Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Continuous bridges"”.

  1. Numerically Modeling Steel Continuous Bridges for Early Age Concrete Deck Cracking

    … It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently …

    arkansas Repository record for Numerically Modeling Steel Continuous Bridges for Early Age Concrete Deck Cracking (opens in a new tab)

  2. Simple made continuous bridges with steel diaphragms: tension and compression transfer mechanisms

    Simple-made-continuous (SMC) steel bridges are a relatively new innovation in steel bridge design. The SMC concept has been used for quite some time in the construction of precast concrete bridges and based on current statistics, precast concrete bridge construction is outpacing steel bridge …

    colostate Repository record for Simple made continuous bridges with steel diaphragms: tension and compression transfer mechanisms (opens in a new tab)

  3. Study of Internal Strains Developed in Concrete Decks at Early Ages in Steel Continuous Bridges

    … many contractors throughout Arkansas are using continuous deck pours. This construction approach may restrict the concrete slab from movement during early age shrinkage, causing tensile stresses to develop. The final stresses at the end of construction must be lower than the concrete tensile …

    arkansas Repository record for Study of Internal Strains Developed in Concrete Decks at Early Ages in Steel Continuous Bridges (opens in a new tab)

  4. WIM based load models for bridge serviceability limit states

    … margin of existing infrastructure and new design bridges. The Serviceability Limit States, i.e. fatigue, requires additional statistical parameters and not only the maximum values but also load spectra, i.e. frequency of occurrence of loads. The maximum values are needed for shorter time periods, …

    nebraska Repository record for WIM based load models for bridge serviceability limit states (opens in a new tab)

  5. Development of design criteria for continuous composite I-beam bridges with skew and right alignments

    … structural performance of two lane, two span, continuous composite I-beam bridges were investigated. A linear, elastic, finite element analysis of 288 bridges was done for both positive and negative moments. All these structures had a regular geometry, with a uniform concrete deck resting on …

    uiuc Repository record for Development of design criteria for continuous composite I-beam bridges with skew and right alignments (opens in a new tab)

  6. Performance Study of Link Slab Continuity in Prestressed Concrete Bridges

    Link slabs in bridges can be a cost-effective solution to increase the service life of bridge structures. The partial continuity condition in link slab bridges, however can be challenging to quantify. In this work link slab performance is studied by means of a parametric study, a long-term …

    lsu-thes Repository record for Performance Study of Link Slab Continuity in Prestressed Concrete Bridges (opens in a new tab)

  7. Evaluation of a new bridge formula for regulation of truck weights

    … Formula B (BFB), established in 1974 to protect bridges against excessive overstress, is very restrictive on long combination vehicles due to an 80,000 lb gross vehicle weight limit. Without this limit the formula will not be able to protect bridges in the cases of longer trucks. A formula …

    tamu Repository record for Evaluation of a new bridge formula for regulation of truck weights (opens in a new tab)

  8. Design of Continuous Prestressed Concrete Spliced Girder Bridges

    Traditionally, prestressed concrete girder bridges are limited to 150 ft span lengths in Texas due to restrictions on handling and transportation. An effective way of increasing span lengths of precast, prestressed concrete girder bridges is demonstrated using splicing technique. In spliced girder …

    tamu Repository record for Design of Continuous Prestressed Concrete Spliced Girder Bridges (opens in a new tab)

  9. Effects of extreme gravity and seismic loads on short to medium span slab-on-girder steel highway bridges.

    … in the original design, on slab-on-girder steel bridges. In the first part of this thesis the effect of extreme gravity loads on slab-on-girder steel bridges is studied. Currently, in many jurisdictions of North America, special permits are issued to extra-heavy vehicles considering only the …

    ottawa-retro Repository record for Effects of extreme gravity and seismic loads on short to medium span slab-on-girder steel highway bridges. (opens in a new tab)

  10. Structural Condition Assessment Of Prestressed Concrete Transit Guideways

    … The structural system is composed of six-span continuous prestressed concrete bridge segments. The overall transit system incorporates a number of continuous bridges which share common design details, geometries, and loading conditions. The original analysis is based on certain simplifying …

    ucf Repository record for Structural Condition Assessment Of Prestressed Concrete Transit Guideways (opens in a new tab)

