Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"Cooling of electronics"”.

  1. A piezoelectric translational flow agitator for active air cooling of electronics.

    … increases due to the rapid development of integrated circuits with micro-nano fabrication, the need increases for powerful cooling facilities. Different cooling schemes such as liquid cooling, direct sprays, boiling heat transfer, etc. have been developed to meet the needs of heat …

    umn Repository record for A piezoelectric translational flow agitator for active air cooling of electronics. (opens in a new tab)

  2. Investigation of static and dynamic enhancement of laminar natural convection cooling of electronics

    With the proliferation of consumer electronics devices and the increasingly demanding thermal control requirements for such devices, more effective and efficient means of cooling electronics are needed. The feasibility of three alternative approaches to enhancing pure natural convection cooling of …

    njit Repository record for Investigation of static and dynamic enhancement of laminar natural convection cooling of electronics (opens in a new tab)

  3. PERFORMANCE CHARACTERIZATION OF POOL BOILING ON INNOVATIVE FOAMS AND MICRO STRUCTURED SURFACES - APPLICATION TO DIRECT IMMERSION COOLING OF ELECTRONICS

    This thesis is an experimental investigation of the thermal performance during boiling on copper foam and copper-finned microstructures as a thermosyphon evaporator. Copper foam is an open-celled porous media with interconnected copper ligaments of thermal conductivity up to 1.51 W/(cm2K). The …

    maryland Repository record for PERFORMANCE CHARACTERIZATION OF POOL BOILING ON INNOVATIVE FOAMS AND MICRO STRUCTURED SURFACES - APPLICATION TO DIRECT IMMERSION COOLING OF ELECTRONICS (opens in a new tab)

  4. NOVEL HEATSINK DESIGNS UTILIZING MICRO-JET IMPINGEMENT COOLING IN ELECTRONIC PACKAGING

    This report describes the design and testing of novel heatsink designs to be used in conjunction with impinging piezoelectric microblowers for use in the cooling of electronics. Unique heatsink topologies made possible by emerging additive manufacturing techniques are described and explored. The …

    jhu Repository record for NOVEL HEATSINK DESIGNS UTILIZING MICRO-JET IMPINGEMENT COOLING IN ELECTRONIC PACKAGING (opens in a new tab)

  5. Sparking an increase in volumetric and specific density for power converters with avant-garde thermal management strategies, topologies, and packaging schemes

    Increasing electrification of mechanically controlled or driven systems has created a demand for the development of compact, lightweight electronics. Removing waste heat from these high volumetric and gravimetric power dense assemblies, especially in mobile applications, requires a thorough …

    uiuc Repository record for Sparking an increase in volumetric and specific density for power converters with avant-garde thermal management strategies, topologies, and packaging schemes (opens in a new tab)

  6. Direct Immersion Cooling Via Nucleate Boiling of HFE-7100 Dielectric Liquid on Hydrophobic and Hydrophilic Surfaces

    This study experimentally investigated the effect of hydrophobic and hydrophilic surfaces characteristics on nucleate boiling heat transfer performance for the application of direct immersion cooling of electronics. A dielectric liquid, HFE – 7100 was used as the working fluid in the saturated …

    unt Repository record for Direct Immersion Cooling Via Nucleate Boiling of HFE-7100 Dielectric Liquid on Hydrophobic and Hydrophilic Surfaces (opens in a new tab)

  7. Single-phase liquid cooling for thermal management of power electronic devices

    … devices such as MOSFETs, HEMTs, and IGBTs often face reliability challenges due to poor thermal management during device operation at high power densities. In the conventional approach, such devices are packaged on power electronic substrates (e.g., direct bonded copper (DBC)) which is then …

    gatech Repository record for Single-phase liquid cooling for thermal management of power electronic devices (opens in a new tab)

  8. Boiling of Dilute Emulsions.

    … that has received little attention is boiling of dilute emulsions in which the dispersed component has a lower boiling point than the continuous component. These mixtures exhibit several surprising behaviors that were unknown until the 1970's. Generally, boiling of the dispersed component …

    umn Repository record for Boiling of Dilute Emulsions. (opens in a new tab)

  9. Using the inverse heat conduction problem and thermography for the determination of local heat transfer coefficients and fin effectiveness for longitudinal fins

    … in numerous applications, such as production of electricity, building climatisation, food preparation,... Since energy consumption has increased tremendously in the last decades and this trend will continue, the concept of energy efficiency has become omnipresent. In electronics …

    ghent Repository record for Using the inverse heat conduction problem and thermography for the determination of local heat transfer coefficients and fin effectiveness for longitudinal fins (opens in a new tab)

  10. Design And Experimental Study Of An Integrated Vapor Chamber -" Thermal Energy Storage System

    … vehicles, which will require the development of an efficient thermal management system. A key design issue is the need for fast charging so as not to overheat the key components. The goal of this work is to study the fabrication and technology implementation feasibility of a novel high energy …

    ucf Repository record for Design And Experimental Study Of An Integrated Vapor Chamber -" Thermal Energy Storage System (opens in a new tab)

  11. Periodic reverse flow in microchannel evaporators

    … for instance, microchannel heat sinks for cooling of electronics. Due to the industry’s strict requirement for thermal stability, previous research on flow instabilities in microchannels has been largely focused on heat sinks for electronic cooling. There is a lack of understanding of the …

    uiuc Repository record for Periodic reverse flow in microchannel evaporators (opens in a new tab)