Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Corrosion analysis"”.
-
ENHANCED CORROSION ANALYSIS ON CURVED STEEL SHEETS USING FREEFORM ROBOTIC ECA
Thesis (Ph.D.)--Michigan State University. Electrical and Computer Engineering - Doctor of Philosophy, 2024
-
Development of a Novel, Cost-Effective, Open-Source Flow-type Electrochemical Microcell for Localized Corrosion Analysis using Additive Manufacturing Technology
… components. One of the most difficult forms of corrosion to predict and plan for is localized corrosion. While uniform corrosion occurs at a predictable rate, localized corrosion can lead to catastrophic failure with little notice. Due to localized corrosion being specific to the material and …
-
Corrosion Characteristics And Mechanical Properties Of Aluminum Coatings Applied By The Cold Spray Process
… a chromate conversion layer. An exhaustive corrosion analysis was then performed which utilized a number of long termand accelerated tests in order to characterize the corrosion protection of the coatings.
-
Effect of annealing on the passive film stability and corrosion resistance of new families of iron-based amorphous metals
… can also be formulated to have exceptional corrosion resistance. Compositions of several iron-based amorphous metals have been published, including several with very good corrosion resistance. The benefits of chromium, molybdenum, and tungsten on corrosion resistance has been previously …
-
Influência e uso do inibidor nitrito de sódio no combate à corrosão na armadura do concreto
The influence of sodium nitrite on the process of corrosion inhibition of steel inserted in concrete was studied. Steel contents (relative to cement mass) used in this work were 0, 4, 6, 8, 10%. Marine atmosphere was mimicked by immersing the samples in 3,5% aqueous NaCl Solutions. The inhibitor …
-
Corrosion and Fretting Corrosion Studies of medical grade CoCrMo implant material in a more clinically relevant simulated body environment.
… implants, micro-motion, which leads to fretting corrosion at the head/neck and neck/stem interfaces, has been identified as a major cause of early revision in hip implants, particularly those with heads larger than 32mm. It has been found that the type of fluid used to simulate the fretting …
-
Designing and Optimizing a Biofilm Experiment for Space Flight
… aeruginosa, and can also induce clogs and corrosion damage on stainless-steel components. To investigate biofilm formation, silver disinfection susceptibility, and potential microbial corrosion in space flight, an experiment will be launched to the ISS on SpaceX-21 in December 2020. To …
-
Laser Surface Treatment of Amorphous Metals
… values. Amorphous materials exhibit excellent corrosion resistance by virtue of their atomic structure. Fe-based amorphous materials are economical and due to their ease of processing are of potential interest to synthesize as coatings materials for wear and corrosion resistance applications. …
-
Multiphysics-coupling analysis on reinforcement corrosion in reinforced concrete structures
… over prolonged service, with reinforcement corrosion emerging as a principal concern. Corrosion not only gradually diminishes sectional area of reinforcement but also induces cracking of cover concrete, thereby compromising structural load-bearing capacity and posing a risk of catastrophic …
-
The Development of Qualification Standards for Cast Super Duplex Stainless Steel (2507 Wrought Equivalent)
… Method B. This was followed by etch testing and corrosion analysis based on ASTM A923 Test Methods A and C respectively at University of Tennessee. Hardness testing using Rockwell B and C was also carried out on these samples. A correlation was derived between all the three test methods and the …
-
Synergistic Effect of Different Testing Environments on Mechanical Characteristics and Failure of X70 Pipeline Steel
… used in the pipelines is often susceptible to corrosion, hydrogen degradation, embrittlement, and cracking. The ingress of hydrogen results in deterioration of mechanical properties such as ductility, strength, and toughness. In this work, the effect of different hydrogen environments on …
-
The effect of acidity and salinity level in erosion-corrosion performance of metals
… of acidity and salinity levels on the erosion-corrosion behaviour of metallic materials used in the mining industry. In such environments, the level of both acidity and salinity significantly affects the alloys used for manufacturing either critical parts of pumps or pipelines that are subject …
-
Low-Temperature Aqueous Corrosion Behavior of Uranium Molybdenum Alloys
… in-reactor. One of these important conditions is corrosion, particularly that of fuel constituents. Therefore, corrosion behavior is of special interest and an essential part of nuclear materials characterization efforts. In support of the Office of Material Management and Minimization’s Reactor …
-
Effect of thermal annealing and carbon implantation on the functional properties of nanocomposite TiSiN coatings on steel
… that control the mechanical, tribological, and corrosion behaviours of these coatings. Cutting tools protected by these coatings are anticipated to exhibit a unique combination of superior toughness and greater resistance to wear and corrosion, providing significant economic and environmental …
-
Use of Statistical Methods to Study Corrosion Aggressiveness at Nevada Mechanically Stabilized Earth Wall Sites
… walls at 39 locations. Recently, high levels of corrosion were observed due to accidental discovery at two of these locations, specifically I-515/Flamingo Road and I-15/Cheyenne Avenue intersections. The resulting investigations of these walls produced direct measurements regarding the corrosion …
-
Evaluation of Electrochemical Corrosion, Electrodeposition, and Other Electroanalytical Methods as Investigative Forensic Techniques for Advancing Metal Substrate Analysis
… experiments. OCP measurements further provide corrosion potential values for various metal alloys, contributing to a comprehensive understanding of fingerprint resolution enhancement while preserving fingerprint integrity. Subsequent investigations employ potentiodynamic, potentiostatic, and …
-
Effect of Alloy Composition, Free Volume and Glass Formability on the Corrosion Behavior of Bulk Metallic Glasses
… and secondary phases in BMGs results in high corrosion resistance in many different environments. Understanding and tailoring the corrosion behavior can be significant for various structural applications in bulk form as well as coatings. In this study, the corrosion behavior of several …
-
Corrosion characteristics of seven metals in three aqueous environments for forensic applications
Corrosion characteristics of seven varieties of metals—zinc, brass C260, stainless steel 302, stainless steel 316, stainless steel 420, stainless steel 430, and stainless steel 440—in three aqueous media—Atlantic Ocean, Charles River, and deionized waters—were assessed via mass loss methods over 32 …
-
Electrochemical corrosion behaviour of nanostructured bainitic steel
… steels can influence their general and localized corrosion susceptibility. In this study, the corrosion behaviour of nanostructured bainitic steel was compared with the well-known martensitic steel in chloride-containing solution using electrochemical techniques such as electrochemical impedance …
-
Enhancing the corrosion resistance of a commercial magnesium alloy using polyaniline coating
… magnesium alloys has been hindered by their poor corrosion resistance. Generally, magnesium alloys containing low amounts of impurities (iron and silicon) have acceptable atmospheric corrosion resistance, but the corrosion resistance deteriorates in chloride-containing environments. Many surface …