Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 222 for “"Coulombic efficiency"”.
-
The morphology and coulombic efficiency of lithium metal anodes
… vinylene carbonate, which greatly improved the coulombic efficiency of lithium metal plating and stripping. The effect of gases, such as oxygen, nitrogen and carbon dioxide, on the SEI layer was also investigated. It was found that the presence of nitrogen and oxygen improved the coulombic …
-
Controlled prelithiation of PbS to Pb/Li₂S for high initial Coulombic efficiency in lithium ion batteries
… loss per cycle. However, its half cell initial Coulombic efficiency (ICE) was only 40%, due to a combination of irreversible Li₂S and solid electrolyte interface (SEI) formations. A custom controlled prelithiation technique was then applied to the PbS electrodes, converting the active material …
-
Synthesis of 5,6,11,12,17,18-hexaazatrinaphthylene Nanowires for Cathode Material in Lithium Battery
… such as high capacity, stable cycling and high coulombic efficiency. The molecules exhibit a capacity of about 260 mAh/g at a current density of 100 mA/g. In addition, the molecules afford a capacity of 200 mAh/g at a current density of 400 mA/g, and this performance has been tested 500 cycles. …
-
Ordered macroporous metal oxides and carbonaceous composites for Li-ion and beyond Li-ion batteries
… penetration, improved specific capacities and coulombic efficiency, and robust structural integrity during extended charge-discharge cycling. The study findings shed light on the unique advantages of inverse opal composites for application in next-generation battery technologies. Highly …
-
Polymer Electrolytes for Rechargeable Lithium/Sulfur Batteries
… about 80% over 40 cycles along with a high Coulombic efficiency. Comparative studies conducted with the 1 M LiTFSI liquid electrolyte cell demonstrated that a cell with liquid electrolyte has remarkably low capacity retention and Coulombic efficiency compared with the GPE cell. In the …
-
A study of electrolytes for rechargeable zinc-metal batteries
… of salt concentration on the stability and Coulombic efficiency of coin cells were also investigated. To explore the effects of additives sulfated cellulose nanocrystals (CNC) and sodium carboxymethyl cellulose (CMC) were added to the electrolyte and the characterization was performed once …
-
Separator Effects on Lithium Plating and Stripping Reversibility and Performance of High-Voltage Lithium metal batteries
… In Li|Cu cells, all separators exhibited high coulombic efficiency, but a reproducible separator dependence emerged, with cells using Celgard 2400 and Celgard 2500 polypropylene separators showing higher efficiency than those using the polyethylene separator and Celgard 2400 delivering the …
-
Improving Electrochemical Techniques for Studying Dissimilatory Metal Reducing Bacteria
… were addressed. Work was done to improve the coulombic efficiency of S. oneidensis in reactors by improving design of anoxic bioreactors. The new reactors were found to have < 3 ppm oxygen and showed no planktonic growth. The current density was also higher in new reactors (23 µA/cm2) compared …
-
A Study on Nano-Si/Polyaniline/Reduced Graphene Oxide Composite Anode for Lithium-Ion Batteries
… an initial capacity of 3259 mAh/g and 83.5% Coulombic efficiency. The new composite displayed better rate performance and capacity recovery than either nano-Si or n-Si/PANi. Structural and morphological studies combined with AC impedance analysis suggest that the n-Si/PANi/RGO composite has …
-
Artificial Solid Electrolyte Interface with Superhalogen-Based Double Antiperovskite Li6OS(BH4)2 Materials For Dentrite-Free and Stable Lithium Metal Batteries
… reactivity, which leads to dendrite growth, low coulombic efficiency, extreme volume fluctuation, and even safety concerns. For a stable and efficient lithium anode to build next generation Li metal battery, in this thesis, we have tried to solve these problems by incorporating an artificial …
