Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 315 for “"Corrosion behavior"”.
-
Corrosion behavior of metallic bio-implant alloys
… These materials are biocompatible and have high corrosion resistance. However, metallic biomaterials are not completely inert in the body. The presence of dissolved oxygen, chloride, phosphate, and organic molecules in the body fluids could influence their corrosion behavior. Protein is one of …
-
Corrosion behavior of pipeline steel transporting diluted bitumen
An insufficient understanding of the corrosion, especially the internal corrosion, of diluted bitumen (referred to as “dilbit”) pipelines exacerbates the debate around new pipeline construction. This thesis elucidates the effects of important parameters, such as the presence of bitumen, chloride …
-
Corrosion Behavior of Nuclear Waste Storage Canister Materials
… steel containers and accelerate the oxidation (corrosion) of steel. It is of interest to identify if pertechnetate anions pose a corrosion hazard to the mild steel nuclear waste storage tanks, under the conditions of the storage sites, as that can accelerate the degradation of the tanks and lead …
-
CORROSION BEHAVIOR OF TUBULARS IN SOUR GAS ENVIRONMENT
… condition exacerbates the severity of tubular corrosion and increases the need for different corrosion mitigation methods. To avoid unnecessary cost of replacement or failure in these conditions, highly reliable materials and corrosion control strategies must be developed. Corrosion attacks …
-
Low-Temperature Aqueous Corrosion Behavior of Uranium Molybdenum Alloys
… in-reactor. One of these important conditions is corrosion, particularly that of fuel constituents. Therefore, corrosion behavior is of special interest and an essential part of nuclear materials characterization efforts. In support of the Office of Material Management and Minimization’s Reactor …
-
Corrosion Behavior of H-Pile Steel in Different Soils
This dissertation aimed to study the corrosion performance of carbon steel in different soils, collected from the state of Wisconsin. Carbon steel specimens (as-received) as well as steel embedded in mortar (steel-mortar) specimens, to simulate the realistic H-pile design in bridges, were used in …
-
Evaluation of cracking and localized corrosion behavior of cladding materials
… is focused on the evaluation of stress corrosion cracking (SCC), hydrogen embrittlement (HE) and localized corrosion (pitting and crevice) susceptibility of zircaloy-2 and zircaloy-4 in neutral and acidic solutions at 30, 60, 90°C. Constant-load and slow-strain-rate (SSR) testing …
-
CORROSION BEHAVIOR OF COLD SPRAYED ALUMINUM OXIDE REINFORCED ALUMINUM COATINGS
… spraying process has a significant impact in corrosion resistance. Recognition of this could provide the opportunity to adapt a wide range of coating deposits for different applications for repair in protection against corrosion. Cold sprayed coatings of pure aluminum and alumina reinforced …
-
Characterization of the corrosion behavior of high damping alloys in seawater.
Corrosion rates and the nature of corrosive attack were investigated for several high damping alloys, including alloys based on the Cu-Mn, Fe-Cr-Al, Fe-Cr-Mo, Ti-Ni, and Cu-Zn-Al systems. Rates and modes of attack were determined for exposure of samples in synthetic and natural seawater. The …
-
Soil corrosion behavior of hot-dipped galvanized steel in infrastructure applications
… relatively low cost paired with an acceptable corrosion resistance. Nevertheless, the early failure of a number of structures around the world that use galvanized steel has raised some controversy on the understanding of the corrosion behavior of zinc. This dissertation presents the results of …
-
Oxidation and hot corrosion behavior of gas turbine superalloys in steam
Master of Science (M.S.)
-
Corrosion Behavior on Mild Carbon Steel C1018 in Supercritical CO2 Environment
… part of this study was aimed to compare the corrosion rate predictions obtained from a state-of-the-art CO2 corrosion modeling with experimental results on mild carbon steel (C1018) exposed in brine solutions in both sub-critical CO2 and supercritical CO2 (SC-CO2) environments. Corrosion …
-
Effect of strain on general and localized corrosion behavior of steels
… structural applications have shown accelerated corrosion in areas with strain/deformation. During manufacturing, assembly and even during service, strain is inevitably introduced to metallic materials. Although pertinent prior research has concentrated on the stress corrosion cracking (SCC) and …
-
Corrosion Behavior of Additively Manufactured Alloy 625, A Nickel Based Superalloy
… remains a significant gap in research concerning corrosion behavior of wire-based methods. Most of the existing studies have predominantly focused on powder-based methods, leaving wire-based techniques relatively underexplored. This disparity in research attention highlights the need for …
-
Corrosion behavior of titanium-based materials produced by selective laser melting
… usually encounter the environment of corrosion, such as biomedical, aerospace, chemical implants, etc. Unfortunately, rare studies have addressed the corrosion behavior of the additive manufactured titanium products. The present corrosion studies on additive manufactured titanium …
Page 1 of 16