  11. Assessment of critical parameters that affect the seismic performance of bridge steel pedestals

    … has been installing steel pedestals on bridges, ranging in height up to 33½” (0.85m) to increase the vertical clearance of many multi-span simply-supported and multi-span continuous bridges in Georgia. But there is a concern about the performance of these steel pedestals as they are …

    tamu Repository record for Assessment of critical parameters that affect the seismic performance of bridge steel pedestals (opens in a new tab)

  12. Effect of Increasing Truck Weight on Bridges

    … this study assessing the force effect that bridges experience when travelled by vehicles with a 97,000-lb gross vehicle weight (GVW). The maximum internal shear and moment caused by two proposed trucks (97-S and 97-TRB) are compared to effects from three base models: design live loadings …

    uab Repository record for Effect of Increasing Truck Weight on Bridges (opens in a new tab)

  13. The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels

    … deck replacement project for a rural three span continuous steel girder bridge in Virginia. Two cast-in-place and four post-tensioned joints were designed and tested in cyclical loading. Each joint was tested on a full scale two girder setup in negative bending with a simulated HS-20 vehicle. The …

    vt Repository record for The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels (opens in a new tab)

  14. Fracture analysis of bridges by spline finite strip method

    … for the fracture analysis of box girder bridges. Several case studies have demonstrated the satisfactory convergence of the proposed method. The fracture analysis of different types of bridges have been successfully conducted using these crack strips. In Chapter 3, the basic model of the …

    ottawa-retro Repository record for Fracture analysis of bridges by spline finite strip method (opens in a new tab)

  15. Recommendations for Longitudinal Post-Tensioning in Full-Depth Precast Concrete Bridge Deck Panels

    … in precast deck panels invalid for all bridges with differing girder types, sizes, spacings, and span lengths. Therefore, the development of guidelines for levels of post-tensioning applicable to a variety of bridge types is necessary so designers may easily implement precast concrete …

    vt Repository record for Recommendations for Longitudinal Post-Tensioning in Full-Depth Precast Concrete Bridge Deck Panels (opens in a new tab)

  16. Design of Continuous Composite Road Bridges - Bridge girders with corrugated webs in stainless steel

    Continuous steel/concrete composite bridges are a commonly used bridge solution normally designed with steel girders with flat webs in carbon steel. Carbon steel is susceptible to corrosion and demands repeated maintenance. By using stainless steel instead, the maintenance can be reduced. Due to …

    chalmers Repository record for Design of Continuous Composite Road Bridges - Bridge girders with corrugated webs in stainless steel (opens in a new tab)

  17. Experimental and Analytical Investigation of Continuity Diaphragms in Continuous Precast Prestressed Concrete Bridges

    Continuous bridges provide several structural and operational advantages over simply supported bridges. On the other hand, designing continuous concrete bridges can be complex due to the construction sequence and the time-dependent nature of materials. These challenges arise because the statical …

    vt Repository record for Experimental and Analytical Investigation of Continuity Diaphragms in Continuous Precast Prestressed Concrete Bridges (opens in a new tab)

  18. Evaluation of performance and maximum length of continuous decks in simple-span bridges

    … was to evaluate the performance history of continuous bridge decks in the State of Georgia, to determine why the current design detail works, to recommend a new design detail if necessary, and to recommend the maximum and/or optimum lengths of continuous bridge decks. The continuous bridge …

    gatech Repository record for Evaluation of performance and maximum length of continuous decks in simple-span bridges (opens in a new tab)

  19. Continuity of bridges composed of simple-span precast prestressed concrete girders made continuous

    Bridges composed of simple-span, precast, prestressed concrete girders made continuous via cast-in-place decks and diaphragms are continuous only for live loads and superimposed dead loads. The continuity diaphragms often crack due to time dependent effects in the girders. These cracks not only …

    njit Repository record for Continuity of bridges composed of simple-span precast prestressed concrete girders made continuous (opens in a new tab)