Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 54 for “"Contact material"”.

  1. Electrical contact material arc erosion: experiments and modeling towards the design of an AgCdO substitute

    AgCdO is one of the most widely used contact materials in the world because of its outstanding performance. Nevertheless, due to environmental considerations, it will soon be completely forbidden by European environmental directives. Therefore, finding a good substitute is of crucial importance. …

    gatech Repository record for Electrical contact material arc erosion: experiments and modeling towards the design of an AgCdO substitute (opens in a new tab)

  2. A study of the creation and characterization of nitrogen doped CuInSe2 (CIS:N), as a potential improved back contact material for CdTe and Cu(IN_xGA_1-x)Se2 photovoltaic cells

    … into CuInSe2 (CIS), and other related materials, using a scalable, commonly used, technique. The growth characteristics, film morphology and electronic properties of these N doped materials, as it is affected by nitrogen, are studied, both in films grown with nitrogen, and in films …

    uiuc Repository record for A study of the creation and characterization of nitrogen doped CuInSe2 (CIS:N), as a potential improved back contact material for CdTe and Cu(IN_xGA_1-x)Se2 photovoltaic cells (opens in a new tab)

  3. Alloy effects on nickel silicides formation and the investigation of NiSi as electrode material of ZnO devices

    Nickel silicide (NiSi) is a potential contact material for 90 nm or below feature size ULSI devices, due to its lower resistivity, lower Si consumption, independency with line width, and compatibility with SiGe-based technology. However, application of NiSi in industry still faces two big problems: …

    nus Repository record for Alloy effects on nickel silicides formation and the investigation of NiSi as electrode material of ZnO devices (opens in a new tab) Download file for Alloy effects on nickel silicides formation and the investigation of NiSi as electrode material of ZnO devices (opens in a new tab)

  4. Development and Characterization of Next-Generation Contact Materials for Nanoelectromechanical Switches

    … technology. However, the reliability of the contact interface currently limits the commercialization of NEM switches, as the electrical contact has to be able to physically open and close up to a quadrillion (10^15) times without failing due to adhesion (by sticking shut) or contamination …

    penn Repository record for Development and Characterization of Next-Generation Contact Materials for Nanoelectromechanical Switches (opens in a new tab)

  5. Development of contacting material for cathode chamber in the solid oxide fuel cell

    … and long-term testing of cathode-interconnect contact materials for the solid-oxide fuel cell (SOFC). The research effort was focused on the utilization of silver and silver cerments. Silver is an attractive candidate contact material due to its high ductility, high conductivity, and low cost …

    wvu Repository record for Development of contacting material for cathode chamber in the solid oxide fuel cell (opens in a new tab)

  6. Microwear Patterns on Experimental Cache Creek Basalt Tools

    … mlcroflake scar attributes, use action and contact material hardness are more clearly understood. In addition, mlcropolish characteristics have been related to contact material, duration of use and tool action in a seven-stage developmental model. Distinctive microwear patterns resulting …

    sask Repository record for Microwear Patterns on Experimental Cache Creek Basalt Tools (opens in a new tab)

  7. Microwave resonant sensors for characterizing electrical properties at microwave and optical frequencies

    Materials exhibit diverse electromagnetic responses across a broad spectrum, characterized by parameters such as permittivity, permeability, and refractive index. This thesis investigates microwave resonant structures as high-sensitivity sensors for material property detection. The limitations of …

    ubc Repository record for Microwave resonant sensors for characterizing electrical properties at microwave and optical frequencies (opens in a new tab) Download PDF for Microwave resonant sensors for characterizing electrical properties at microwave and optical frequencies (opens in a new tab)

  8. Ion-Sensing Systems Based on Mesoporous Carbon: from Bulk Electrodes to Paper-Based Ion Sensors

    … ISEs and reference electrodes, in which a solid contact is used as an ion-to-electron transducer, are highly desirable. Compared with conventional ISEs, all-solid-state ISEs offer comparable electrochemical performance with the distinct advantages of simple maintenance and miniaturization. This …

    umn Repository record for Ion-Sensing Systems Based on Mesoporous Carbon: from Bulk Electrodes to Paper-Based Ion Sensors (opens in a new tab)

  9. The Current Voltage Characteristics of Electron Beam Controlled Thin Film Diamond Switches

    … was measured up to a range of 7000Ncm'. The contact material was aluminum, annealed and unannealed. Switching experiments were performed with electron energies ranging from 70keV to 172keV. The switching results obtained are strongly dependent on the biasing polarity, incident electron …

    odu Repository record for The Current Voltage Characteristics of Electron Beam Controlled Thin Film Diamond Switches (opens in a new tab)

