Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Controlled Rocking"”.

  1. DEVELOPMENT OF CONTROLLED ROCKING REINFORCED MASONRY WALLS

    … the loss of operation and service shutdown. In controlled rocking systems, an elastic gap opening mechanism (i.e., rocking joint) replaces the typical yielding of the main reinforcement in conventional fixed-base walls, hence reducing wall lateral stiffness without excessive yielding damage. …

    mcmaster Repository record for DEVELOPMENT OF CONTROLLED ROCKING REINFORCED MASONRY WALLS (opens in a new tab)

  2. Ultimate Limit States in Controlled Rocking Steel Braced Frames

    … damage to buildings in seismically active areas, controlled rocking steel braced frames have been developed as a seismically resilient low-damage lateral-force resisting system. Controlled rocking steel braced frames (CRSBFs) mitigate structural damage during earthquakes through a controlled …

    mcmaster Repository record for Ultimate Limit States in Controlled Rocking Steel Braced Frames (opens in a new tab)

  3. Experimental Investigation of Controlled Rocking Cross-Laminated Timber Walls

    Controlled rocking timber walls are being developed to resist earthquake loads without major structural damage. These systems respond to seismic loading through partial uplift from the foundation, dissipating energy through rocking impact and supplemental energy dissipation elements. Initial …

    mcmaster Repository record for Experimental Investigation of Controlled Rocking Cross-Laminated Timber Walls (opens in a new tab)

  4. Equivalent energy based design procedure for controlled rocking-concentrically braced frames

    … functional immediately after the earthquake. Controlled rocking-concentrically braced frame (CR-CBF) is one such novel system developed to achieve higher performance. CR-CBF relies on the use of post-tensioning (PT) tendons and supplemental damping devices (ED), to create a controlled-rocking …

    ubc Repository record for Equivalent energy based design procedure for controlled rocking-concentrically braced frames (opens in a new tab) Download PDF for Equivalent energy based design procedure for controlled rocking-concentrically braced frames (opens in a new tab)

  5. Design of Controlled Rocking Steel Frames to Limit Higher Mode Effects

    … avoid structural damage. One such system is a controlled rocking steel frame, which is the subject of this thesis. In a controlled rocking steel frame, the columns of a frame are permitted to uplift from the foundation, and the response is controlled by using a combination of post-tensioning …

    toronto-retro Repository record for Design of Controlled Rocking Steel Frames to Limit Higher Mode Effects (opens in a new tab)

  6. NONSTRUCTURAL COMPONENT DEMANDS IN BUILDINGS WITH CONTROLLED ROCKING STEEL BRACED FRAMES

    Controlled Rocking Steel Braced Frames (CRSBFs) have been developed as a high-performance structural solution to resist seismic forces, due to their ability to minimize structural damage and self-centre the structure back to its original position after an earthquake. A CRSBF is intentionally …

    mcmaster Repository record for NONSTRUCTURAL COMPONENT DEMANDS IN BUILDINGS WITH CONTROLLED ROCKING STEEL BRACED FRAMES (opens in a new tab)

  7. Development of a simplified method of analysis and design of controlled rocking columns

    … post‑earthquake intervention and downtime. Controlled rocking systems, which incorporate energy‑dissipating connections between the pier cap, column, and footing, offer a promising low‑damage solution but remain difficult to model in practice. Gap opening and closing at the rocking interface …

    ubc Repository record for Development of a simplified method of analysis and design of controlled rocking columns (opens in a new tab) Download PDF for Development of a simplified method of analysis and design of controlled rocking columns (opens in a new tab)

  8. Seismic design and performance evaluation of innovative controlled rocking dual-fused bridge system

    … bridge structural system, named controlled rocking dual fused bridge (CRDFB) system is proposed. The CRDFB system is designed to improve the seismic performance of bridges through the use of replaceable lead extrusion dampers at the base of the rocking piers. The CRDFB system is …

    ubc Repository record for Seismic design and performance evaluation of innovative controlled rocking dual-fused bridge system (opens in a new tab) Download PDF for Seismic design and performance evaluation of innovative controlled rocking dual-fused bridge system (opens in a new tab)

  9. Development of an Axial Yielding Energy Dissipation Device for Controlled Rocking Masonry Walls

    … One researched solution is by allowing controlled rocking of a masonry wall. A controlled rocking masonry wall uses its own gravity load along with a yielding energy dissipating device as a restoring force to return the wall to its original vertical alignment. Through iteration, a new …

    mcmaster Repository record for Development of an Axial Yielding Energy Dissipation Device for Controlled Rocking Masonry Walls (opens in a new tab)

  10. Development of a Flexural Yielding Energy Dissipation Device for Controlled Rocking Masonry Walls

    … seismic force resisting systems, including controlled rocking masonry walls. In controlled rocking masonry walls, uplift of the wall from the foundation is allowed in a way that can localize damage and minimize post-earthquake residual drifts. However, along with other modes of failure, …

    mcmaster Repository record for Development of a Flexural Yielding Energy Dissipation Device for Controlled Rocking Masonry Walls (opens in a new tab)

