Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Controlled voltage source"”.
-
Development and analysis of multifunctional inverters in microgrids with high penetration of power-electronics loads
… the integration of Distributed Energy Resources (DERs) into microgrids. The central research is anchored in two key observations: the increasing penetration of distributed renewable energy sources and the pervasive use of nonlinear loads. These phenomena have led to significant power …
-
Inferring LTI Dynamics of Inverter Based Resources in Isolated and Networked Scenarios
… networks. First, a model of a GFM as a current-controlled voltage source is examined. The nonlinear power dynamics are analytically linearized and the behavior is compared to the original nonlinear model. Second, the power and frequency outputs of a more complex GFM model are fed into system …
-
Analysis and Mitigation of Impacts of Plug-In Electric Vehicles on Distribution System During Faults
… Level-2 battery charging system with current controlled and voltage controlled Voltage Source Converter (VSC) is modeled in PSCAD/EMTDC. A car park, with sixteen PEVs, each rated for 6.6 kW, is connected on each of the three phases, at one of the buses in the system. Temporary single line to …
-
Maximum power tracking control scheme for wind generator systems
… rectifier, a dc/dc boost converter, a current controlled voltage source inverter, and a microcontroller that commands the dc/dc converter to control the generator for maximum power extraction. The microcontroller will also be able to control the current output of the three-phase inverter. In …
-
Variable structure virtual impedance approaches for improving power flow control of grid-connected power converters
… have enabled the insertion of renewable energy sources (e.g. photovoltaic and wind systems) as distributed generators (DG), in the electrical grid. However, because of the intermittent nature of the energy in solar radiation and wind, control strategies for regulating the DG power flow are …
-
Energy Management Control for Multimode Microgrid Renewable Integration
… the need for renewable and distributed energy resources. Designing a storage unit system which complements the distributed generation is required for increased efficiency and reducing the burden on the utility grid. The energy storage model used in this thesis is the Li-ion battery which is …
-
Sensorless Speed Control of Permanent Magnet-Assisted Synchronous Reluctance Motor (PMa-SynRM)
… The machine is supplied by a current controlled voltage source PWM inverter to control the instantaneous stator currents which are decided by the reference speed. Secondly, the thesis focuses on the sensorless speed operation of the PMa-SynRM to take advantage of the lower costs as …
-
A Stator Turn Fault Detection Method and a Fault-Tolerant Operating Strategy for Interior PM Synchronous Motor Drives in Safety-Critical Applications
… is shown that a stator turn fault in a current-controlled voltage source inverter-driven machine leads to a reduced fundamental positive sequence component of the voltage references as compared to the machine without a turn fault for a given torque reference and rotating speed. Based on this …
-
Design of a Power Electronics Based Diesel Engine Generator Emulator for Study of Microgrid Related Applications
… dSpace) and the model is fed to a current and voltage controlled voltage source inverter (VSI) which is designed for the emulation of the generator output voltage to produce the same output power characteristics as in a real diesel engine generator. Output available power of a second source …
-
Analytical Investigation on the Impact of DC Series Arc Fault on Boost Converter
… protection of such system becomes crucial. DC voltage and current don’t have repetitive zero crossings like in the AC system when the fault occurs. This makes difficult in the detection and localizing of these dc arc faults. If not detected and extinguished in time, arc faults cause fire …
-
AC/DC power conversion schemes with unity power factor and minimum harmonic distortion
… power converter applications the ac mains voltage is first rectified into a dc voltage or current, which is subsequently converted into voltages and currents of appropriate amplitude, frequency and shape to meet the load requirements. The front-end rectifier must satisfy three main …
-
Design and implementation of three-phase inverters using a TMS320F2812 digital signal processor
… was to design and build a three-phase inverter controlled by the TMS320F2812 DSP by Texas Instruments. The TMS320F2812 is controlled in order to make inverters generate output waveforms which mimic the main reference signal coming from a computer. The project included building three different …
-
Phase advance modulation of low-cost power electronic converters for SPM wind turbine generators.
… switched-mode rectifier (SMR) into a DC voltage load. Conventional control of a semi-bridge SMR results in lower output power than an inverter (i.e. fully-controlled voltage source rectifier) due to the SMR’s inability to control its input power factor. Phase-advance modulation was …
-
Simulink® Based Design and Implementation of a Solar Power Based Mobile Charger
… on both to increase the use of renewable energy sources and to use the available energy with more efficiency. Among these sources, solar energy is being considered as the most abundant and has received high attention. The mobile phone has become one of the basic needs of modern life, with almost …