gasification Apparatus based on the Standard Cone Calorimeter (opens in a new tab)

  3. Predicting the Ignition Time and Burning Rate of Thermoplastics in the Cone Calorimeter

    … Nylon 6/6, Polyethylene, and Polypropylene in a Cone Calorimeter heating assembly. The objective is to examine a testing protocol that leads to the prediction of ignition and burning rate for thermoplastics from Cone data. The flame heat flux is not measured, but is inferred from Cone data. The …

    maryland Repository record for Predicting the Ignition Time and Burning Rate of Thermoplastics in the Cone Calorimeter (opens in a new tab)

  4. Scalability of cone calorimeter test results for the prediction of full scale fire behavior of polyurethane foam

    … density sub-model and explores the effects of 1) cone calorimeter incident heat flux setting, 2) specimen thickness and 3) ignition location on the predictive capability of the CBUF model. To provide input for the CBUF model cone and furniture calorimeter tests were conducted. Cone calorimeter …

    sask Repository record for Scalability of cone calorimeter test results for the prediction of full scale fire behavior of polyurethane foam (opens in a new tab)

  5. Sampling-Window Based Approach for Fire Gas Analysis of Rigid Foams

    … during fire performance testing using the cone calorimeter. For this purpose, a Fourier Transform Intra-red (FTIR) Spectroscopy system and a Novatec analyzer were coupled to the cone calorimeter. An experimental gas sampling apparatus was designed and constructed and a sampling-window based …

    waterloo Repository record for Sampling-Window Based Approach for Fire Gas Analysis of Rigid Foams (opens in a new tab)

  6. Quantification of Flame Heat Feedback in Cone Calorimetry Tests

    … assess material flammability is the cone calorimeter. The goal of this project was to develop a spatially-resolved flame heat feedback model for 10 cm square horizontal specimens under buoyancy-driven flames to represent the conditions of the cone calorimeter and reasonably, the Fire …

    maryland Repository record for Quantification of Flame Heat Feedback in Cone Calorimetry Tests (opens in a new tab)

  7. Formulation and Burning Behaviour of Fire Retardant Polyisoprene Rubbers

    … rate method, Limiting Oxygen Index (LOI) and the cone calorimeter. Basic rubber mixtures were prepared to investigate the interactions between the polymer and additives, under TGA conditions. Zinc oxide was found to have little effect on the polymer decomposition, while silica reduced thermal …

    cent-lancashire Download file for Formulation and Burning Behaviour of Fire Retardant Polyisoprene Rubbers (opens in a new tab)

  8. USE OF MILLIGRAM-SCALE FLAME CALORIMETRY FOR CHARACTERIZING FLAMMABILITY OF FABRIC SAMPLES WITH FLAME RETARDANT TREATMENTS

    … of novel flame retardants, such as the Cone Calorimeter and Microscale Combustion Calorimeter can be prohibitively expensive or only provide a limited understanding of flame-retardant action. Fabrics present additional testing challenges due to their low density and thickness, …

    maryland Repository record for USE OF MILLIGRAM-SCALE FLAME CALORIMETRY FOR CHARACTERIZING FLAMMABILITY OF FABRIC SAMPLES WITH FLAME RETARDANT TREATMENTS (opens in a new tab)

  9. Toxic Species And Particulate Emissions From Wood And Pool Fires

    … ventilation conditions using the standard cone calorimeter and the controlled atmosphere cone calorimeter modified to enable raw gas sampling. Pool fires (Diesel, Lubricating oil and olive oil) were also investigated using the freely ventilated standard cone calorimeter. Pine wood crib and …

    whiterose Download PDF for Toxic Species And Particulate Emissions From Wood And Pool Fires (opens in a new tab)

  10. Modeling Of Thermal Properties Of Fiber Glass Polyester Resin Composite Under Thermal Degradation Condition

    … a constant heat flux and hydrocarbon fire in a cone calorimeter. A numerical model is an essential tool because it gives the composite designer the ability to predict results in a time and cost efficient manner. The goal of this thesis is to develop a numerical model to simulate a zonal-layer …

    ucf Repository record for Modeling Of Thermal Properties Of Fiber Glass Polyester Resin Composite Under Thermal Degradation Condition (opens in a new tab)

