Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 176 for “"Cooling Capacity"”.

  1. Psychrometric Testing Facility Restoration and Cooling Capacity Testing

    … for the purpose of supporting research and cooling capacity testing, with the latter following the appropriate standards. Numerous changes were made to the coolant piping system, the data acquisition system, instrumentation, and temperature and humidity control to update and improve the …

    tamu Repository record for Psychrometric Testing Facility Restoration and Cooling Capacity Testing (opens in a new tab)

  2. Enhancing the cooling capacity of heat pipes : wicking in micropillar arrays and electrowetting-based droplet pumping

    … action to drive fluid circulation. Heat transfer capacity is limited by the maximum fluid velocity the wick can sustain, among other factors. Because viscous pressure losses increase with distance, the maximum heat transfer capacity of a heat pipe decreases over extended distances. This work …

    texas Repository record for Enhancing the cooling capacity of heat pipes : wicking in micropillar arrays and electrowetting-based droplet pumping (opens in a new tab)

  3. An experimental evaluation of the effect of evaporative cooling of condenser air on the performance of an air conditioning system

    <p>The effect of evaporative cooling of condenser air on the performance, specifically cooling capacity and the coefficient of performance of an air conditioning system was determined. The dry bulb temperature of the entering air for an air cod-ed condenser was brought down to near saturated wet …

    njit Repository record for An experimental evaluation of the effect of evaporative cooling of condenser air on the performance of an air conditioning system (opens in a new tab)

  4. Development of an Air-Cycle Environmental Control System for Automotive Applications

    … a minimum while providing the maximum amount of cooling possible and minimizing weight and space requirements. A test stand utilizing shop compressed air was developed to measure component performance. An unmodified automotive turbocharger was tested initially as a baseline in a Reversed‐Brayton …

    calpoly Repository record for Development of an Air-Cycle Environmental Control System for Automotive Applications (opens in a new tab)

  5. UNIVERSAL THERMODYNAMIC MODELLING OF CHILLERS : SPECIAL APPLICATION TO ADSORPTION CHILLERS

    … mechanisms on chiller inefficiency at a given cooling capacity. Applying this framework to vapour compression chiller, this study demonstrates the significant impact of pressure drops and flow-rate throttling on chiller inefficiency and corrects the values of thermal conductance obtained from …

    nus Repository record for UNIVERSAL THERMODYNAMIC MODELLING OF CHILLERS : SPECIAL APPLICATION TO ADSORPTION CHILLERS (opens in a new tab) Download file for UNIVERSAL THERMODYNAMIC MODELLING OF CHILLERS : SPECIAL APPLICATION TO ADSORPTION CHILLERS (opens in a new tab)

  6. PERFORMANCE ANALYSIS OF VAPOUR COMPRESSION CHILLERS

    … in a wide range of commercial and industrial cooling applications. This thesis will study the performance characteristics of both reciprocating and centrifugal chillers from the framework of irreversible thermodynamics. For reciprocating chillers, the author has shown first that the …

    nus Repository record for PERFORMANCE ANALYSIS OF VAPOUR COMPRESSION CHILLERS (opens in a new tab) Download file for PERFORMANCE ANALYSIS OF VAPOUR COMPRESSION CHILLERS (opens in a new tab)

  7. Analysis of Packaged Air Conditioning System for High Temperature Climates

    … As the outdoor temperature increases, both the cooling capacity and coefficient of performance (COP) of ECUs drop dramatically. In addition, the compact design degrades airflow uniformity due to air maldistribution across evaporator coil, which results in further performance degradation. …

    purdue-thes Repository record for Analysis of Packaged Air Conditioning System for High Temperature Climates (opens in a new tab)

  8. DEVELOPMENT OF COOLING SYSTEMS WITH ACTIVE ELASTOCALORIC REGENERATORS

    … and optimized over a century to provide cooling in residential and commercial buildings, and transport systems. However, its usage has resulted in unpredicted environmental damage such as depleting the ozone layer and promoting global warming when its refrigerant leaks into the …

    maryland Repository record for DEVELOPMENT OF COOLING SYSTEMS WITH ACTIVE ELASTOCALORIC REGENERATORS (opens in a new tab)

  9. Second law analysis and the application of the efficient power criterion to a four-temperature-level absorption chiller

    … levels (which are assumed to be of infinite heat capacity in most studies). Heat transfer interactions that occur between the heat reservoirs and the internal components are of high importance to determine the efficiency and cooling capacity of absorption chillers. The purpose of this study is to …

    unm Repository record for Second law analysis and the application of the efficient power criterion to a four-temperature-level absorption chiller (opens in a new tab)

