Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 502 for “"Corrosion Rate"”.

  1. Corrosion Rate Prediction in FRP-Concrete Repair

    … polymers (FRPs) slows down chloride-induced corrosion rate but does not stop it. Although FRP has been used for corrosion repair for over 40 years, predictive corrosion rate models for FRP-concrete systems are limited in literature. This dissertation presents an oxygen diffusion-based …

    usf Repository record for Corrosion Rate Prediction in FRP-Concrete Repair (opens in a new tab)

  2. The effect of fuel on the corrosion rate of commercial steels- a field study

    … The purpose of this study is to analyze the corrosion mechanisms of various commercially used stainless-steel alloys and compare their costs to fulfill the goal of determining the most suitable alloy in terms of lifetime and maintenance cost. The value of this research is based upon the …

    chalmers Repository record for The effect of fuel on the corrosion rate of commercial steels- a field study (opens in a new tab)

  3. Corrosion rate of steel reinforcement in concrete in seawater and influence of concrete crack width

    This thesis reports a research of the corrosion mechanism and corrosion rate of steel reinforcement in concrete. Experimental results are presented to compare the corrosion behaviours of steel reinforcement in two blended-cement concretes in seawater. The experimental program included a study of …

    unsw Repository record for Corrosion rate of steel reinforcement in concrete in seawater and influence of concrete crack width (opens in a new tab)

  4. The effect of pH adjustment on the internal corrosion rate of cast iron and copper water distribution pipes

    … examine to effects of pH adjustment on internal corrosion of cast iron and copper water distribution pipes. The Greater Vancouver Regional District uses surface lakes as its potable water source. As confirmed by chemical water characteristics monitoring, the supplied tap water has several of the …

    ubc Repository record for The effect of pH adjustment on the internal corrosion rate of cast iron and copper water distribution pipes (opens in a new tab) Download PDF for The effect of pH adjustment on the internal corrosion rate of cast iron and copper water distribution pipes (opens in a new tab)

  5. Effect of a Simulated Butterfly Valve on the Erosion-Corrosion Rate of Nickel Aluminum Bronze Alloys in Highly Turbulent Seawater

    … and maritime applications for their excellent corrosion resistance under the influence of seawater. One application involves the use of a NAB butterfly valve within a NAB fluid line to control fluid flow of seawater. Due to the chaotic environment, the corrosion rate of the NAB tubing …

    vt Repository record for Effect of a Simulated Butterfly Valve on the Erosion-Corrosion Rate of Nickel Aluminum Bronze Alloys in Highly Turbulent Seawater (opens in a new tab)

  6. The development of empirical chloride-induced corrosion rate prediction models for cracked and uncracked steel reinforced concrete structures in the marine tidal zone

    Empirical chloride-induced corrosion rate prediction models for cracked and uncracked reinforced concrete (RC) structures in the marine tidal exposure zone are proposed in this study. The data used to develop the models were obtained from parallel corrosion experiments carried out by exposing half …

    cape-town Repository record for The development of empirical chloride-induced corrosion rate prediction models for cracked and uncracked steel reinforced concrete structures in the marine tidal zone (opens in a new tab)

  7. A study of the nitric acid corrosion rate results as determined by ASTM A-262 Practice C on TP-304-L tubular products

    <p>Basic metallurgical factors affecting the corrosion behavior of wrought TP-304-L tubular products in the ASTM A-262 Practice C (Nitric Acid) corrosion test is reviewed. Over l00 heats of TP-304-L were selected statistically to provide a range of variables within ASTM tubular product …

    ut-knoxville Repository record for A study of the nitric acid corrosion rate results as determined by ASTM A-262 Practice C on TP-304-L tubular products (opens in a new tab)

  8. Corrosion of Orthodontic Brackets: Cost, Cold Worked, and Powdered Metal

    … of this study is to evaluate the relative corrosion rates of 316-L stainless steel cast metal, cold worked, and powdered metal brackets. This is done using potentiodynamic anodic polarization to measure the voltage difference between the samples and a reference electrode. Corrosion layers …

    loma-linda Repository record for Corrosion of Orthodontic Brackets: Cost, Cold Worked, and Powdered Metal (opens in a new tab)

