Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 172 for “"Corrosion Potential"”.
-
Testing Aggregate Backfill for Corrosion Potential
… however galvanized steel reinforcement is potentially vulnerable to corrosion. Corrosivity of MSE backfill is typically characterized using electrical resistivity among other properties. KDOT currently uses the American Association of State Highway and Transportation Officials (AASHTO) …
-
Embedded Reference Electrodes for Corrosion Potential Monitoring, Electrochemical Characterization, and Controlled-Potential Cathodic Protection
… two sacrificial coating systems to monitor their corrosion potential. This is the first report of a reference electrode embedded between organic coating layers to monitor substrate health. The embedded reference electrode (ERE) successfully monitored the corrosion potential of Mg primer on AA …
-
Inductively Coupled Corrosion Potential Sensor for Remote Passive Monitoring of New and Existing Civil Structures
… process of an inductively coupled coil corrosion potential sensor for long-term civil structure health monitoring remotely. This is of growing interest for decreasing the maintenance cost, reducing the deterioration significantly and increasing the safety. The thesis is organized …
-
Investigation of Variations in Corrosion Potential in Mechanically Stabilized Earth Backfill Due to Migration of Fines
… can create a corrosive environment. Excessive corrosion can lead to distresses or premature failure of MSE structures. Corrosion may increase when cycles of water from precipitation promote migration of fines through the granular backfill. Migrating fines have the potential to accumulate at the …
-
Electrochemical Thermodynamics of Stress-Corrosion Interaction of Pipeline Steel
… usually operate under stressing conditions. When corrosion occurs on the structures in service environments, the stress and corrosion reactions synergistically result in a so-called mechano-electrochemical (M-E) interaction, adversely affecting the structural integrity. In this work, …
-
Biodegradabilní kostní implantáty na bázi železa
… sintering, iron, ferrous alloys, electrochemical corrosion, corrosion potential, spectroscopy
-
Coupled Resonant Coil Sensors for Remote Passive Monitoring Applications
… coil sensor, which is able to monitor the corrosion potential of reinforcement steel is presented. Results of an accelerated corrosion test using the sensor indicate that corrosion potential can be monitored with a resolution less than 10 mV and a sensitivity of 0.76 kHz/mV. The last part …
-
Stress corrosion cracking and hydrogen embrittlement of thick section high strength low alloy steel.
… experimental study was conducted to evaluate the corrosion performance of weldments of a high strength low alloy(HSLA) steel in a simulated seawater environment. This steel, designated HSLA80, was developed by the United States Navy for use in ship structural applications. Stress corrosion …
-
Characterization of the corrosion of a P-130x graphite fiber reinforced 6063 aluminum metal matrix composite.
The corrosion behavior of a P-130x graphite fiber reinforced 6063 aluminum 0-90 cross plied metal matrix composite was studied. Electrochemical tests were performed on the composite and the monolithic matrix metal in aqueous 3.5% NaCl solutions. Immersion tests were performed on the composite in …
-
Elektrocheminės paladžio korozijos tyrimas /
… is considered as a metal highly resistant to corrosion, the understanding of its corrosion and anodic behavior is incomplete. In this study the values of important electrochemical corrosion parameters such as corrosion potential, corrosion current density, and polarization resistance were …
-
Influence of Sulphide on the Degradation Pathways for Chlorinated Ethenes
… of a small amount of sulphide precipitates, and corrosion potential measurements showed that sulphide shifted the corrosion potential of the iron to less negative values by approximately 70 mV, suggesting that the change in corrosion potential was not responsible for the preferential degradation …
-
A Comparison of Corrosion Rates Determined by Polarization Resistance Measurements for Zinc and Cadmium Metal Immersed in Nonstirred Aqueous Portland Cement Solution
… aqueous Portland cement solution on the corrosion rates of zinc and cadmium metal using Tafel extrapolation and linear polarization measurements has been investigated. Results indicate that for the corrosion systems under investigation, zinc metal has a higher corrosion potential and …
-
Attrition-corrosion wear of dental enamel
Attrition-corrosion of human dental enamel is an enamel-on-enamel wear process in an acidic environment. Though the risk of attrition-corrosion is increasing nowadays, associated research is limited and the underlying wear mechanism remains unclear and hence is the subject of this study. …
-
Electrochemical Methods to Characterize Drilled Shaft Deficiencies
… the slurry type and viscosity. Electrochemical corrosion potential test results from 23 lab cast specimens showed that the shafts cast using bentonite slurry were 54% more likely to exhibit corrosion potential crossing the ASTM threshold of -350mV. The laboratory setting allowed for visual …
-
The effect of halide and metal ions on the corrosion of aluminium in ethylene glycol solutions
… halide anions. Since copper cations enhance the corrosion rate of aluminium, the effect of other metal cations of metals commonly found in the cooling system on the corrosion rate were evaluated. Aluminium samples were exposed to 50% ethanediol solutions containing various metals and metal …
-
Corrosion Behavior of H-Pile Steel in Different Soils
This dissertation aimed to study the corrosion performance of carbon steel in different soils, collected from the state of Wisconsin. Carbon steel specimens (as-received) as well as steel embedded in mortar (steel-mortar) specimens, to simulate the realistic H-pile design in bridges, were used in …
-
Determining effect of cementitious repair materials on embedded steel reinforcement exposed to chloride environment using electrochemical NDT methods
… to construct buildings all around the globe. Corrosion-affected RC structures may lose durability, possibly reducing life expectancy or failing catastrophically if timely action is not taken. Critical content of chloride accumulated at the rebar-concrete interface may break the protective …
-
The detection of crevice corrosion in titanium and its alloys through the use of potential monitoring
Conventional laboratory crevice corrosion testing requires approximately thirty days and is a simple go/no go test which does not indicate crevice incubation time and propagation. This study focuses on the effectiveness of potential monitoring to detect the onset of crevice corrosion and …
-
Electrochemistry of stress corrosion cracking of brass
<p>The stress corrosion cracking (SCC) susceptibility of pure copper and two brass (copper-zinc alloy) compositions (80/20 and 60/39) was studied in several ammoniacal and nonammoniacal aqueous solutions at open circuit potential applying a constant load technique. The SCC tests, using tensile …
Page 1 of 9