  11. Experimental and Numerical Modeling of Heat Transfer in Wall Assemblies

    … methods of scaling fire test results. Cone calorimeter tests were used to measure heat transfer through small-scale specimens that are representative of generic wall assemblies for which fire resistance ratings are given in the National Building Code of Canada. Test specimens had a …

    sask Repository record for Experimental and Numerical Modeling of Heat Transfer in Wall Assemblies (opens in a new tab)

  12. Investigation of the Fire Behaviour of PEEK-based Polymers and Compounds

    … have been utilised to examine PEEK such as the Cone Calorimeter (ISO 5660), UL-94 (EN 60695-10-11), Limiting Oxygen Index (LOI), Thermogravimetric Analysis (TGA) in both air and inert atmospheres and the Small Flame Ignitability Test (ISO 11925). PEEK decomposition has been investigated using …

    cent-lancashire Download file for Investigation of the Fire Behaviour of PEEK-based Polymers and Compounds (opens in a new tab)

  13. On the Potential Use of Small Scale Fire Tests for Screening Steiner Tunnel Results for Spray Foam Insulation

    … each hazard at the bench-scale. The ASTM E1354 cone calorimeter test measures a material's open-flaming heat release rate; it is proposed that the cone calorimeter test can be used to assess a material's relative flame hazard. The ISO 5659-2 smoke density chamber test measures a material's …

    waterloo Repository record for On the Potential Use of Small Scale Fire Tests for Screening Steiner Tunnel Results for Spray Foam Insulation (opens in a new tab)

  14. FLAMMABILITY PROPERTIES OF CLAY-NYLON NANOCOMPOSITES

    A Cone Calorimeter device has been used to measure the flammability properties of samples with different clay dispersion on the nanometer (molecular) scale. Specifically, chemical energy release rate, mass loss rate, and time to ignite (melt and char also) are measured. Samples consisting of pure …

    maryland Repository record for FLAMMABILITY PROPERTIES OF CLAY-NYLON NANOCOMPOSITES (opens in a new tab)

  15. Limiting conditions for a sustained flame over condensed fuels : Analysis by experiments and stagnant layer theory

    … influence on the threshold criteria. A cone calorimeter sample set-up was modified so that the sample material could be exposed to a more uniform heat flux and the influence of external heating on the critical mass flux could be better quantified. Porous gas burners have been used …

    lund Repository record for Limiting conditions for a sustained flame over condensed fuels : Analysis by experiments and stagnant layer theory (opens in a new tab) Download PDF for Limiting conditions for a sustained flame over condensed fuels : Analysis by experiments and stagnant layer theory (opens in a new tab)

  16. Thermal, Mechanical and Flammability Studies of Flame-retardant Polymer Nanocomposites

    … to explore the aspect of a real fire scenario in cone calorimeter. According to the fire reaction properties as measured in the cone calorimeter, both neat polystyrene and polystyrene nanocomposites have shown the trend of a thermally thick charring polymer in the heat release rate over time data. …

    tamu Repository record for Thermal, Mechanical and Flammability Studies of Flame-retardant Polymer Nanocomposites (opens in a new tab)

  17. Effects of Wool Fibres on Mechanical and Flammability Characteristics of Wool-Polypropylene Composites

    … confirmed by flammability tests. In particular, cone calorimeter and vertical burn tests have exhibited a significant decrease in peak heat release rate (PHRR) and a direct flame self-extinguishment of composites, respectively. Furthermore, the cone calorimeter experiments and char morphology …

    auckland-ms Repository record for Effects of Wool Fibres on Mechanical and Flammability Characteristics of Wool-Polypropylene Composites (opens in a new tab)

  18. Design and Implementation of the Flaming Combustion Calorimeter

    … testing of fire resistance is on bench-scale Cone Calorimeter. This test requires relatively large samples and is extremely expensive for developing new materials. An innovative instrument called the Flaming Combustion Calorimeter (FCC) was designed, built and implemented to measure the heat …

    maryland Repository record for Design and Implementation of the Flaming Combustion Calorimeter (opens in a new tab)

  19. Thermal Characterization of a Pool Fire in Crosswind With and Without a Large Downwind Blocking Object

    … to a convective flow and to radiation from a cone calorimeter heater. Measurements were influenced by differences between the calibration and measurement environments, differences in sensor surface temperature, and unaccounted thermal losses from the sensor plate. Heat flux results from the …

    waterloo Repository record for Thermal Characterization of a Pool Fire in Crosswind With and Without a Large Downwind Blocking Object (opens in a new tab)

Page 1 of 5