Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 107 for “"Cooling time"”.
-
Thermal Modeling of Cooling Time of Submarine Dacite Lapilli Tuff: Brothers Volcano, Kermadec Arc
… heat transfer equation of a sphere to create a cooling curve model of a lapilli dacite clast from its initial eruption temperature to the Curie temperature of magnetite to compare to the acquisition of the paleomagnetic remanent vector to test modes of eruption style. The model was created using …
-
Research reactor used fuel burnup and cooling-time verification using an underwater γ-¬γ coincidence technique
… activities are inversely proportional to the cooling time and proportional to the fuel burnup. Researchers have previously used 134Cs/137Cs and 154Eu/137Cs gamma activity ratios to estimate nuclear reactor fuel's burnup and cooling time for international safeguards. However, it can be …
-
Effect of Interlayer Cooling Time on the Microstructure and Mechanical Properties of Alloy Amalgamation in Multilayer Titanium Alloys
… investigates the effect of varying interlayer cooling times on the microstructure and mechanical properties of these alloys. The binary alloy chosen for this research is a mixture of ($\alpha$+$\beta$ and $\beta$-Ti alloy). Two multilayer binary titanium alloys of the same composition were …
-
De-oiling and Pre-treatments for High-Quality Potato Chips
… the frying (145°, 165° and 185°C or 165°C) and cooling (0, 15, 30, 45 and 60 s or 0.60 and 120 s) steps. Lower frying temperature, higher centrifuge speed, and shorter cooling time resulted in the lowest oil uptake in potato chips. Pre-treatments (blanching and soaking) decreased (5 percent and …
-
Empirical Modeling of Used Nuclear Fuel Radiation Emissions for Safeguards Purposes
… characteristic of the fuel, such as burnup or cooling time, they often require an accurate estimation of a select few isotopes in the fuel. This requirement means that the characterization is based on a very small amount of information that is contained in radiation emissions. To help overcome …
-
Wire Direct Energy Deposition of Cobalt Iron Alloy
… an increase of bead height and width. Interlayer cooling time for multi-layer deposition was tested and revealed, through thermal camera measurement, that increasing interlayer cooling time leads to a higher cooling rate, and generally more stable printing process. Printed samples showed single …
-
On The Origin of Cold Molecular Gas In Giant Elliptical Galaxies
… the detection of molecular gas when the central cooling time or entropy index of the hot atmosphere falls below ~1 Gyr or ~35 keV cm², respectively. This shows a direct relationship between the molecular gas and the local state of the intracluster gas, which is found to always exceed the amount …
-
Development of Technical Nuclear Forensics for Spent Research Reactor Fuel
… initial uranium isotopic compositions, and cooling time of a research reactor spent fuel sample. A convergence acceleration technique was used that consisted of an analytical calculation to predict burnup, initial 235U, and 236U enrichments. The analytic calculation results may also be used …
-
PROPOSED METHODOLOGIES FOR PEBBLE BED REACTOR SPENT FUEL CHARACTERIZATION
… hypothesis is that average discharge burnup and cooling time are sufficient to accurately estimate SNF characteristics relevant to radiological dose rate, criticality safety, and decay heat, provided that the effects of other parameters are incorporated through bounding calculations. To evaluate …
-
Theoretical, Experimental, and Numerical Investigations Into Laser Repair of Adhered MEMS Structures
… difference between the beam and substrate and cooling time after laser irradiation.
-
Conduction Plus Convection Heat Flow Modeling for the Linga Complex, Peruvian Coastal Batholith
… the permeability from 10-22 to 10-14m2 changed cooling time from 180 to 125kyrs. This range of permeabilities could reproduce conditions for 450-600°C potassic and 220-350°C propylitic alteration in the host rock. Decreasing intrusion temperature from 1000°C to 700°C decreased cooling time from …
-
Charcoal cooling kinetics: computational simulation and industrial applications
… heat that must be removed during the charcoal cooling stage, as reflected in the extended process time. The long cooling time is also due to the heat generation in oxidation reactions at low temperatures. The intensity of this reactions depends on complex interactions between the interstitial …
-
A study of parameters effect on the quality of injection molding parts using Taguchi's methodology
… injection pressure, holding pressure, holding time, cooling time, back pressure, melt temperature and mold temperature. The study included three different materials. Materials included in this study were high-density polyethylene, general-purpose polystyrene, and acrylonitrile butadiene styrene.
-
Investigation and fabrication of nanostructured thin films for hot carrier solar cells using colloidal Lead Sulfide QDs
… selective contact fabrication. The carrier cooling dynamics of the PbS QDs solid films are studied with transient and steady-state optical spectroscopy. By using power and temperature dependent continuous wave photoluminescence, the carrier temperature and thermalization parameters of the …
-
Powerful Shocks and Cavities in the Hot Atmosphere of the MS 0735 Galaxy Cluster
… have failed to find evidence of gas cooling to low temperatures at the expected rates. Instead, feedback from active galactic nuclei (AGN) is heating the intracluster medium and suppressing cooling flows. X-ray observations have revealed large cavities, weak shocks, and sound waves in …
-
Impact of Interleaved Thermally Conductive Material with Conformal Fluid Channels on Tooling Thermal Response
Cooling time between plastic injection and part ejection in the injection molding tooling industry can account for 50-70% of the cycle time for molded components. It has been determined cooling time can be decreased by 35% with conformal cooling channels and 29% with copper inserts. The rapid …
-
An investigation into titanium hydride as a hot carrier solar cell absorber
… are used to study the electron thermalisation time of TiHx. Despite the strong noise affecting the results, considerably long carrier cooling time is calculated by ΔOD decay time fitting. The observed long carrier cooling time in titanium hydride is supportive to the expectation that its large …
-
Adiabaticity of high strain rate compression testing using the Split Hopkinson Pressure Bar Apparatus
… So far it has been assumed that, relative to the cooling time, the deformation time is practically instantaneous indicating that the test is adiabatc: none of the heat generated within the metal is lost to conduction. In this paper we construct a model that subtracts out the effects of kinetic …
-
The Dependence of Radio-Mode Feedback on Baryonic and Halo Mass
… a tremendous amount of energy, preventing rapid cooling of the X-ray atmospheres, and suppressing star formation in massive galaxies. In this thesis I investigate the link between feedback from active galactic nuclei (AGN) and the large-scale properties of galaxy clusters. I begin by analysing …
-
Deformations and Stresses in Welded Panels: Development and analysis of a simulation procedure for two-pass fillet welding of a stiffener to a plate
… draw faster conclusions by saving computational time. Once the analysis for the shorter plate has been conducted, a longer plate (1000 mm) representing the benchmark geometry is analysed. To verify that a simplified model of the heat input can be used, FE-simulations on the short plate are used …
Page 1 of 6