  9. A time to cracking model for critically contaminated reinforced concrete structures

    In addressing the need for a site specific corrosion model for concrete structures, Bazant’s time to first cracking model was used as the basis for an experimental research study. The theoretical model, which expresses the time to first cracking as a function of the corrosion rate and physical …

    vt Repository record for A time to cracking model for critically contaminated reinforced concrete structures (opens in a new tab)

  10. A parametric investigation on the influence and inhibition performance on CO2 corrosion of carbon steel

    The deposition of hydrate and corrosion in the pipeline remain a major challenge in the petroleum industry. Internal corrosion slows and decreases the production of oil and gas when associated with free water and reacts with organic acid. Experiments had shown that the corrosion products (ferrous …

    salford Download PDF for A parametric investigation on the influence and inhibition performance on CO2 corrosion of carbon steel (opens in a new tab)

  11. Automated Monitoring of Metal Corrosion for Water Delivery Infrastructure

    The real-time corrosion rate of mild steel in drinking water and the properties of that water are measured and recorded in time using a newly build computed automated system. A non-destructive electrochemical method is used to find the corrosion rate (CR) of mild steel coupons in time and these are …

    arizona-thes Repository record for Automated Monitoring of Metal Corrosion for Water Delivery Infrastructure (opens in a new tab)

  12. Development of Mechanistic Models and Numerical Methods for Corrosion Prediction in Oil Industry

    Corrosion is the primary mechanism resulting in facility failures in oil industry, where downhole tubulars, above-ground gathering pipelines and buried transmission pipelines constitute the important facilities. Corrosion modelling is advantageous over experimental studies, and has been essential …

    calgary Repository record for Development of Mechanistic Models and Numerical Methods for Corrosion Prediction in Oil Industry (opens in a new tab)

  13. Modelling water quality in tropical water distribution systems

    … evaluate the influence of these parameters on corrosion and iron release in a tropical drinking water distribution system. The approach of this study was split into three (3) components: • Conduct a pilot study on a distribution system in the tropics and assemble, calibrate and validate a …

    jamescook Download PDF for Modelling water quality in tropical water distribution systems (opens in a new tab)

  14. Effect of radio frequency treatment of water on scale formation and corrosion

    … treatment of water on scale formation and corrosion were studied. Mass-loss measurements, microscopic surface examinations, and electrochemical impedance spectroscopy were used to evaluate the scale formation rates and corrosion rates of carbon steel specimens exposed to a supersaturated …

    ut-knoxville Repository record for Effect of radio frequency treatment of water on scale formation and corrosion (opens in a new tab)

  15. A Study of Corrosion Monitoring Techniques Used in URLs for Metals

    … high-levels radioactive nuclear waste are generated, so the safe use of nuclear energy requires proper disposal of high-level radioactive nuclear waste. The selected treatment method is deep geological disposal. Therefore, underground research laboratory (URL) to prepare for deep geological …

    usf Repository record for A Study of Corrosion Monitoring Techniques Used in URLs for Metals (opens in a new tab)

  16. Effect of Heat Treatment and Silver Deposition on the Corrosion Behaviour of Magnesium Alloys for Bone Implant Applications

    … bone implant materials provided the corrosion rate can be controlled. Thus, corrosion behaviour was investigated for pure Mg, Mg-2Ca, and Mg-2Ca-1Zn cast alloys subjected to either no heat treatment or to solutionizing and aging heat treatment. In addition, corrosion behaviour was …

    waterloo Repository record for Effect of Heat Treatment and Silver Deposition on the Corrosion Behaviour of Magnesium Alloys for Bone Implant Applications (opens in a new tab)

  17. Experimental investigation on electrical resistivity of SFRC

    … which need large amount of reinforcement making corrosion of steel one of the most critical parameters in assessing their service life. Lately, steel fibres have been used together with traditional reinforcement bars to limit the crack widths and minimize the chloride ingress to reduce the risk …

    chalmers Repository record for Experimental investigation on electrical resistivity of SFRC (opens in a new tab)

Page 1 of 26