Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Constant cooling"”.
-
Quantification of cooling channel heat transfer in low pressure die casting
… quantitatively describe the heat transfer in the cooling channels of the low-pressure die casting process, which is the dominant commercial technology for the production of aluminum automotive wheels, and to successfully implement the methodology in a numerical model of the casting process. …
-
An Investigation into the Austenite Decomposition Behaviour and Post-Forming Tempering Response of Two 1800 MPa Grades of Press Hardening Steels
… of an austenite decomposition model after cooling and the effect of short tempering times after quenching on the final mechanical properties was examined. To assess the austenite decomposition model, both materials were subject to a variety of constant cooling and resulted in a mixed-phase …
-
Simulation and examination of directional solidification characteristics of hyper-eutectic Al-38wt%Cu alloys
… The experiments were carried out under different cooling conditions. The temperature gradients ranged from 1000 to 3500 (K/m) with a constant cooling rate of 3.5 (K/min), producing growth rates between 6-21 (cm/hr). The faceting behavior of primaryAl2Cu ([theta]) phase has been examined as a …
-
Morphology and properties of melt-spun polypropylene
… so that the effect of stress and the effect of cooling rate could be treated separately.</p><p>Quantitative conclusions based on the experimental data have been made. At low measured spinline stress polypropylene fibers possess spherulitic morphology. As spinline stress is increased a "row …
-
Control and Optimization of Vapor Compression Cycles Using Recursive Least Squares Estimation
… while meeting operational requirements such as constant cooling or constant evaporator outlet temperature. The experimental system used for controller evaluation is a custom built small-scale water chiller with three evaporators; each evaporator services a separate body of water, referred to as …
-
The thermodynamics (log K, [Delta]H°, [Delta]S°, [Delta]Cp°) of metal ligand interaction in aqueous solution.|nI.|p Design and construction of an isothermal titration calorimeter.|nII.|pThe interaction of cyanide ion with bivalent nickel, zinc, cadmium and mercury.|nIII.|pThe interaction of glycinate ion with bivalent manganese, iron, cobalt, nickel, copper, zinc and cadmium
… of heats of reaction and heats of solution at constant temperature. With this calorimeter, endothermic or exothermic processes can be studied at temperatures constant to ±0.0002°C. Heat effects are compensated by balancing the heat effect of the process taking place in the calorimeter against a …
-
Investigating ice nucleation at negative pressures using molecular dynamics: A first order approximation of the dependence of ice nucleation rate on pressure
… to -1000 atm, using Forward Flux Sampling and constant cooling simulations. We find that the density difference between ice and liquid water is central in determining the increase in nucleation rate with negative pressure. With these results, we analyze an equation that has been posed as a …
-
Simulation of an Air Cooled Single-Effect Solar Absorption Cooling System with Evacuated Tube Collectors
… challenging the scientific community. Absorption cooling systems give scope of utilizing low grade energy source for generating cooling effect. Solar energy is one of these low grade energy sources and with considering the fact that cooling demand increases with the intensity of solar radiation, …
-
A Rheological Characterization of Lava from the May 2021 Eruption of Nyiragongo Volcano, DRC
… evolution under equilibrium (i.e., at constant, subliquidus temperatures) as well as disequilibrium conditions (i.e., at varying cooling rates) through a series of isothermal, constant undercooling, (equilibrium) experiments and non-isothermal, constant cooling, (disequilibrium) …
-
Characterizing the Constitutive Behaviour and Austenite Decomposition of an 1,800 MPa Press Hardenable Boron Steel
… of PHS 1800 were also investigated via constant cooling rate experiments. The effect of deformation on the austenite decomposition was investigated at three strain levels (0%, 10%, 20%), for three different cooling rates (5°C/s, 10°C/s, 50°C/s). It was found that higher cooling rates …
-
Crystallization and thermo-viscoelastic modelling of polymer composites
… in the literature are only valid for either constant temperatures or cooling at constant cooling rates. Furthermore, the number of melt kinetics models is very limited and their application restricted to small heating rates. As a material point in the part may undergo complex temperature …
-
Heterogeneous ice nucleation by biomolecules
… challenges. This study demonstrates that the constant cooling rate approach is inadequate for accurately assessing Apoferritin subforms' ice nucleation rates due to data uncertainties. Isothermal measurements are employed to differentiate ice nucleating efficiencies of Apoferritin subforms …
-
Non-Axisymmetric Instabilities in Self-Gravitating Star-Disk Systems: Bifurcation of Rapidly Rotating Protostars
… of this system include radiative losses using a constant cooling function with a constant local cooling timescale. For weak cooling, the m=2 Fourier component of the density perturbation reaches maximal amplitude and a short-period, equal mass binary star system forms. For the system with a …
-
Development and Implementation of a Die Thermal Management Model (DTMM)
… between the molten metal and the die surface. A cooling system integrated into the die facilitates the rate of heat extraction at the die-molten metal interface. However, non-uniformity of die surface temperature can occur due to the variation in the amount of heat that needs to be extracted from …
-
Quiescent isothermal and nonisothermal crystallization of isotactic polypropylene
… investigations were conducted at various constant cooling rates that ranged from 2 to 80 °C/min. Direct microscopic studies via LDM on various resins showed that in all cases, isothermal crystallization proceeded, at least at the higher temperatures, by spherical growth from a fixed number …
-
Heat Flux Modeling of Asymmetrically Heated and Cooled Thermal Stimuli
… change can intensify the sensation of heating or cooling. Conversely, sufficiently low rates of change can go undetected by the skin. As such, the thermal response system can be manipulated by the proper combination of applied hot and cold stimuli. Previous research has shown that through precise …
-
Crystallization in Polymers: Analyzed with Molecular Dynamics and Machine Learning Models
… transformed into a semicrystalline state at a constant cooling rate and subsequently melted at a constant heating rate. The phase behavior is analyzed by determining specific volume, segment orientation parameter, and tensile stress under constant crosslink density and deformation. …
-
Thermodynamic and kinetic effects of ionic liquids in gas hydrate inhibition
… of experimental parameters such as agitation and cooling rates were optimised in order to ensure the reproducibility of the data obtained. Due to the stochastic nature of hydrate formation, it was important to minimise the degree of error with the formation points. Preliminary tests displayed that …
-
Investigation of Methodologies for Minimizing Buildings Electricity Demand and Cost
… important phenomenon of building load and cooling coil operations. The intellectual contribution of this research is the understanding of multiple-zone interactions in buildings to aid in effective decision making regarding the operational states of HVAC equipment that minimizes overall …
-
Solidification in the mold of a continuous billet caster
… where the solidifying shell is subjected to a constant cooling rate and the solidification front proceeds at a minimal speed. The shell thickness corresponding to the second band which was dark or deeply etched was found to have developed at the midface very close to the bottom of the mould. …
Page 1 of 2