Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Control Volume Analysis"”.

  1. A Study of the Reattachment of A Turbulent Supersonic Shear Layer With the Closure Condition Provided by A Control Volume Analysis

    Made available in DSpace on 2014-12-10T22:48:13Z (GMT). No. of bitstreams: 1 7212174.pdf: 3024763 bytes, checksum: b687fff5d3e846bcd81a0beda969f446 (MD5) Previous issue date: 1971

    uiuc Repository record for A Study of the Reattachment of A Turbulent Supersonic Shear Layer With the Closure Condition Provided by A Control Volume Analysis (opens in a new tab)

  2. Thermodynamic Scaling of Supersonic Retropropulsion Flowfeilds

    … ratio of specific heats derived from control volume analysis were found to scale the mass flow rate ratio and collapse the current dataset equally well for our data. Mach number ratio was also used to collapse the data but was not explicitly supported from the same control volume …

    washington Repository record for Thermodynamic Scaling of Supersonic Retropropulsion Flowfeilds (opens in a new tab)

  3. Magnetorheological fluid dynamics for high speed energy absorbers

    Fluids with a controllable yield stress allow rapid variations in viscous force in response to an externally applied field. These fluids are used in adaptive energy dissipating devices, which have a controllable force response, reducing shock and vibration loads on occupants and structures. This …

    maryland Repository record for Magnetorheological fluid dynamics for high speed energy absorbers (opens in a new tab)

  4. A study of incompressible material transport using an annular ejector

    … order to establish a theoretical model, a simple control volume analysis was applied to the system. A value for the wall drag coefficient was determined that caused the control volume analysis to agree with the experimental results under conditions of no secondary flow. Secondary flow was not …

    ut-knoxville Repository record for A study of incompressible material transport using an annular ejector (opens in a new tab)

  5. Energy Partition and Heating Mechanisms in Asymmetric Antiparallel Magnetic Reconnection

    … al., 2014. doi: 10.1063/1.4904203) performed a control volume analysis to quantify the energy partition in symmetric or asymmetric reconnection, and found qualitative consistency between the empirical findings and numerical data for electrons during symmetric reconnection using two-dimensional …

    wvu Repository record for Energy Partition and Heating Mechanisms in Asymmetric Antiparallel Magnetic Reconnection (opens in a new tab)

  6. Shear Effects on Buoyancy-Generated Turbulence and Salt Fingers

    … detected. Eddy diffusivities are estimated from control volume analysis and oceanographic microstructure methods.

    uiuc Repository record for Shear Effects on Buoyancy-Generated Turbulence and Salt Fingers (opens in a new tab)

  7. Experimental determination of blade forces in a cross-flow turbine

    … agree reasonably well with the results of a control volume analysis. Two figures are provided, by which the designer may determine the tangential and radial forces for any geometrically similar machine.

    vt Repository record for Experimental determination of blade forces in a cross-flow turbine (opens in a new tab)

  8. Pressure recovery in test facility diffusers : an engineering analysis including the effects of afterburning heat release, aerodynamic blockage, and duct expansion

    … duct performance. In this thesis, a simple control-volume analysis of engine test facility diffuser performance has been embodied in a computer program to predict basic flow conditions such as diffuser exit Mach number, temperature, and pressure, subject to such effects as heat release from …

    ut-knoxville Repository record for Pressure recovery in test facility diffusers : an engineering analysis including the effects of afterburning heat release, aerodynamic blockage, and duct expansion (opens in a new tab)

  9. Assessment and Analysis of a Novel Intake for a Ramjet Engine

    … of a ramjet engine coupled with the intake. A control-volume analysis is used to develop a means of predicting the performance of an AIS coupled ramjet engine given a set of input conditions, to better understand the influence of the controlled variables. This control volume (CV) analysis is …

    calgary Repository record for Assessment and Analysis of a Novel Intake for a Ramjet Engine (opens in a new tab)

