Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Copper selenide"”.
-
Synthesis, Characterization, and Testing of Copper Selenide-Graphene Nanocomposites for Thermoelectric Applications
… The liquid-like superionic behavior of copper selenides and their ultra-low thermal conductivity have attracted interest as potential thermoelectric material. However, to reach practical applications, the thermoelectric performance of copper selenides requires enhancement. In this …
-
Novel phase and phase transition behavior of a superionic conductor observed on the nanoscale
… transport in a prototypical fast-ion conductor, copper selenide. Major objectives of my work were to elucidate i) the nature of the structural phase transition by which copper selenide becomes a superionic phase and ii) the microscopic mechanisms of ionic motion in this material. My studies were …
-
Assembly of colloidal nanocrystals into phospholipid structures and photothermal materials
… CuInSSe nanocrystals, as well as 16 nm diameter copper selenide (Cu₂₋[subscript x]Se) nanocrystals exhibiting strong absorbance of near infrared light suitable for biomedical applications. However, the syntheses yield nanocrystals that are stabilized by an adsorbed layer of hydrocarbons, making …
-
A Comparative Study of Copper Chalcogenide Nanocrystals as Agents for Photothermal Therapy
In recent years, copper sulfide nanocrystals (NCs) have emerged as promising candidates for new photothermal agents due to their strong near-infrared (NIR) light absorption, high photostability, low toxicity, and suitable size for photothermal therapy.1,2 However, the low photothermal conversion …
-
Probing the Role of Hot Carriers and Photothermal Effects in Plasmonic Photocatalysis with Ultrafast Surface-Enhanced Raman Spectroscopy
… new non-noble plasmonic material, consisting of copper selenide nanoparticles, by measuring their SERS enhancement factor. Additionally, copper selenide nanoparticles are promising photocatalysts as shown by their ability to dimerize 4-NBT in the presence of light. New plasmonic materials, like …
-
Titano anodinių plėvelių dekoravimo matomą šviesą sugeriančiais puslaidininkių nanodariniais tyrimas /
… nanoparticles were proposed: with weakly acidic copper acetate electrolyte and alternating current. Growth of pure Cu2O crystals in the TiO2 Ntbs was based on thermodynamic analysis of the solution. It has been discovered that TiO2 Ntb films decorated with Cu2O nanoparticles are able to absorb …
-
Study on titanium anodic films decoration with visible light absorbing semiconductor nanostructures /
… nanoparticles were proposed: with weakly acidic copper acetate electrolyte and alternating current. Growth of pure Cu2O crystals in the TiO2 Ntbs was based on thermodynamic analysis of the solution. It has been discovered that TiO2 Ntb films decorated with Cu2O nanoparticles are able to absorb …
-
Thermoelectric Properties and Stability of Barium Copper Chalcogenides
… was to study the thermoelectric properties of copper chalcogenide-based materials with mixed chalcogen atom sites. Herein, the effect of different concentrations of chalcogen atoms on the physical property measurements and the performance of the thermoelectric materials with two different …
-
Pulsed Laser Deposition And Electrical Properties Of Zinc Selenide Based Thin Film Structures For Integration With Mid-Infrared Applications
Thin films of chlorine (Cl) and copper (Cu) doped zinc selenide (Cl:ZnSe and Cu:ZnSe) were fabricated by pulsed laser deposition (PLD) with the goal of enabling a multilayered semiconductor structure for a mid-infrared (mid-IR) electrically excited laser. Doping of ZnSe is achieved by varying the …
-
Green Chemistry Approach for The Synthesis of Transition Metal Sulfides based on Cu2ZnSnS4 (CZTS) and Etching of Their Impurities
… and 2-mercaptoethanol to eliminate undesired copper sulfide (Cu2-XS) or copper selenide (Cu2-XS) phases from CZTS thin films. The development of this etching solution represents a viable alternative to the widely used etching methods based on potassium cyanide (KCN) use. The fifth chapter …
-
Insights on Plasmon-Driven Chemical and Photophysical Processes Using Surface Enhanced Raman Spectroscopy: From the Steady State to the Ultrafast
… wave upconversion process with plasmonic copper selenide nanocrystals. Our initial studies suggest that a plasmon-driven thermal mechanism likely plays a role in this unexpected photoluminescence. Lastly, I will describe a number of prospective directions for research on plasmonic systems. …
-
Photocatalytic reduction of selenate and selenite : water/wastewater treatment and the formation of nano-selenium compounds
… technique in the formation of Se-compounds such copper selenide, cadmium selenide and zinc selenide. All these compounds were widely used in optical and semiconducting devices.
-
Exploring condensed phases in engineered semiconducting nanocrystals
… exchange. In Chapter 2, I discuss how ultrasmall copper selenide (Cu2-xSe) NCs prepared by cation exchange of cadmium selenide NCs exhibit a disordered cationic sub-lattice under ambient conditions. This behavior is quite unlike larger NCs or the bulk, suggesting an interesting effect of …
-
Materials characterization of solution-processed CuIn(S,Se)₂ absorber films for use in thin-film solar cells
… 1.0 and above, detrimental secondary phases of copper selenide compounds were found to be present. Both the (NH₄)₂S and KCN etchants were found to effectively etch these secondary phases. This work strongly supports the use of the presented solution-based fabrication method, validating both the …
-
Investigation into the kinetics, mechanisms and particle characteristics of selenium precipitation from copper sulphate solution.
The removal of selenium from copper sulphate solution prior to the electrowinning of copper is desirable in order to minimise contamination of the copper cathodes by selenium and other impurities. The selenium removal is effected by a precipitation process that takes place under high …
-
Near-infrared plasmonics with vacancy doped semiconductor nanocrystals
… doped NCs and noble metal nanoparticles. Copper chalcogenide NCs, namely copper sulfide (Cu2-xS), copper selenide (Cu2-xSe), and copper telluride (Cu2-xTe), are an attractive example of vacancy doped semiconductor NCs, with spectra dominated by intense NIR resonances. Within this study …
-
Towards rational synthetic design of ternary chalcogenide nanoparticles through mechanistic studies of copper tetraselenophosphate
… ternary nanoparticles (TNPs), such as copper tetraselenophosphate (Cu3PSe4) represent compelling targets for next-generation photovoltaics and energy storage due to their highly tunable electronic structures and high theoretical efficiencies. However, realizing the potential of these …
-
Tuning optoelectronic properties and understanding charge transport in nanocrystal thin films of earth abundant semiconducting materials
… of the nanocrystals were tuned by altering the copper to zinc ratio, as well as by introducing selenium to create Cu2ZnSn(S1-xSex)4 solid solutions. Photoelectrochemical characterization was used to test the Cu2ZnSnS4 and Cu2ZnSn(S1-xSex)4 nanocrystal thin films. The results identify minority …
-
Development of Window Layer for High Efficiency High Bandgap Cadmium Selenide Solar Cell for 4-Terminal Tandem Solar Cell Applications
… window layer to form a tunneling contact with Copper.Deposition of ZnSe from binary sources in presence of nitrogen plasma resulted in films with proper stoichiometry. However, doping could not be accomplished. ZnTe is easily dopable, and was the next alternative. ZnTe doping in presence of …