Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 731 for “"Cooling Rate"”.

  1. Cooling rate measurements of glasphalt

    Includes bibliographical references.

    colo-mines Repository record for Cooling rate measurements of glasphalt (opens in a new tab)

  2. Dual-phase microalloyed steels: temperature and cooling rate effects

    Includes bibliographical references (pages 173-175).

    colo-mines Repository record for Dual-phase microalloyed steels: temperature and cooling rate effects (opens in a new tab)

  3. Effect of Cooling Rate on Aluminium-Containing High-Entropy Alloys

    … testing accuracy of 92%. This neural network operates solely on the compositional data of alloys, as opposed to the orthodox approach of using Hume-Rothery (HR) data. Considering that an alloy’s composition is always known for certain (unlike HR features that are dependent on estimates), this …

    whiterose Download PDF for Effect of Cooling Rate on Aluminium-Containing High-Entropy Alloys (opens in a new tab)

  4. Influence of cooling rate on microsegregation behavior of magnesium alloys

    … of paramount importance. The effect of cooling rate on microstructure and microsegregation of three commercially important magnesium alloys was investigated in the current research. Wedge (‘V’ shaped) castings of AZ91D, AM60B and AE44 alloys were made using a water-cooled permanent …

    concordia Download PDF for Influence of cooling rate on microsegregation behavior of magnesium alloys (opens in a new tab)

  5. The Role of Cooling Rate on Microstructure in Sand-Cast Aluminum A205

    … thus microstructure during solidification. Accurate solidification simulations require knowledge of the melt physical properties, mold-filling sequence, mold material properties and subsequent validation by thermal and microstructural measurements. The present work describes the most significant …

    queens Repository record for The Role of Cooling Rate on Microstructure in Sand-Cast Aluminum A205 (opens in a new tab)

  6. Effect of cooling rate on solidification characteristics of aluminum alloys A356 and AA5182

    … modified) and AA5182 were analyzed using cooling curve analysis to determine the evolution in fraction solid. The experiments involved recording the temperature/time data under different cooling rates so that the various phase changes associated with solidification could be identified. …

    ubc Repository record for Effect of cooling rate on solidification characteristics of aluminum alloys A356 and AA5182 (opens in a new tab) Download PDF for Effect of cooling rate on solidification characteristics of aluminum alloys A356 and AA5182 (opens in a new tab)

  7. The Effect of Cooling Rate of Friction Stir Welded High Strength Low Alloy Steel

    … These control methods also affect the HAZ cooling rate by providing greater range (a 60% increase compared to a fixed backing plate) and control (five welds within 16 °C/s). This increased range produced microstructures consisting of various forms of ferrite at lower cooling rates and …

    byu Repository record for The Effect of Cooling Rate of Friction Stir Welded High Strength Low Alloy Steel (opens in a new tab) Download PDF for The Effect of Cooling Rate of Friction Stir Welded High Strength Low Alloy Steel (opens in a new tab)

  8. Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation

    … films were examined as a function of the cooling rate, physical aging, and orientation. Such conditions affect the free volume content and its size and shape distribution. Results obtained from permeation experiments were accompanied with dynamic mechanical and density measurements. The …

    vt Repository record for Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation (opens in a new tab)

  9. Microstructural Evolution as a Function of Cooling Rate in Rapidly Solidified Commercial Grey Cast Iron

    … studied. In this investigation, the effect of cooling rate on rapidly solidified droplets cooled separately in Nitrogen and Helium in a 6.5 m high drop-tube are compared against conventionally solidified as-cast alloy. Powder sample sizes obtained ranges from ≥ 850 µm to ≤ 38 µm in diameter …

    whiterose Download PDF for Microstructural Evolution as a Function of Cooling Rate in Rapidly Solidified Commercial Grey Cast Iron (opens in a new tab)

  10. The post-mortem interval: a study of the body cooling rate and steroid degradation after death

    … special emphasis being placed on the post-mortem rate of cooling because this method is commonly used for estimating the interval after death. Theories and models of the post-mortem loss of heat from the human body are summarised and discussed. The Microwave Thermography System, a new device which …

    glasgow Download PDF for The post-mortem interval: a study of the body cooling rate and steroid degradation after death (opens in a new tab)

  11. Effects of silicon content and cooling rate on mechanical properties of heavy section ductile cast iron

    The effects of Si and cooling rate are investigated for their effect on the mechanical properties and microstructure. Three alloys were chosen with varying C and Si contents and an attempt to keep the remainder of the elements present constant. Within each heat, three test blocks were poured. Two …

    mtu Repository record for Effects of silicon content and cooling rate on mechanical properties of heavy section ductile cast iron (opens in a new tab)

  12. An Experimental Investigation of the Relation Between the Cooling Rate and Welding Variables in Fusion Welding

    In the field of welding metallurgy, much attention is given to the effects which the welding arc or flame will have on the structure and properties of the metals being joined. The engineer is interested in the intensity and extent of physical changes brought about by the unavoidable "heat …

    byu Repository record for An Experimental Investigation of the Relation Between the Cooling Rate and Welding Variables in Fusion Welding (opens in a new tab) Download PDF for An Experimental Investigation of the Relation Between the Cooling Rate and Welding Variables in Fusion Welding (opens in a new tab)

  13. Influence of alloy level, retained strain, and post-rolling cooling rate on microstructure development in hot-rolled steels

    … controlled processing (TMCP) coupled with accelerated cooling has been shown to produce high quality as-rolled plate and reduce costs. Judicious alloying with Nb and Mo can provide strengthening through grain refinement and transformation strengthening, while maintaining toughness. It is …

    colo-mines Repository record for Influence of alloy level, retained strain, and post-rolling cooling rate on microstructure development in hot-rolled steels (opens in a new tab)

  14. Influence of cooling rate on microstructure and properties in low-temperature tempered medium-carbon low-alloy martensitic steels

    … regarding the effect of alloying additions and cooling rate on properties. Large section sizes may lead to significant differences in cooling rate throughout the component during processing causing both hardenability and autotempering to be of relevance. The effect of autotempering (tempering of …

    colo-mines Repository record for Influence of cooling rate on microstructure and properties in low-temperature tempered medium-carbon low-alloy martensitic steels (opens in a new tab)

  15. Temperature, Cooling Rate and Hydration Dependence of Protein Conformational Ensembles and Radiation Damage in Biomolecular X-ray Crystallography

    … experimental knobs. We present temperature, cooling rate and relative humidity dependence of protein structures which, when put together, offers a much more complete picture of protein structure, dynamics and function. We also quantify radiation damage to protein samples at cryogenic …

    cornell Repository record for Temperature, Cooling Rate and Hydration Dependence of Protein Conformational Ensembles and Radiation Damage in Biomolecular X-ray Crystallography (opens in a new tab)

  16. Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates

    The effect of cooling rate and stacking sequence on fatigue behavior was analyzed for notched quasi-isotropic APC-2 laminates. The fatigue behavior of fast (475° F/min) and slow (1° F/min) cooled specimens of the following two layups was studied: Layup A of (-45/0/45/90), and Layup B of …

    vt Repository record for Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates (opens in a new tab)

Page 1 of 37