-
Effect of Reaction Conditions on Electrically Wired Manganese Oxide-Carbon Nanocomposite Cathodes for Alkaline Zince Batteries
… of approximately 106 mAh g⁻¹ and an average Coulombic efficiency of 96% over 20 cycles, whereas the 100%-MnO₂@CNP (19.28 mg/cm2) electrode exhibited an average Coulombic efficiency of approximately 30%. From the analyses, improved capacities are obtained at lower mass loadings. This study, …
-
Operando Investigations of Deposition Mechanisms in Li-metal batteries
… of Li-metal batteries, such as a low coulombic efficiency (CE) and dendrite growth, which causes safety issues. To suppress dendrite growth and have high CE, uniform Li-metal deposition at charging is crucial. One of the approaches to obtain high CE is by optimizing the electrolyte …
-
Tin-based nanocomposite alloy anodes for lithium-ion batteries
… of 653 mAh g-1 (1384 mAh cm-3), an initial coulombic efficiency of 85%, and a tap density of 1.8 g cm-3. The FeSn2-TiC alloy shows an initial gravimetric capacity of 510 mAh g-1 (1073 mAh cm-3), an initial coulombic efficiency of 71%, and a tap density of 2.1 g cm-3. The TiC-C buffer matrix …
-
Novel manufacturing routes for solid-state batteries
… capacity degradation during cycling and a Coulombic efficiency > 98% after 100 cycles. The greater uniformity of Li plating was revealed by cross-sectional microscopy, and a mechanism proposed.<br><br>Building on these findings, two alternative, novel Ag/C interlayer processing techniques …
-
Barley Husk as a Multifunctional Biomass Precursor for Silica/Carbon Composite Anodes in Rechargeable Lithium-ion and Sodium-ion Batteries
… 87.9% of its capacity after 400 cycles, with coulombic efficiency rising above 98% after the initial formation period. The initial Coulombic efficiency (~60%) is limited by irreversible lithium consumption associated with solid-electrolyte interphase (SEI) formation and partial SiO2 …
-
Development and characterisation of an aqueous aluminium-ion battery
… cell was capable of 1750 cycles with energy efficiency remaining between 70-80% when cycled at a 20 C rate. Degradation of the CuHCF electrode resulted in cell failure, though this in turn was shown to be a result of the <100% coulombic efficiency of TiO<sub>2</sub>. TiO<sub>2</sub> …
-
Electro-reduction of bromate on mercury
… and basic solutions containing K⁺, Na⁺, and L⁺. Coulombic efficiency studies showed Br⁻ to be the predominant reduction product. The steady state kinetic parameters include Tafel slopes of ca. -0.120 V, approximate first order activity dependences for both BrO⁻₃ and the accompanying cation, and …
-
MICROBIAL FUEL CELL OPERATION AND USE WITH ANAEROBIC DIGESTION FOR POWER PRODUCTION FROM DAIRY MANURE
… and killed at thermophillic temperatures. Coulombic efficiency also increased from 3.4+-1.2% to 5.8+-1.4% when the temperature was increased from 20 to 37 oC. MFCs were combined with AD. AD bottles were measured for total biogas production and composition during a 45 day period at 37 oC. …
-
Pressure-induced chemo-mechanical effects on sodium metal battery anodes and the application on designing high-efficiency anode-free sodium batteries
… sodium metal batteries. However, achieving high Coulombic efficiency (CE) and cycling stability remains challenging for this battery architecture. This study investigated the impact of pressure on sodium metal deposition and Coulombic efficiency (CE) for the AFNMBs. Firstly, we demonstrate that …
-
Development of Metal Oxide Based Materials for Li-ion Batteries : From Titania to Titanates
… initial discharge capacity and 19.0% higher Coulombic efficiency than the pristine LNMO. Lithium titanate (LTO) nanoparticles with different levels of oxygen vacancy were synthesized. Battery testing and computational simulation were employed to investigate the relationship between oxygen …
Page 1 of 12