Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Construction Specifications"”.

  1. The engineering of construction specifications for externally bonded FRP composites

    … on the theme of developing engineering and the construction specifications for externally bonded FRP composites. For particular, the work focuses on three critical aspects of the performance of FRP systems: fiber misalignment, comer radius, and lap splice length. Based on both experimental and …

    must-thes Repository record for The engineering of construction specifications for externally bonded FRP composites (opens in a new tab)

  2. Construction Specifications And Analysis Of Rehabilitation Techniques Of Pervious Concrete Pavement

    … to analyze rehabilitation techniques and develop construction specifications for the construction of portland cement pervious concrete specific to the state of Florida. Currently, a consistent statewide policy has not been established in reference to credit for storage volume within the voids in …

    ucf Repository record for Construction Specifications And Analysis Of Rehabilitation Techniques Of Pervious Concrete Pavement (opens in a new tab)

  3. Cohesive soil embankments: Iowa DOT design and construction specifications and resultant embankment quality

    … quality deficiencies under the current Iowa DOT specifications and to field test alternative embankment acceptance procedures and methods for cohesive soils that would result in improved embankment quality. Field research activities included observations of fill placement, in-place moisture and …

    iastate Repository record for Cohesive soil embankments: Iowa DOT design and construction specifications and resultant embankment quality (opens in a new tab)

  4. Characterization of cohesionless soils for embankments: Alternative Iowa Department of Transportation design and construction specifications

    … specification revisions for the design and construction of highway embankments. Emphasis was placed on evaluation of in-situ techniques for evaluating embankment quality. In July, 1998, the research was divided into cohesive and cohesionless categories, with each category being addressed in …

    iastate Repository record for Characterization of cohesionless soils for embankments: Alternative Iowa Department of Transportation design and construction specifications (opens in a new tab)

  5. An evaluation of current West Virginia specifications and construction methods regarding the density of hot mix asphalt

    … the quality of the material, the mix design, and construction. The objectives of pavement construction are to place the material with a smooth surface, and compacted to the target density. Inadequate density permits water to enter the pavement leading to premature distress. It also can contribute …

    wvu Repository record for An evaluation of current West Virginia specifications and construction methods regarding the density of hot mix asphalt (opens in a new tab)

  6. The Effects of Limestone Powder Particle Size on the Mechanical Properties and the Life Cycle Assessment of Concrete

    … of limestone powder in concrete to meet construction specifications. This study utilizes limestone powders with different particle sizes to replace a part of portland cement in various replacement levels. Studying the microstructure of the limestone powder in concrete with a petrographic …

    texas-state Repository record for The Effects of Limestone Powder Particle Size on the Mechanical Properties and the Life Cycle Assessment of Concrete (opens in a new tab)

  7. Use of Recycled Aggregate Materials Characteristics in Pavement Design Analyses

    … materials promotes sustainability in roadway construction by reducing consumption of energy and emission of greenhouse gases associated with mining and the production of natural aggregates. Recycled asphalt pavements (RAP) and recycled concrete aggregates (RCA) have comparable characteristics …

    msu Repository record for Use of Recycled Aggregate Materials Characteristics in Pavement Design Analyses (opens in a new tab)

  8. Performance Specification for Tennessee Bridge Decks

    … decks, throughout the state, through an improved construction specification which will encourage the increased use of supplementary cementitious materials. These improved construction specifications would be performance based in nature and would give suppliers increased freedom to provide a more …

    ut-knoxville Repository record for Performance Specification for Tennessee Bridge Decks (opens in a new tab)

  9. Permeability of hot mix asphalt concrete as affected by binder content

    … suggests several changes to West Virginia's construction specifications, including permeability testing as part of the mix design process. Changing the maximum air void specifications from 8 to 7 percent is suggested to reduce the possibility of the construction of permeable pavements to …

    wvu Repository record for Permeability of hot mix asphalt concrete as affected by binder content (opens in a new tab)