  11. Design of Controlled Rocking Heavy Timber Walls For Low-To-Moderate Seismic Hazard Regions

    The controlled rocking heavy timber wall (CRHTW) is a high-performance structural solution that was first developed in New Zealand, mainly considering Laminated Veneer Lumber (LVL), to resist high seismic loads without sustaining structural damage. The wall responds in bending and shear to small …

    mcmaster Repository record for Design of Controlled Rocking Heavy Timber Walls For Low-To-Moderate Seismic Hazard Regions (opens in a new tab)

  12. Large-Scale Cyclic and Hybrid Simulation Testing and Development of a Controlled-Rocking Steel Building System with Replaceable Fuses

    … if not financially unreasonable to repair. A controlled rocking system has been developed which virtually eliminates residual drifts and concentrates the majority of structural damage in replaceable fuse elements. The controlled rocking system for steel-framed buildings consists of three major …

    uiuc Repository record for Large-Scale Cyclic and Hybrid Simulation Testing and Development of a Controlled-Rocking Steel Building System with Replaceable Fuses (opens in a new tab)

  13. DEVELOPMENT OF A NOVEL SEISMIC FORCE RESISTING SYSTEM: CONTROLLED ROCKING MASONRY WALLS WITH ENERGY DISSIPATION ACCESSIBLE CONSTRUCTED ATOP A STEEL BASE

    … a seismic event, and in some cases demolition. Controlled rocking systems have been garnering considerable attention as a design approach that can mitigate these shortcomings. In a controlled rocking wall system, the wall is permitted to uplift from the foundation, reducing the lateral stiffness …

    mcmaster Repository record for DEVELOPMENT OF A NOVEL SEISMIC FORCE RESISTING SYSTEM: CONTROLLED ROCKING MASONRY WALLS WITH ENERGY DISSIPATION ACCESSIBLE CONSTRUCTED ATOP A STEEL BASE (opens in a new tab)

  14. The mechanics of rocking structures subjected to ground motion

    … Previous studies have demonstrated that rocking motion can mitigate undesirable seismic actions on structures, and this has been further confirmed through extensive numerical time integration analyses in the present study. Despite the intuitive nature of rocking motion, it has been shown …

    auckland-ms Repository record for The mechanics of rocking structures subjected to ground motion (opens in a new tab)

  15. Dynamic decay of motion of rocking concrete members

    … aiming at understanding the dynamics of precast rocking concrete members. The characteristics and energy dissipation associated with the dynamic response of these systems were investigated.</p> <p>The simple rocking model broadly used by the previous and current research society and a finite …

    iastate Repository record for Dynamic decay of motion of rocking concrete members (opens in a new tab)

  16. SYSTEM-LEVEL INTERACTIONS BETWEEN ROCKING WALLS AND HOLLOW-CORE SLABS

    … to the service shutdown for structural repairs. Controlled rocking masonry walls have been developed as a solution to prevent structural damage when seismic events take place. These systems purposely allow the wall to rock from its foundation and have an uplift at the base, thus replacing the …

    mcmaster Repository record for SYSTEM-LEVEL INTERACTIONS BETWEEN ROCKING WALLS AND HOLLOW-CORE SLABS (opens in a new tab)

  17. Seismic performance of controlled outrigger rocking wall system with different types of energy dissipation devices

    Controlled Outrigger Rocking Wall (CORW) system is a novel earthquake resilient system which combines reinforced concrete wall with controlled rocking base hinge and outrigger system. At the end of the rocking base and the outrigger, different dampers are used to provide the supplemental energy …

    ubc Repository record for Seismic performance of controlled outrigger rocking wall system with different types of energy dissipation devices (opens in a new tab) Download PDF for Seismic performance of controlled outrigger rocking wall system with different types of energy dissipation devices (opens in a new tab)

  18. Experimental study of shape memory alloy connection in precast concrete shear walls for seismic applications

    … One way to enhance ductility is by allowing controlled rocking at the wall-to-foundation connection using unbonded Post-tensioning (PT) tendons and mild steel rebars as energy dissipators in PC shear wall buildings. However, this jointed connection system is complex to build and …

    ubc Repository record for Experimental study of shape memory alloy connection in precast concrete shear walls for seismic applications (opens in a new tab) Download PDF for Experimental study of shape memory alloy connection in precast concrete shear walls for seismic applications (opens in a new tab)

  19. Development of an innovative earthquake-resilient reinforced concrete core wall system

    … reinforced concrete core wall system, named the controlled rocking outrigger core wall (CROCW). In the CROCW system, along one principal axis is a controlled outriggered rocking wall (CORW), where an outrigger is situated at the roof and the base is designed to rock. Dampers are incorporated …

    ubc Repository record for Development of an innovative earthquake-resilient reinforced concrete core wall system (opens in a new tab) Download PDF for Development of an innovative earthquake-resilient reinforced concrete core wall system (opens in a new tab)

  20. SEISMIC DESIGN AND BEHAVIOUR OF PRECAST CONCRETE CONNECTIONS FOR ACCELERATED BRIDGE CONSTRUCTION

    … to non-emulative systems, which incorporate controlled rocking for minimized damage. This thesis examines one representative connection from each category: member socket connections (MSC), referred to as MSC piers (emulative), and segmental post-tensioned precast concrete (SPPC) piers …

    mcmaster Repository record for SEISMIC DESIGN AND BEHAVIOUR OF PRECAST CONCRETE CONNECTIONS FOR ACCELERATED BRIDGE CONSTRUCTION (opens in a new tab)

Page 1 of 2