Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Converter model"”.
-
An improved switching converter model
The nonlinear modeling and analysis of dc-dc converters in the continuous mode and discontinuous mode has been done by averaging and discrete-sampling techniques. The averaging technique is simple to use and averages the output voltage. The discrete technique is very complex and cumbersome, but …
-
Sliding Mode Control of a Nonlinear Wave Energy Converter Model
The most accurate wave energy converter models for heaving point absorbers include nonlinearities, which increase as resonance is achieved to maximize energy capture. The efficiency of wave energy converters can be enhanced by employing a control scheme that accounts for these nonlinearities. This …
-
A converter model for the digital simulation of transients in AC/DC transmission systems
… simulate these phenomena with digital computers, converter stations must be modelled in more detail than as simple dc sources. This thesis discusses the development and implementation of a converter model which enables the converter bridge circuits to be represented in detail and the valve …
-
Dynamic State Estimation Based Protection of Power Electronics Systems
… estimation-based protection (EBP) to protect the converter systems. The first step of the conducted research is developing the converter system models in both the time domain and the quasi-dynamic domain. The time domain converter model is developed with detailed circuits of the semiconductor …
-
Design, improvement, and testing of a thermal-electrical analysis application of a multiple beta-tube AMTEC converter
A new design AMTEC converter model was developed, and its effectiveness as a design tool was evaluated. To develop the model, requirements of the model were defined, several new design models were successively developed, and finally an optimal new design model was developed. The model was created …
-
Catalytic converter thermal model for hybrid electric vehicle engine on/off control strategy development
A 3-dimensional (3-D), thermochemical catalytic converter model was developed to investigate the effects of engine-off periods typical in hybrid electric vehicle (HEV) operation on overall emissions conversion effectiveness. The model includes a 3-reaction mechanism to account for the majority of …
-
Analysis of DC microgrids as stochastic hybrid systems
"A modeling framework for dc microgrids and distribution systems based on the dual active bridge (DAB) topology is presented. The purpose of this framework is to accurately characterize dynamic behavior of multi-converter systems as a function of exogenous load and source inputs. The base model is …
-
Non-linear Dynamic Transformer Modelling and Optimum Control Design of Switched-mode Power Supplies
… the design of isolated and non-isolated DC-to-DC converters in general, and yback converters in particular. Inspired by this possibility, the thesis adopts the first-ever digital control design in the field for wide-operating range yback converters, based on a low-cost microcontroller. Accurate …
-
Simulation of transient phenomena in high voltage direct-current converter systems
In this thesis models for the simulation of transient phenomena in high voltage direct-current systems are developed. The new converter model is versatile and the solution algorithm is free from numerical oscillations. A new generic inverter control described in this thesis is based on a predictive …
-
Modular Multilevel Converter Topology Based on Half-Bridge Submodules Using a Si/SiC Hybrid Approach for Integration of Wind Energy Systems
… and Si IGBT hybrid HBSM structure-based MMC model simplifies the converter model by reducing the required number of switching devices, withstanding high switching frequencies and temperatures, lowering the complexity of the MMC voltage balancing control, and minimizing the total power losses …
-
Controle preditivo com número reduzido de estados aplicado a conversor multinível modular
The modular multilevel converter (MMC) has been a subject of increasing interest for power electronics researchers. Therefore, the use of this topology in the most diverse application areas has been studied, especially in high voltage direct current transmission systems. Thus, this work describes …
-
ONE-DIMENSIONAL HIGH-FIDELITY AND REDUCED-ORDER MODELS FOR THREE-WAY CATALYTIC CONVERTER
… the performance of the three-way catalytic (TWC) converter, advanced control strategies and on-board diagnostics (OBD) systems are needed. Both rely on a relatively accurate but computationally efficient TWC converter model. This thesis aims to develop a control-oriented model that can be employed …
-
ONE-DIMENSIONAL HIGH-FIDELITY AND REDUCED-ORDER MODELS FOR THREE-WAY CATALYTIC CONVERTER
… the performance of the three-way catalytic (TWC) converter, advanced control strategies and onboard diagnostics (OBD) systems are needed. Both rely on a relatively accurate but computationally efficient TWC converter model. This thesis aims to develop a control-oriented model that can be employed …
-
CORRELATED SIMULATION OF PSEUDO TRANSIENT TORQUE CONVERTER CLUTCH ENGAGEMENT USING COUPLED FLUID-STRUCTURE INTERACTION
… Interaction simulation of a two path torque converter to predict the flow field inside the torque converter and the torque capacity of the torque converter clutch during a pseudo transient maneuver of engagement of clutch from SR 0.81 to 0.99. The pressure data of the CFD simulation is …
-
Optimization of a Three-Way Catalytic Converter Through Engine Test-Bench Experiments
A three-way catalytic converter model designed in a preceding thesis has been refined and translated from SIMULINK into a script-based MATLAB model, to produce faster, more stable and accurate solutions for the ordinary differential equations (ODE). The model consists of nine ODE’s and are solved …
-
Observer based fault detection in DC-DC power converters
… This testbed is comprised of a dc-dc buck converter. The detection filters for monitoring the health of the components in this dc-dc converter, as well as the converter controls, are implemented in a low-cost DSP. Using a lossy converter model which runs in real time on the DSP, the model …
-
Modelling DC backup system with Simpow
… the Oskarshamn Nuclear Power Plant has not been modelled and the main purpose of this work is to model the DC backup system with Simpow software. In this master thesis work a small part of the DC backup system is modelled with Simpow. First the data concerning all the components is gathered from …
-
Reduced-order modeling of power electronics components and systems
… the seemingly inevitable compromise between modeling fidelity and simulation speed in power electronics. Higher-order effects are considered at the component and system levels. Order-reduction techniques are applied to provide insight into accurate, computationally efficient component-level …
-
RTP Compatible: Two Models of Video Streaming Over VANETs
… like RTP servers. Our work proposes two models to solve this compatibility issue. The first model is called the converter model. Based on this model, we first modify RTP using Erasure Coding (EC) technique in order to adapt it to the high packet loss rate of VANETs. This newly developed …
-
Numerically efficient modeling of modular multilevel converter with integrated battery energy storage for high voltage direct current transmission
… efforts from traditional two- or three-level converters to modular multilevel converters. This is due to the flexibility of modular multilevel converters in allowing for the integration of battery energy storage systems within their submodule capacitors. Modular multilevel converters with …
Page 1 of 3