Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Continuous Galvanizing"”.
-
Pot heat balance analysis in continuous galvanizing lines
Galvanizing is an energy intensive industry. Knowing how much energy is consumed when producing a certain product will help the company in determining which products can be produced to maximize profits. E-GEPDSS was built to explore the potential of saving energy in galvanizing lines by utilizing …
-
Analysis of energy consumption in continuous galvanizing lines
The pot hardware in continuous galvanizing lines is prone to failure and needs to be replaced quite frequently. This resulted in considerable loss of production time. Also equipment like, the molten zinc pot and annealing furnace cannot be turned off during downtime resulting in considerable energy …
-
Long-term performance of pot hardware in continuous galvanizing lines
Preliminary comparative wearing tests were conducted on wearguard bearing system against CF3M (casting version of 316L steel), with tungsten carbide laser clad coating, at 30% and 50% production line tension. Tests were also conducted on Stellite 6 against Tribaloy T 400 at 50% production line …
-
Heat balance analysis of annealing and galvanneal furnace in continuous galvanizing lines
Galvanizing facilities are highly energy intensive operation with electrical and fuel energy representing a significant share of their total energy usage. Furnaces are extensively used in galvanizing process. Production process expertise along with the energy conservation practices can play a …
-
Evaluation of surface mechanical properties of pot hardware materials in continuous galvanizing lines
Pot hardware in continuous galvanizing lines is subjected to harsh and corrosive environment. The application of pot hardware in such conditions can cause surface degradation of the pot hardware materials thereby decreasing their life. The surface degradation can be due to wear, decrease in …
-
SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS
Aluminium is usually added to the continuous hot-dip galvanizing bath to improve coating ductility and adhesion through the rapid formation of a thin Fe-Al intermetallic layer at the substrate-liquid interface, thereby inhibiting the formation of brittle Fe-Zn intermetallic compounds. On the other …
-
EXPERIMENTAL AND NUMERICAL STUDY OF CONTINUOUS GALVANIZING GAS JET WIPING VIA A MULTI-SLOT AIR KNIFE
… thickness reduction and noise elimination in the continuous galvanizing gas jet wiping process. Gas jet wiping is an effective hydrodynamic method for controlling the final zinc coating thickness on a moving steel substrate during continuous hot dip galvanizing (CHDG). In this process, an …
-
Microstructure and Mechanical Properties of Al and Al/Si Alloyed TRIP-assisted Steels Produced through Galvanizing Heat Treatments
… to the automotive industry. Simultaneously, galvanizing is essential for the corrosion resistance of these steels. In industrial practice, the processing of TRIP-assisted steels and galvanizing process must be combined.</p> <p>Two Al-alloyed TRIP-assisted steels (<strong>1.0Al: …
-
Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing
… (wt.%) advanced high strength steels during continuous galvanizing was investigated. The effect of the addition of 0.05 wt.% Sn on the selective oxidation and reactive wetting of the Fe-0.1C-2Mn-1.7Si (wt.%) steel was also determined. The experimental steels were annealed at intercritical …
-
The effect of Sn microalloying on the selective oxidation kinetics and reactive wetting of advanced high strength steels
… candidates for automotive applications, but continuous galvanizing for corrosion protection by Zn-based coatings can be challenging, as external Mn oxides that form during annealing under the resident N2-H2-H2O process atmosphere are detrimental to reactive wetting. Microalloying with 0.01 …
-
Microstructural Evolution and Mechanical Properties of a Medium Manganese Transformation Induced Plasticity Third Generation Advanced High Strength Steel
… and overageing stages compatible with the continuous galvanizing process were investigated in terms of their effects on the microstructure and the mechanical properties from the as-received, tempered martensite (TM) microstructure and a fully martensitic (M) starting microstructure. Samples …
-
Mechanical Property Development and Galvanizing of a Medium-Mn Third-Generation Advanced High Strength Steel
… of specific strength and ductility. However, the continuous galvanizing of these steels is challenging because their thermal processing routes are not always compatible with existing continuous galvanizing line (CGL) infrastructure and the selective oxidation of the main alloying elements during …
-
Effect of Surface State on Radiative Properties of Advanced High Strength Steel Strips
… measurement and heating control of AHSS during continuous galvanizing, by determining how spectral emissivity depends on surface state, AHSS alloy composition, and annealing atmosphere. To achieve this, the relationship between AHSS surface topography and spectral emissivity is elucidated in the …
-
Dross formation mechanism and development of wear resistant scraper in aluminum-silicon-zinc coating bath.
… molten metal corrosion of the pot hardware in continuous galvanizing lines. The development of steel sheet with corrosion resistant for more than 30 years using a high aluminum content zinc coating has made an impact in the construction industry. High aluminum content bath (55 wt%) causes …
-
Dissolution and diffusion characteristics of 316L stainless steel in molten zinc containing variable concentrations of aluminum
… metal corrosion of pot hardware materials in continuous galvanizing lines is an important factor in maintaining high productivity at steel sheet mills around the world. A complete understanding of the mechanisms which impact the corrosion properties of structural metals submerged in industrial …
-
Selective oxidation and reactive wetting of an Fe-0.15C-5.5Mn-1.17Si-1Al advanced high strength steel (AHSS) during hot-dip galvanizing
… the annealing stage prior to immersion in the galvanizing Zn(Al, Fe) bath, the process of continuous hot-dip galvanizing of these steel is challenging. This thesis determined the influence of annealing process parameters such as oxygen partial pressure and annealing time, on the selective …
-
Improving Pyrometry of Advanced High Strength Steels During Intercritical Annealing
… and temperature control process of an industrial continuous galvanizing line (CGL), the in situ effect of process parameters, such as chemical composition, annealing temperature, and atmosphere dew point, on the radiative properties of AHSS was observed and modelled. Using in situ measurements …
-
Effect of Starting Microstructure and CGL Compatible Thermal Processing Cycle on the Mechanical Properties of a Medium Mn Third Generation Advanced High Strength Steel
… steels need to be compatible with the industrial continuous galvanizing line (CGL) in order to successfully employ them in the automotive manufacturing industry. The main objective of the present research was to develop a CGL compatible thermal processing cycle for a prototype medium Mn steel that …
-
Effect of Coating Microstructure on the Electrochemical Properties of Continuous Galvanized Coatings on Press Hardened Steels
In response to more stringent global CO2 emissions, automotive manufacturers have increased the use of advanced high strength steels (AHSS). Ultra-high strength steels are often used within the body-in-white (BIW) for safety critical parts and structural reinforcements, such as roof rails and side …
-
Phase Transformation Kinetics in Medium-Mn Third-Generation Advanced High Strength Steels
… holding time of 120 s, suitable for industrial continuous galvanizing lines. The DICTRA-based model, in conjunction with the modified Koistinen–Marburger model was employed to enhance the estimation of RA vol.% in med-Mn steels. In situ HEXRD experiments, along with complementary microstructural …
Page 1 of 2