Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 101 for “"Converter System"”.

  1. DC Bus Stabilization and Dynamic Performance Improvement of a Multi-Converter System

    … a variety of applications, moving traditional AC systems to more efficient and reliable DC systems. Some examples are shipboard power distribution systems, DC microgrids, electric vehicles and more electric aircrafts. Even though these types of systems offer significant advantages that make them …

    south-carolina Repository record for DC Bus Stabilization and Dynamic Performance Improvement of a Multi-Converter System (opens in a new tab)

  2. Model, Design, and Control for Power Conversion in Wave Energy Converter System

    … in energy harvesting, but due to its high system cost per electricity production, it is still in the pre-commercialization stage for grid connection. A wave energy converter (WEC) system that harvests energy through wave motion consists of a wave energy converter and a power take-off (PTO). …

    vt Repository record for Model, Design, and Control for Power Conversion in Wave Energy Converter System (opens in a new tab)

  3. High Speed Hydraulic Valve Power Consumption In A Switched Inertance Hydraulic Converter System

    Hydraulic systems are ubiquitous in many industrial applications due to their high power density, precise control, and durability. Not all applications warrant expensive and complicated high efficiency technologies. Instead, many basic systems use a fixed displacement pump with a restrictive …

    sask Repository record for High Speed Hydraulic Valve Power Consumption In A Switched Inertance Hydraulic Converter System (opens in a new tab)

  4. Studies on a performance enhanced dc-hfac-ac converter system for ac motor drive

    … non-resonant link power conversion system where the input dc is converted to high frequency single-phase ac (20-50 kHz) through a high frequency inverter. Then, this is converted to variable frequency three-phase ac voltage by a hfac-ac matrix converter for driving an induction motor …

    ut-knoxville Repository record for Studies on a performance enhanced dc-hfac-ac converter system for ac motor drive (opens in a new tab)

  5. A new DSP controlled bi-directional DC/DC converter system for inverter/charger applications

    … practical implementation of DSP controlled power converters. This work is concerned with the application of current DSP hardware technology within a novel power electronic voltage converter system for combination inverter/chargers. Power circuit design, dynamic modeling, digital control and large …

    ubc Repository record for A new DSP controlled bi-directional DC/DC converter system for inverter/charger applications (opens in a new tab) Download PDF for A new DSP controlled bi-directional DC/DC converter system for inverter/charger applications (opens in a new tab)

  6. Integrated PV and multilevel converter system for maximum power generation under partial shading conditions

    … from the basic P&O algorithm. Experimental systems of five and seven level DC-link inverters with a DC-DC buck converter system have been implemented. The digital processing unit eZdspTM F28335 is used to control the PV systems in real time, and Matlab-Simulink Real Time Data Exchange (RTDX) …

    whiterose Download PDF for Integrated PV and multilevel converter system for maximum power generation under partial shading conditions (opens in a new tab)

  7. Distributed DC/DC converter system - Maintaining voltage stability and efficiency optimization while regulating several converters

    … supplying the low voltage side with a multilevel converter (MLC). A control strategy was tested that is based on distributing different set voltages to each converter. The system was meant to regulate itself with no other information other than the input voltage and output voltage. The system …

    chalmers Repository record for Distributed DC/DC converter system - Maintaining voltage stability and efficiency optimization while regulating several converters (opens in a new tab)

  8. Online Identification, Monitoring, and Control of A Dc/Dc Converter System Using Digital Network Analyzer Techniques

    … enabled all-digital control of switching power converters for a wide range of applications including multi-converter power distribution systems. These systems are prone to interactions that can reduce stability and performance margins according to the so-called Middlebrook impedance criterion …

    south-carolina Repository record for Online Identification, Monitoring, and Control of A Dc/Dc Converter System Using Digital Network Analyzer Techniques (opens in a new tab)

  9. Towards High Efficiency and High Power Density Converter: System Level Design, Modulation, and Active EMI Filters

    Power converter exposes strong challenges to its efficiency, power density and reliability. For the grid-connected inverter application, three-level (3-L) T-type neutral-point-clamped (TNPC) inverters has higher efficiency and lower total harmonic distortion (THD) compared to two-level inverter. …

    arkansas Repository record for Towards High Efficiency and High Power Density Converter: System Level Design, Modulation, and Active EMI Filters (opens in a new tab)

  10. Development of a current to pressure (I/P) converter. System analysis of a current to pressure (I/P) converter through physical modelling and experimental investigation, leading to a design for improved linearity and temperature independence.

