Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"Copper powder"”.
-
An Experimental Investigation of Debinding and Sintering Parameters for Copper Powder Material Extrusion
… debinding and sintering parameter effects using Powder Metal Extrusion (PME). Specifically, a Polylactic Acid (PLA) - Copper filament was used with a traditional Fused Filament Fabrication (FFF) printer to produce parts consisting of copper particles and a PLA binder. Using a two-step thermal …
-
Optimization of Copper Coatings: Cold Spray, HVAF, and N-Heterocyclic Carbene Copper Powder Treatment
This thesis explores the deposition of copper coatings using Cold Spray (CS) and High-Velocity Air Fuel (HVAF) technologies, focusing on minimizing oxide formation to preserve copper’s desirable properties for high-performance applications in aerospace, automotive, and energy industries. Copper is …
-
An electrochemical reduction process for the recovery of copper powder from a refinery effluent stream
… hydrochlorination contains predominantly silver, copper, nickel and iron. This off-gas undergoes a quench-scrub to condense the base metal chlorides. The quench-scrub liquor undergoes a dechlorination process with sulfuric acid to precipitate AgCl(s). The filtrate from this process then undergoes …
-
Characterization and Improvement of Powder Properties Through Plasma Spheroidization for use in the Laser Powder Bed Fusion Process
… research was conducted to characterize the powder properties using different characterization techniques to enhance the powder behavior in the Laser Powder Bed Fusion (LPBF) process. One of the shortcomings of LPBF process is the high cost of gas-atomized powder feedstock. To overcome this …
-
Synthesis and characterization of bulk nanostructured copper for nano wafer level packaging
In the present study, nano size pure copper powder with grain size approximately 48nm and 78nm and micron size copper powder with grain size in nano meter range were uniaxially die compacted at room temperature at pressures ranging from 0.25GPa to 1.00GPa. The selection of pressure range was made …
-
Reduction leaching of chalcopyrite
… leach methods for chalcopyrite (CuFeS₂) copper concentrates. It has been found that chalcopyrite can be essentially completely converted to chalcocite (Cu₂S) by leaching in strong copper sulphate solutions at elevated temperatures, using either pressurized hydrogen gas or metallic copper …
-
Mechanical properties of nanocrystalline copper and copper-iron based alloys
The mechanical properties of mechanically milled copper and copper-30 iron were studied in the as-milled and consolidated conditions. Hardness, elastic modulus, and strain-rate sensitivity were measured on mechanically milled powders using ultra-low load indentation techniques. The bulk …
-
X-ray diffraction applications in thin films and (100) silicon substrate stress analysis
… to obtain accurate results, including adding copper powder on top of the sample. The copper powder that was added is not under stress, and therefore will not shift its reflection peak when the sample is under bending stress, thus serving as a reference in order to make corrections. The strain …
-
Methanol Reactions on Copper
… and hydrogen has been studied on various copper foil and wire catalysts. Pure copper foil and wire were found to be inactive towards the decomposition of methanol, and yet many authors have reported decomposition occurring on reduced copper powder activated by oxidation/reduction …
-
Studies of dispersion-hardening parameters
Experiments were carried out with 1 micron copper powder compacts containing up to 7.5 vol % .018 micron alumina, and with various types of lead powder compacts containing up to 20 vol % of various other materials. The results indicate that dispersion-hardened alloys should be divided into three …
-
Investigating production routes and application of nanotechnology for improved properties of porous copper structures
… production routes for the fabrication of porous copper structures using different powder types. Porous copper structures are beneficial for several applications, such as heat sinks, air filtration, and catalysts. The study started with the use of two different types of powder particles (spherical …
-
A study of copper thick film conductor adhesion mechanisms on ceramic substrates
In this study, copper thick film adhesion mechanisms and its failure modes on different ceramic substrates (glass ceramic, $\rm Al\sb2O\sb3$ and AlN) were investigated as a function of aging time at 150$\sp\circ$C in the presence of Pb/Sn solders. The copper thick film inks were formulated from …
-
Metallization of Carbon Fibre Reinforced Composites by Lay-up on Cold Sprayed Coatings and by GRIP Metal™ as Bond Coat for Cold Spray
… sheets for erosion protection, and embedding copper mesh for lighting strike in relevant areas of the CFRCs. The purpose of this research was to investigate two potential alternative methods for metallizing, thus protecting CFRC against erosion and lightning strikes. The first approach …
-
A Study Of The Hydrothermal Stability Of Copper For Use As A Container Material For Nuclear Waste At The Hanford Site, Richland, Washington
The hydrothermal stability of copper has been studied to assess its suitability as a container material for disposal of nuclear waste in the proposed repository site at Hanford, Wa. The experiments were conducted using titanium reaction cells at 200° and 300°C, 30 MPa, using Dickson rocking …
-
Derivatives of substituted phenylboronic acids
… of an aryldiazonium mercury trichloride with copper powder. A series of dialkyl p-bromophenylboronates have been prepared and characterised. Their infra-red spectra were also recorded and assignments of the vibration frequencies of the B-O, B-Phenyl, and O-O bonds made. The densities and …
-
The Synthesis and Study of Polycyclic Aromatic Systems
… of 1,2,4,5-tetrabenzoylbenzene (VIII) with copper powder in sulphuric acid is investigated with a view to the possible preparation of a compound having a bond of the Dewar type. The major product is found to be 5,6-dibenzoyl-1,3-diphenylisobenzofuran (IX). The azine derivative of this …
-
Microfabricated thin silicon vapor chambers for low profile thermal management
… chambers with patterned bi-porous monolayer copper powder wick structures; 2) development of a charging station that evacuates and charges a vapor chamber at a rate of 10 µl/min; 3) thermal characterization experiments for the fabricated vapor chambers to evaluate their performance; 4) …
-
RF-QPC Charge Detector and S-T₊ Qubit in a Lateral Double Quantum Dot Device
… gas (2DEG) of a GaAs/AlGaAs heterostructure. Copper powder and RC filters are constructed to isolate the device from sources of instrumentation and thermal noise, allowing the temperature of the 2DEG to reach 70 mK. Coaxial cables and bias tees allow Gaussian shaped pulses to be delivered to …
Page 1 of 3