  10. Optimised solder interconnections in crystalline silicon (c-Si) photovoltaic modules for improved performance in elevated temperature climate

    … The investigated RIFs are operating temperature, material combination and interconnection geometry. Garofalo creep relations and temperature dependent Young’s Modulus of Elasticity are used to model solder properties, EVA layer is modelled as viscoelastic while the other component layers are …

    wlv Repository record for Optimised solder interconnections in crystalline silicon (c-Si) photovoltaic modules for improved performance in elevated temperature climate (opens in a new tab) Download file for Optimised solder interconnections in crystalline silicon (c-Si) photovoltaic modules for improved performance in elevated temperature climate (opens in a new tab)

  11. The Fabrication of Very Short Gate-Length GaAs Field Effect Transistor Devices

    … devoted to the development of a low temperature contact technology which could be used for the formation of ohmic contacts to GaAs. The low temperature was thought to be necessary to prevent undesired diffusion of the contact material during annealing, particularly on devices with closely spaced …

    glasgow Download PDF for The Fabrication of Very Short Gate-Length GaAs Field Effect Transistor Devices (opens in a new tab)

  12. RE AND PD GAN SCHOTTKY BARRIER DIODE HTOL STRESS TESTING AND RELIABILITY AND ROBUSTNESS CIRCUIT DESIGN

    … current GaN devices struggle to maintain stable contacts at high current operation for long durations due to reactions between the device and the contact material. One focus of this research project is to improve the reliability and longevity of vertical GaN Schottky diodes using Rhenium (Re) and …

    nps Repository record for RE AND PD GAN SCHOTTKY BARRIER DIODE HTOL STRESS TESTING AND RELIABILITY AND ROBUSTNESS CIRCUIT DESIGN (opens in a new tab)

  13. In-situ surface wear processes of gold coated carbon nanotube MEMS electrical contacts

    … of micro electromechanical system (MEMS) switch contacts. The investigation is focused on a composite contact material that is composed of vertically aligned multiwalled carbon nanotubes (MWCNT) with a conductive gold film coating to form an Au/MWCNT composite. A testing system, termed the …

    soton Download PDF for In-situ surface wear processes of gold coated carbon nanotube MEMS electrical contacts (opens in a new tab)

  14. Innovative Approaches to Increase Productivity in Sink Electrical Discharge Machining

    … which utilizes spark erosion to remove workpiece material. Sink EDM refers to the use of prismatic or volumetric electrodes to create cavities or pockets within a workpiece. Sink EDM offers benefits over traditional forms of subtractive manufacturing such as Milling or Drilling due to its …

    mcmaster Repository record for Innovative Approaches to Increase Productivity in Sink Electrical Discharge Machining (opens in a new tab)

  15. Fabrication and Transport Properties of Carbon Nanotube Quantum Dots with Ferromagnetic and Superconducting Leads

    … simple to fabricate with a wide range of metal contact materials. Quantum transport in a zero dimensional carbon nanotube quantum dot is dominated by the device length, choice of contact material, and symmetries inherent in the nanotube. By fabricating carbon nanotube quantum dots with …

    jhu Repository record for Fabrication and Transport Properties of Carbon Nanotube Quantum Dots with Ferromagnetic and Superconducting Leads (opens in a new tab)

  16. Passive harmonic generation at spring contacts

    … harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are …

    must-thes Repository record for Passive harmonic generation at spring contacts (opens in a new tab)

  17. Recycled material web map: connecting consumers and producers

    … connects producers and consumers of recyclable material was developed to assist engineers and contractors in the beneficial reuse of recycled materials in transportation projects. The Recycled Material Web Map is comprised of four core layers: producers, stockpiles, specifications, and case …

    alabama Repository record for Recycled material web map: connecting consumers and producers (opens in a new tab)

  18. Design of Electrical Contacts for Fast Mechanical Disconnect Switches

    … for the design considerations for electrical contacts with the goal to improve the performance of fast mechanical disconnect switches (FMS). The design of electrical contacts involves tradeoffs between current rating, voltage rating and speed of FMS, which are demonstrated for an FMS prototype …

    gatech Repository record for Design of Electrical Contacts for Fast Mechanical Disconnect Switches (opens in a new tab)

  19. Development and characterization of ion-selective electrodes based on laser-induced graphene for food safety and precision agriculture

    … second chapter is a review and tutorial of solid-contact ISEs. LIG is used as the solid-contact to investigate the relationship between solid-contact surface properties and the resulting electrochemical properties. The concepts and techniques discussed are applicable to any solid-contact material …

    iastate Repository record for Development and characterization of ion-selective electrodes based on laser-induced graphene for food safety and precision agriculture (opens in a new tab)

Page 1 of 3