  10. Augmenting Energy Capture in Low Energy Density Flows

    … study. Using the data to verify and inform a control volume analysis, an investigation will be done on the SCD to quantify fluid effects as a function of varied geometry.

    bucknell Repository record for Augmenting Energy Capture in Low Energy Density Flows (opens in a new tab)

  11. Flow-Driven Soft Robots: Theoretical, Computational and Experimental Investigations

    … theory, with flow dynamics incorporated through control volume analysis. The study also includes fluid-structure interaction simulations based on a hyperelastic material model. The Yeoh third-order model, fitted to tensile test data from the silicone material, was employed to replicate the …

    concordia Download PDF for Flow-Driven Soft Robots: Theoretical, Computational and Experimental Investigations (opens in a new tab)

  12. A numerical study of fluid flow around two-dimensional lifting surfaces

    … in the study of lifting surfaces. Bounding box control volume measurements infrequently yield exact conservation of mass or consistent values for lift and drag coefficients. Numerically calculated wakes often differ from experimental data. Quite often, an empirical correction can be applied to …

    nps Repository record for A numerical study of fluid flow around two-dimensional lifting surfaces (opens in a new tab)

  13. Filtered Rayleigh Scattering with an Application to Force Component Decomposition

    … bypass forces, as well as thrust and drag, using control volume analysis, specifically the extended parallel expanded streamtube method developed in this work. However, post-processing raw FRS data into usable data and defining the control volume can be challenging. The post-processing scheme uses …

    vt Repository record for Filtered Rayleigh Scattering with an Application to Force Component Decomposition (opens in a new tab)

  14. The Fluid Dynamics of Mayfly Naiads

    … for the hinge development. Two metrics based on control volume analysis are proposed to quantify the performance of each numerical case. The first metric is simply the mechanical efficiency of the energy transfer from the moving gills to the surrounding flow field while the second incorporates …

    maryland Repository record for The Fluid Dynamics of Mayfly Naiads (opens in a new tab)

  15. Turbulent swirling flow in short cylindrical chambers

    … The model was numerically solved, using the control-volume analysis, to provide insight on swirl decay in engines. The model validation was based on experimental observations. Turbulence parameters were represented by a two-equation turbulence model, modified for streamline curvature effects. …

    ubc Repository record for Turbulent swirling flow in short cylindrical chambers (opens in a new tab) Download PDF for Turbulent swirling flow in short cylindrical chambers (opens in a new tab)

  16. Robustness Analysis For Turbomachinery Stall Flutter

    … to parametric uncertainties through the Mu analysis. The nominal flutter model is adopted from [9]. This model was derived by matching a two dimensional incompressible flow field across the flexible rotor and the rigid stator. The aerodynamic load on the blade is derived via the control …

    ucf Repository record for Robustness Analysis For Turbomachinery Stall Flutter (opens in a new tab)

  17. Fabrication and characterization of a polydimethylsiloxane microfluidic pump for direct-sampling neuroscience experiments, with in-line capillary electrophoresis - laser-induced fluorescence chemical analysis

    … - laser-induced fluorescence (CE-LIF) chemical analysis. The micropump was fabricated in-part using replica molding (REM) and injection molding. The micropump channel was formed by bonding an open PDMS Gaussianshaped micromolded channel, to a featureless slab of PDMS. Two pieces of capillary …

    umn Repository record for Fabrication and characterization of a polydimethylsiloxane microfluidic pump for direct-sampling neuroscience experiments, with in-line capillary electrophoresis - laser-induced fluorescence chemical analysis (opens in a new tab)

  18. Temperature Transient Analysis for Reservoir Characterization

    … transform, Method of Characteristics, and control volume analysis. Our results of the analytical models are benchmarked with those from commercial numerical simulation software. Multiple possible scenarios of conventional reservoirs are addressed including single-layer reservoir, …

    lsu-thes Repository record for Temperature Transient Analysis for Reservoir Characterization (opens in a new tab)

Page 1 of 2