Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 106 for “"Corrosion testing"”.
-
Electrochemical corrosion testing of boronized and unboronized steels
… substantially. One of these properties is corrosion resistance. Corrosion resistance testing has been performed in many ways right from the traditional weight loss methods to the latest electrochemical techniques. These electrochemical techniques are more reliable and less time consuming …
-
Corrosion testing of alloys for biomass cookstove combustors
… longevity is challenging from a material corrosion perspective, particularly in the case of metallic combustors, because cookstove combustors must operate at high temperatures (> 600 deg. C) in environments with corrosive species released from biomass combustion. A key part of this …
-
Structural materials corrosion testing and modelling assessment in supercritical water
… medium. For components in SCWR designs, general corrosion is one of the most severe degradation modes. Numerous papers in the literature have considered the general corrosion of SCWR candidate materials. Unfortunately, tests have been conducted under various conditions. This work through …
-
CREVICE AND GALVANIC ATMOSPHERIC CORROSION TESTING OF CONTROL AND PROTOTYPE STEELS
… steel alloy, it is necessary to evaluate its corrosion performance which may vary depending on the composition and environment. This research investigated four steels consisting of a control steel, HY-100, and three prototype steels of a modified HSLA, 10Ni QQT, and 10Ni QQLT. Material …
-
Development of a corrosion testing method for hydrophobic coatings under hydrostatic pressure
Surface coatings used for corrosion prevention and inhibition are subjected to a wide range of dynamic mechanical and chemical conditions. Hydrophobic and superhydrophobic coatings are a class of coatings that have the unique ability to trap air at the interface between the coating and its …
-
Corrosion Testing and Modeling of Chloride-Induced Corrosion Deterioration of Concrete Bridge Decks
… involved visual inspections, damage surveys, corrosion testing including continuity, one-point resistivity, four-point resistivity, half-cell potentials, and three-electrode linear polarization, reinforcement cover depths, chloride samples. The Virginia bridge deck was built with epoxy-coated …
-
Stress Corrosion Cracking and Hydrogen Embrittlement Atmospheric Corrosion Testing of Control and Prototype Steels
… been designed with a focus on strength, their corrosion behavior is largely unknown and must be characterized prior to widespread application. This research involved the design of an experiment to test the stress corrosion cracking and hydrogen embrittlement susceptibility of HY-100, HSLA-150, …
-
Accelerated atmospheric, crevice, and galvanic corrosion testing of baseline and prototype naval high-strength steels
… naval steels such as HY-100, though their corrosion performance requires further evaluation to determine their suitability for long-term operational use. This research investigated the atmospheric, crevice, and galvanic corrosion behavior of these steels under controlled laboratory …
-
The polarization behavior of selected cathodic reactions used in corrosion testing of stainless steels and nickel base alloys
<p>The purpose of this study was to examine the electrochemical nature of three different acid solutions and to evaluate factors affecting the shape of the polarization curves. Potentiodynamic polarization curves were obtained for 10% hydrochloric acid, 50% sulfuric acid-0.1 <u>M</u> ferric …
-
Surface Engineering of Nitrided Stainless Steels and in Situ Irradiation–Corrosion Testing Methods for Molten Salt Reactor Applications
… situ characterization under coupled irradiation–corrosion conditions. First, a systematic nitridation and post-annealing matrix was established for 316H stainless steel to evaluate processing–microstructure–performance relationships in molten fluoride salt. Cathodic cage plasma nitriding produced …
-
Method Development for Corrosion Testing of Carbon Steel and Ni-based Alloy Coatings Exposed to Gas Hydrate Formation Environments
Gas hydrate formation and corrosion can cause serious safety and flow assurance problems in subsea environments. One aspect that has been given less attention is the corrosion behavior of materials in gas hydrate formation environment (GHFE). This work introduces a new technique/method for …
-
A preliminary investigation of the corrosion and stress-corrosion susceptibility of thermomechanically processed high magnesium aluminum magnesium alloys
The stress corrosion cracking susceptibility and general corrosion characteristics of four thermomechanically processed high-Magnesium, Aluminum-Magnesium alloys were evaluated and compared to those of 7076-T6. Results obtained from stress-corrosion testing and from tension testing after …
-
Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces
The accelerated corrosion of several carbon-fiber (CFRP) and E-glass/epoxy (GFRP) composite laminated aluminum alloys [i.e., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), & Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and aluminum …
-
Corrosion of Austenitic Stainless Steel
This thesis work focuses on the corrosion behaviour of austenitic stainless steel welds in chloride containing environments. The initial aim was to develop a new method for corrosion testing of welded austenitic stainless steel. The motivation for such work was that previous results indicated that …
-
Magnetron Sputtering and Corrosion of Ti-Al-C and Cr-Al-C coatings for Zr-alloy Nuclear Fuel Cladding
… March 2011 bought renewed focus to the issue of corrosion in nuclear fuel cladding applications. This thesis reports on the background behind these issues, the investigation strategy, and the analysis of experiments focused on mitigating oxidation of Zr-alloy fuel cladding. This thesis seeks to …
-
Design of high temperature and pressure electrochemical cell and corrosion chemistry of alloy 625 in high temperature and high pressure aqueous media using a two-electrode electrochemical method
… appropriate reactor materials to ensure that corrosion is minimized. Corrosion testing often requires an electrochemical approach for a comprehensive understanding of the range of behaviors exhibited from a corroding metal or alloy in different environments. Prior art of designs for …
-
Improved process procedures for upgrading and repair of high alloy and stainless castings
… and the Ni-base alloy, CW-6MC, in regard to corrosion response and weldability characteristics. Wrought counterpart materials, 254 SMO@reg;, AL-6XN®, Alloy 20® and Inconel Alloy 625®, were also included for comparison. The data base developed is significant and the conclusions reflect a …
-
Thermophysical and Molten Salt Corrosion Behavior of Structural Materials for Next-Generation Clean Energy Systems
… thermophysical properties and molten salt corrosion behavior of candidate structural alloys and aluminosilicate refractories for salt storage tanks, piping, and heat exchangers. Though these types of materials have been used in established applications (for example, aerospace and gas …
Page 1 of 6