    Current-to-pressure (I/P) converters are pneumatic devices which provide precise control of pressure in various industries – for example these devices are often used in valve positioner systems (typically found in the oil and gas industry) and tensioning systems (typically used in the packaging …

    bradford Repository record for Development of a current to pressure (I/P) converter. System analysis of a current to pressure (I/P) converter through physical modelling and experimental investigation, leading to a design for improved linearity and temperature independence. (opens in a new tab)

  11. Simulation of transient phenomena in high voltage direct-current converter systems

    … phenomena in high voltage direct-current systems are developed. The new converter model is versatile and the solution algorithm is free from numerical oscillations. A new generic inverter control described in this thesis is based on a predictive approach. Steady-state and transient …

    ubc Repository record for Simulation of transient phenomena in high voltage direct-current converter systems (opens in a new tab) Download PDF for Simulation of transient phenomena in high voltage direct-current converter systems (opens in a new tab)

  12. Dynamic State Estimation Based Protection of Power Electronics Systems

    Power electronics systems play an important role in modern power systems to realize sustainable generation and flexible transmission. Reliable protection of the power electronics systems is a core issue in reliable power system operation. The complex structure and diverse fault characteristics make …

    gatech Repository record for Dynamic State Estimation Based Protection of Power Electronics Systems (opens in a new tab)

  13. High Performance Power Converter Systems for Nonlinear and Unbalanced Load/Source

    … and/or nonlinear situations in power electronic systems, namely power converter level, power converter system level, and large-scale power electronics system level. At power converter level, after review of traditional PWM methods, especially two-dimensional space vector modulation schemes, …

    vt Repository record for High Performance Power Converter Systems for Nonlinear and Unbalanced Load/Source (opens in a new tab)

  14. Digital control loop for power converter systems

    … used in various applications of switchmode power converter systems because of its advantages over analog control. The disadvantages, however, include limited signal resolution due to finite word length of processor and A/D converter; sampling time delay and limited computation power and control …

    ubc Repository record for Digital control loop for power converter systems (opens in a new tab) Download PDF for Digital control loop for power converter systems (opens in a new tab)

  15. Design considerations for DC-DC converters in fuel cell systems

    … from no load to full load, a power electronics converter is required to interface the fuel cell with its loads. This dissertation focuses on developing a set of considerations that will assist designers of the power electronics converter in the design and optimization of the system. These design …

    tamu Repository record for Design considerations for DC-DC converters in fuel cell systems (opens in a new tab)

  16. Optical Density Formation in Track-Etch Radiography (Part A)

    … of maximizing optical contrast. A central converter system with Lithium-6 as the converter and cellulose-nitrate as the recorders is used. It is found that the maximum contrast is achieved by using a clear cellulose-nitrate recorder at least 10 µm thick and a Lithium-6 converter of …

    mcmaster Repository record for Optical Density Formation in Track-Etch Radiography (Part A) (opens in a new tab)

  17. Multiple Input Single Output Converter with Maximum Power Point Tracking for Renewable Energy Applications

    … (MPPT) for multiple input single output (MISO) converter is presented such that power generated from multiple individual energy sources can be combined to deliver the maximum amount of power to a common resistive load. Typically, MISO converters will employ techniques that yield equal current …

    calpoly Repository record for Multiple Input Single Output Converter with Maximum Power Point Tracking for Renewable Energy Applications (opens in a new tab)

  18. Machine Learning Approaches to Improving the Transient Stability of Voltage-Source Converters in Weak Grids

    With the proliferation of converter-interfaced generation in modern power systems, grid-forming converters are viewed as a solution to improve system stability and resilience in weak power grids. However, the dynamic behaviour of the grid-converter systems is strongly influenced by inevitable …

    aalto Repository record for Machine Learning Approaches to Improving the Transient Stability of Voltage-Source Converters in Weak Grids (opens in a new tab)

  19. Modelling and design of planar PCB transformers for high-frequency DC-DC converters

    … planar PCB transformers for high-frequency power converters. A new non-linear model of planar PCB magnetics was developed to model the winding loss, core loss, and saturation characteristics. The developed model can be implemented in a circuit simulation package which can be used to predict the …

    unsw Repository record for Modelling and design of planar PCB transformers for high-frequency DC-DC converters (opens in a new tab)

Page 1 of 6