  10. Evaluation of Curing Effects on Cold In-Place Recycled (CIR) Materials

    Most cold In-place recycled (CIR) construction use asphalt emulsion or foamed asphalt with or without active fillers as a stabilizing agent. To ensure the CIR layer gains appreciable stiffness and strength to support traffic, the stabilizing agents have to undergo curing (to gradually develop …

    unh-thes Repository record for Evaluation of Curing Effects on Cold In-Place Recycled (CIR) Materials (opens in a new tab)

  11. Field evaluation of composite materials for bridge strengthening

    … and studied, in particular those associated to construction, analysis and design, load testing, load rating and monitoring. One of the intellectual merit of the present dissertation consist of development of materials and construction specifications, a comprehensive document developed to make …

    must-thes Repository record for Field evaluation of composite materials for bridge strengthening (opens in a new tab)

  12. Materials for a Prototype Human Habitable Bridge

    A review is made of the general non-construction specifications for innovative as well as construction specification literature available for these materials. This innovation and utilization of advanced composite materials (ACM’s), in the architectural and construction industry, allows for shapes …

    hawaii Repository record for Materials for a Prototype Human Habitable Bridge (opens in a new tab)

  13. Processing and Analysis of Lidar Derived Point Cloud Models of Low-Rise Large-Volume Steel Frame Buildings Damaged in Hurricane Michael

    … can be obtained within the margin of error for construction tolerances allowed in AISC steel building construction specifications. It is found that measurements of structural cross-sections are possible from the obtained data but require specific scanner locations and more rigorous …

    washington Repository record for Processing and Analysis of Lidar Derived Point Cloud Models of Low-Rise Large-Volume Steel Frame Buildings Damaged in Hurricane Michael (opens in a new tab)

  14. Using design-based change orders as a lessons learned metric in university dormitory construction

    … change order study that previously examined new construction on campus. The current study is part of a lessons learned initiative to improve the cost effectiveness of University construction projects. New dormitory construction projects were the main focus of this study and the change data from …

    alabama Repository record for Using design-based change orders as a lessons learned metric in university dormitory construction (opens in a new tab)

  15. Chemical compatibility of soil-bentonite cutoff wall backfills containing modified bentonites

    … (SW101). Once slurries that met typical construction specifications had been created using the various bentonites,the model SB backfills were prepared for each type of bentonite. These backfills werealso designed to meet conventional construction and design requirements. The SB backfills …

    bucknell Repository record for Chemical compatibility of soil-bentonite cutoff wall backfills containing modified bentonites (opens in a new tab)

  16. Identifying the Economic Barriers to CLT Cost Estimation Among Building Construction Professionals

    … of alternative materials in commercial construction. CLTs are not included in these current cost estimation tools and software packages which may be limiting the potential use of CLT in construction. The purpose of this study was to discover if cost estimation is being used to make …

    vt Repository record for Identifying the Economic Barriers to CLT Cost Estimation Among Building Construction Professionals (opens in a new tab)

  17. Proposed Design for a Coupled Ground-Source Heat Pump/Energy Recovery Ventilator System to Reduce Building Energy Demand

    … of an energy efficient home, the assumed construction specifications, and the climate characteristics of the Blacksburg, Virginia region. The results from the load analysis were used to predict energy consumption and costs associated with annual operations.The results for the predicted …

    vt Repository record for Proposed Design for a Coupled Ground-Source Heat Pump/Energy Recovery Ventilator System to Reduce Building Energy Demand (opens in a new tab)

  18. Assessment of the State of the Practice of Rigid Inclusions Supported Structures in Transportation Applications

    … support in transportation projects, including construction specifications, installation effects, and design methods for vertical load transfer. An internet survey was conducted to gather opinions from owners, engineers, and researchers about the state of the practice in the U.S. Evaluation of …

    ku Repository record for Assessment of the State of the Practice of Rigid Inclusions Supported Structures in Transportation Applications (opens in a new tab)

Page 1 of 2