  10. Thermally activated miniaturized cooling system

    … study of a miniaturized thermally activated cooling system was conducted. This study represents the first work to conceptualize, design, fabricate and successfully test a thermally activated cooling system for mobile applications. Thermally activated systems have the ability to produce useful …

    gatech Repository record for Thermally activated miniaturized cooling system (opens in a new tab)

  11. The Effect of Thermal Load Configurations on Passive Chilled Beam Performance

    … CFD model implemented a calculation for the beam cooling capacity to predict the beam performance based on the room thermal conditions. The experimental data revealed an average reduction of 15% in the passive beam cooling capacity for the asymmetrically configured thermal manikins compared to the …

    tamu Repository record for The Effect of Thermal Load Configurations on Passive Chilled Beam Performance (opens in a new tab)

  12. Numerical study of the heat transfer in a miniature Joule-Thomson cooler

    … predicted. The temperature versus entropy, cooling capacity versus load temperature, and cooling capacity versus input pressure charts are plotted and discussed. The conventional way of simulating a Hampson-type J-T cooler, which is accompanied by a host of empirical correction factors, …

    nus Repository record for Numerical study of the heat transfer in a miniature Joule-Thomson cooler (opens in a new tab) Download file for Numerical study of the heat transfer in a miniature Joule-Thomson cooler (opens in a new tab)

  13. Two phase flow distribution in parallel flow heat exchangers -- experimentally verified model

    … model in every case. In order to compare cooling capacity prediction, the mass flow rate in the uniform distribution model was then increased until the exit superheat matched the superheat of the maldistribution model. For every case, the cooling capacity is over predicted by the uniform …

    uiuc Repository record for Two phase flow distribution in parallel flow heat exchangers -- experimentally verified model (opens in a new tab)

  14. Optimization, control, and implementation of CO2 transcritical air conditioning systems

    … mean that the system is working at its highest cooling/heating capacity that might be desired for example in a transient start-up operation to cool down or heat up the car cabin in the shortest possible time. In addition, offline control correlations suffer deviation from the true optimum as …

    msu Repository record for Optimization, control, and implementation of CO2 transcritical air conditioning systems (opens in a new tab)

  15. Thermal Analysis and Experiment Design for Seismic Performance Evaluation of Ice and Water Contaminated Friction Pendulum Bearings

    … kips, calculated using the maximum displacement capacity (11 in.) of Susitna Bridge bearing. A thermal finite volume model was developed to simulate the freezing process of a water-filled bearings placed inside an insulation box filled with dry ice. Two different approaches were used to model dry …

    unr Repository record for Thermal Analysis and Experiment Design for Seismic Performance Evaluation of Ice and Water Contaminated Friction Pendulum Bearings (opens in a new tab)

  16. Personal-portable Cooling Garment Based on Adsorption Vacuum Membrane Evaporative Cooling

    A cutting edge man-portable AVMEC cooling garment was demonstrated to be able to provide sufficient cooling for personnel working at mediate activity loads. Studies were first carried out in a well controlled vacuum desiccator at room temperature to elucidate the effects of several key parameters …

    ottawa-retro Repository record for Personal-portable Cooling Garment Based on Adsorption Vacuum Membrane Evaporative Cooling (opens in a new tab)

  17. An Evaluation of Different Plant Taxa on Wall Thermal Properties

    Hot cities are increasingly seeking nature-based cooling strategies to combat the rising urban temperature. Cooling the constructed environment begins with incorporating the right plants – taxa that hold the power to cool, on or around the buildings in various forms of greeneries such as vegetated …

    whiterose Download PDF for An Evaluation of Different Plant Taxa on Wall Thermal Properties (opens in a new tab)

  18. Modeling and analysis of a Vuilleumier heat pump system

    … could be limited to less than 1% of the total cooling capacity of the system. However, for applications where the heat exchanger size is constrained, additional power ranging from 10% to 300% would need to be supplied depending upon the severity of the constraint. The effects of varying the …

    iastate Repository record for Modeling and analysis of a Vuilleumier heat pump system (opens in a new tab)

  19. Experimental and Analytical Investigation of a Two-Phase Ejector Used for Expansion Work Recovery in a Transcritical R744 Air-Conditioning System

    Although the reduced cooling capacity and coefficient of performance (COP) at elevated outdoor temperatures represent an inherent drawback of the transcritical carbon dioxide (CO2, R744) refrigeration cycle, the supercritical heat rejection pressure can be used to maximize the system performance. …

    uiuc Repository record for Experimental and Analytical Investigation of a Two-Phase Ejector Used for Expansion Work Recovery in a Transcritical R744 Air-Conditioning System (opens in a new tab)

Page 1 of 9