Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Continuous Hot-Dip Galvanizing"”.

  1. Experimental Investigation of Air-Knife Geometry in Continuous Hot-Dip Galvanizing

    … is the production of galvanized steel strip in a continuous hot-dip galvanizing line. In this process, an impinging jet is used to remove the excess zinc alloy from the steel strip and control the final coating weight by applying wall pressure and shear stress on the moving substrate emerging from …

    mcmaster Repository record for Experimental Investigation of Air-Knife Geometry in Continuous Hot-Dip Galvanizing (opens in a new tab)

  2. A model of stabilizer roll bearing for a continuous hot-dip galvanizing line

    … the cause for the unscheduled shutdown of a galvanizing line. The lifetime of the hardware used in these lines is not only a function of materials used but also on factors such as line speed, sheet tension, bearing contact pressure, bearing alignment, zinc pot temperature, corrosion as a …

    wvu Repository record for A model of stabilizer roll bearing for a continuous hot-dip galvanizing line (opens in a new tab)

  3. Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing

    … (wt.%) advanced high strength steels during continuous galvanizing was investigated. The effect of the addition of 0.05 wt.% Sn on the selective oxidation and reactive wetting of the Fe-0.1C-2Mn-1.7Si (wt.%) steel was also determined. The experimental steels were annealed at intercritical …

    mcmaster Repository record for Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing (opens in a new tab)

  4. SELECTIVE OXIDATION AND REACTIVE WETTING OF FE-0.1C-6MN-2SI-xSN ADVANCED HIGH STRENGTH STEELS DURING CONTINUOUS HOT-DIP GALVANIZING

    … specific strength and ductility. However, the continuous hot-dip galvanizing of these steels is challenging due to selective oxidation of the main alloying elements such as Mn, Si, Al and Cr at the steel surface during the annealing step prior to immersion in the galvanizing Zn(Al, Fe) bath, as …

    mcmaster Repository record for SELECTIVE OXIDATION AND REACTIVE WETTING OF FE-0.1C-6MN-2SI-xSN ADVANCED HIGH STRENGTH STEELS DURING CONTINUOUS HOT-DIP GALVANIZING (opens in a new tab)

  5. Solidification of Hot-Dip Galvanized Coatings

    <p>Continuous hot-dip galvanizing is a common industrial process in which a steel sheet is immersed in a molten zinc alloy bath. After solidification, a thin zinc-rich layer is formed on the steel surface which protects the substrate in corrosive environments. Small amounts of antimony are …

    mcmaster Repository record for Solidification of Hot-Dip Galvanized Coatings (opens in a new tab)

  6. SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS

    Aluminium is usually added to the continuous hot-dip galvanizing bath to improve coating ductility and adhesion through the rapid formation of a thin Fe-Al intermetallic layer at the substrate-liquid interface, thereby inhibiting the formation of brittle Fe-Zn intermetallic compounds. On the other …

    mcmaster Repository record for SHORT-TERM FORMATION KINETICS OF THE CONTINUOUS GALVANIZING INTERFACIAL LAYER ON MN-CONTAINING STEELS (opens in a new tab)

  7. Skin Friction and Fluid Dynamics of a Planar Impinging Gas Jet

    … drying, and coating control processes. In continuous hot-dip galvanizing, a molten zinc-based coating is applied to a steel substrate for corrosion protection. Planar impinging gas jets (industrially called air-knives) are employed to wipe the protective coating from the steel sheet to …

    mcmaster Repository record for Skin Friction and Fluid Dynamics of a Planar Impinging Gas Jet (opens in a new tab)

  8. Numerical Investigation of Multiple-Impinging Slot Jets in the Gas-Jet Wiping of Liquid Zinc Coatings

    … blades, cooling of electronic devices and in the continuous hot-dip galvanizing line, which is the focus of this study. An impinging slot jet is used to control the zinc film thickness on the sheet substrate to reach uniform product coating thickness by applying a pressure gradient and shear …

    mcmaster Repository record for Numerical Investigation of Multiple-Impinging Slot Jets in the Gas-Jet Wiping of Liquid Zinc Coatings (opens in a new tab)

  9. Selective oxidation and reactive wetting of an Fe-0.15C-5.5Mn-1.17Si-1Al advanced high strength steel (AHSS) during hot-dip galvanizing

    … the annealing stage prior to immersion in the galvanizing Zn(Al, Fe) bath, the process of continuous hot-dip galvanizing of these steel is challenging. This thesis determined the influence of annealing process parameters such as oxygen partial pressure and annealing time, on the selective …

    mcmaster Repository record for Selective oxidation and reactive wetting of an Fe-0.15C-5.5Mn-1.17Si-1Al advanced high strength steel (AHSS) during hot-dip galvanizing (opens in a new tab)

  10. EXPERIMENTAL AND NUMERICAL STUDY OF CONTINUOUS GALVANIZING GAS JET WIPING VIA A MULTI-SLOT AIR KNIFE

    … thickness reduction and noise elimination in the continuous galvanizing gas jet wiping process. Gas jet wiping is an effective hydrodynamic method for controlling the final zinc coating thickness on a moving steel substrate during continuous hot dip galvanizing (CHDG). In this process, an …

    mcmaster Repository record for EXPERIMENTAL AND NUMERICAL STUDY OF CONTINUOUS GALVANIZING GAS JET WIPING VIA A MULTI-SLOT AIR KNIFE (opens in a new tab)

  11. Galvanization of Al-Si Trip-Assisted Steels

    … However, to be used in automotive exposed parts galvanizing is essential to provide corrosion protection. Galvanizing of TRIP steels poses two major challenges: i) the heat treatment used to obtain the TRIP steel microstructure and mechanical properties is not necessarily compatible with the …

    mcmaster Repository record for Galvanization of Al-Si Trip-Assisted Steels (opens in a new tab)

  12. EFFECT OF Sb-MICRO ADDITIONS ON THE OXIDATION KINETICS AND REACTIVE WETTING OF ADVANCED HIGH-STRENGTH STEELS

    … thinner material cross-sections. However, galvanizing these steels through the continuous hot-dip galvanizing process is challenging, because the main alloying elements such as Mn, Si, Al, and Cr tend to selectively oxidize on the steel surface during the annealing process before being …

    mcmaster Repository record for EFFECT OF Sb-MICRO ADDITIONS ON THE OXIDATION KINETICS AND REACTIVE WETTING OF ADVANCED HIGH-STRENGTH STEELS (opens in a new tab)

  13. Mechanical Property Development, Selective Oxidation, and Galvanizing of Medium-Mn Third Generation Advanced High Strength Steel

    … of these steels should be compatible with continuous galvanizing line (CGL) processing capabilities as it provides cost-effective, robust corrosion protection for autobody parts. Hence, the main objective of this Ph.D. research is to develop a CGL-compatible thermal processing route for a …

    mcmaster Repository record for Mechanical Property Development, Selective Oxidation, and Galvanizing of Medium-Mn Third Generation Advanced High Strength Steel (opens in a new tab)

  14. Coating of High Strength Steels with a Zn-1.6Al-1.6Mg Bath

    Recently, Zn-XAl-YMg coatings have emerged as lighter-weight substitutes for traditional Zn-based coatings for the corrosion protection of steels; however, little is currently known concerning the interactions between the oxides present on advanced high strength steel (AHSS) surfaces and the …

    mcmaster Repository record for Coating of High Strength Steels with a Zn-1.6Al-1.6Mg Bath (opens in a new tab)