Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 174 for “"Corrosion performance"”.
-
Corrosion Performance of Concrete Cylinder Piles
… roller compacted process have shown promising corrosion durability in marine environments. Three bridges in the Florida Panhandle with approximately 40 years of service in aggressive marine service were examined. A newly constructed marine bridge utilizing concrete cylinder piles was also …
-
Corrosion Performance of Additively Manufactured Alloys and Hot Corrosion
… to Chapter 8 of this report are focused on the corrosion properties of the parts and coatings fabricated using the laser powder bed fusion based AM method or laser surface processing method, including a comprehensive review. Laser powder bed fusion based AM was used to prepare copper alloy, …
-
Corrosion Performance of MIG Welded Cu-lean AA7xxx Alloys
… was undertaken to better understand the corrosion behaviour of dissimilar welded Cu-lean AA7003 and AA7108 extrusions. The major variables under study were the heat-treated condition (as-welded T6 vs. as-welded T6+Paint Bake (PB)), extrusion alloy Cu composition (AA7003 vs. AA7108), weld …
-
Enhancing Corrosion Performance of Laser Modified NiTi Shape Memory Alloy
… in surface treatment, welding, and novel performance requirement applications. However, discrepancies arise regarding whether laser processing improves or degrades the corrosion performance of NiTi-based SMAs. This is a cause for concern over the reliability of the laser processed …
-
Corrosion performance of nickel based alloy in hydrogen iodine solution
In this thesis, the corrosion performance of some Ni-based super alloys including Inconel 625, Hastelloy X and Nickel 200 were investigated in HI solution at 70?and 100? at intervals of 24h, 48h, 96h and 192h respectively. Morphology and microstructure of corroded samples were analyzed using …
-
Corrosion performance of high damping alloys in 3.5% sodium chloride solution
The electrochemical nature of corrosion provides a means of determining an almost instantaneous corrosion rate. Corrosion rate and the nature of corrosion attack were investigated for several high damping alloys based on the Cu-Mn, Fe-Cr-Al, Fe-Cr- Mo, and Cu-Zn systems in 3.5% NaCl solution. The …
-
Corrosion Performance of Carbon and Galvanized Steel in Calcium Silicate Cement
… there is little to no information on its corrosion related durability. The investigation presented in this thesis considers two CSC formulations meanwhile also comparing different steel performances in the formulations. Previous work [23] assessed corrosion performance of CSC considering …
-
Effects of Surface Condition on the Corrosion Performance of Stainless Steel Rebar
Corrosion of carbon (black) steel reinforcing bars (rebar) is the major cause of damage and deterioration of reinforced concrete structures in maritime regions and in climates where de-icing salts are used. The cause of the corrosion is diffusion of chloride ions to the steel surface through the …
-
Durability and Corrosion Performance of Waterproofing Systems and Plant-Resin-Modified Concrete
… and freeze–thaw damage, leading to reinforcement corrosion, cracking, and serviceability loss. Surface-applied waterproofing systems—including penetrating sealers, polymer coatings, and crystalline treatments—are widely used to reduce capillary absorption; however, their effectiveness depends …
-
Anti-corrosion Performance of Primer and Top Coat Formulations for Metal Substrates
… interior and exterior applications. However, its corrosion resistance has room for improvement. The addition of sodium nitrite, an aminocarboxylate salt, and a zinc phosphate-based additive were all tested as corrosion inhibitors. In addition, during the project the coating binder was changed to …
-
The effect of acidity and salinity level in erosion-corrosion performance of metals
… of acidity and salinity levels on the erosion-corrosion behaviour of metallic materials used in the mining industry. In such environments, the level of both acidity and salinity significantly affects the alloys used for manufacturing either critical parts of pumps or pipelines that are subject …
-
Corrosion performance of an austenitic stainless steel fabricated by wire arc additive manufacturing.
… wrought and cast, likely changing the corrosion behaviour as well. This thesis investigates the corrosion behavior of WAAM deposited 316L stainless steel (SS) based on the consideration of the microstructure, with a focus on the effects of the solidification sequence, feedstock …
-
Corrosion Performance of Candidate Materials for Canadian Gen IV Supercritical Water Cooled Reactor
… (SCWR), a large body of knowledge in material’s performance under extreme conditions is needed. This thesis entails the corrosion characterization of four candidate materials, AISI 304, AISI 310, IN 625 and A-286, and subsequent microstructure evaluation of the materials after being exposed to …
-
Corrosion performance of coated steel bars in cracked and uncracked reinforced concrete beams
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2027-12-01
-
Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals
<p>It is generally recognized that hot cracking or microfissuring is one of the main concerns in austenitic stainless steel welding. Microfissures formation can be attributed to the presence of liquid film along the grain boundaries near the bulk solidus temperature under a sufficient strain to …
-
The Effect of Surface and Loading Conditions on the Corrosion Performance of Stainless Steel Rebar
… structures due primarily to chloride induced corrosion of plain carbon-steel reinforcement is a widespread problem, particularly in areas close to marine environments and where de-icing salts are used to keep roadways clear of ice. Replacing plain carbon-steel rebar with highly corrosion …
-
Effect of composition and microstructure on the oxidation and corrosion performance of Ni-based superalloys
… The influence of γ' size and composition on the corrosion behaviour of IN738LC was also investigated while maintaining a monomodal microstructure. Experimental results showed a negative influence on the corrosion resistance of IN738LC with an increasing rate of cooling, which is attributable to …
-
Effects of transient liquid phase bonding on corrosion performance of a single crystal aerospace superalloy
… extensively, there is little information on the corrosion behaviour of these special class of materials that had been subjected to TLP bonding. In this work, electrochemical assessment of the corrosion behaviour of TLP bonded nickel-based superalloy was performed. Microstructural evaluation of …
-
A Comprehensive Study on Atmospheric Corrosion Performance Evaluation of Austenitic Stainless Steel Nuclear Waste Container
This thesis studies localised corrosion mechanisms in Type 316L austenitic stainless steel under combined environmental, mechanical, and microstructural influences, focusing on chloride-rich atmospheres relevant to nuclear waste storage. The work combines experimental testing, microscopy, and …
-
Corrosion Performance of High Temperature Alloys in Molten Salt Mixtures for Next Generation Energy Systems
… for plant/system realization. In this work, two corrosion mitigation strategies are investigated to determine the relative corrosion performance of high temperature alloys in molten chloride salt mixtures: (1) chemical purification of salt mixture using a Mg sacrificial anode and (2) developing a …
Page 1 of 9