Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Coupon Tests"”.

  1. A method for developing the true stress-strain relationship for structural steels based on tension coupon tests

    … up to fracture. In addition, as standard tension coupon load-deformation data are often the only available information from which to develop such a model, the processes and guidance presented in this dissertation require only that input information. Therefore, advanced experimental approaches and …

    texas Repository record for A method for developing the true stress-strain relationship for structural steels based on tension coupon tests (opens in a new tab)

  2. Flexural Strength and Behavior of Timber-Concrete Composite Floors with Hexagonally Headed Self-Tapping Screw Shear Connectors

    … shear connectors. To accomplish the objective, coupon specimens and full-scale TCC floor panels were tested, and a finite element modelling approach was developed. The coupon tests were used to determine the stiffness of the shear connection and to determine the effect of the screw …

    byu Repository record for Flexural Strength and Behavior of Timber-Concrete Composite Floors with Hexagonally Headed Self-Tapping Screw Shear Connectors (opens in a new tab) Download PDF for Flexural Strength and Behavior of Timber-Concrete Composite Floors with Hexagonally Headed Self-Tapping Screw Shear Connectors (opens in a new tab)

  3. Numerical Modelling and Experimental Investigation of CFRP Structures for Large Deformations

    … that need to be calibrated through either coupon tests or actual crash tests. As composite structures become more commonly used in automotive industry, it is necessary to set some guidelines to successfully model and simulate composite crashworthy structures. The numerical modelling was …

    iupui Repository record for Numerical Modelling and Experimental Investigation of CFRP Structures for Large Deformations (opens in a new tab)

  4. Material models and crash simulations in LS-DYNA: Development of virtual test laboratory

    … study was carried out in two phases. Initially, coupon tests were simulated using solid fine elements which were finally validated against the experimental results in order to achieve better accuracy. A input flow curve was calibrated from the uniaxial tension test simulations using optimisation …

    chalmers Repository record for Material models and crash simulations in LS-DYNA: Development of virtual test laboratory (opens in a new tab)

  5. Modeling of Spot Weld with Failure for Crash Simulations

    … achieving the aforementioned objective. Three coupon tests (peel, lap shear and u-tension) are taken as standard test to validate the developed models. One of the approaches is developing a model that represents spot weld as beams. The results for the 5-beam, 8-beam, 9-beam method were varying. …

    chalmers Repository record for Modeling of Spot Weld with Failure for Crash Simulations (opens in a new tab)

  6. A study of joint slip in galvanized bolted angle connections

    … in compression and incorporated nine joint tests; (ii) Test Series B, which dealt with a web bracing member joint loaded in tension and incorporated nine joint tests; (iii) Test Series C, which dealt with a joint of low load carrying capacity and high eccentricity loaded in compression and …

    manitoba Repository record for A study of joint slip in galvanized bolted angle connections (opens in a new tab)

  7. Effects of Shallow Bi-Angle, Thin-Ply Laminates on the Structural Performance of Composite Wings

    … bring to fiber reinforced polymer composites. Coupon- and structural-level tests are conducted along with numerical simulations. According to the coupon tests, we find that shallow bi-angle fibers and thin plies can increase the axial stiffness of laminates significantly at the cost of …

    washington Repository record for Effects of Shallow Bi-Angle, Thin-Ply Laminates on the Structural Performance of Composite Wings (opens in a new tab)

  8. Plastic behaviour and buckling of rolled structural steel members under compression and bending

    … the cross section of the member as determined by coupon tests. ii - Development of strain over the cross section of the member, as measured by electric strain gauges, when subjected to a) Axial loading, b) Bending Moment. iii - The effect of previous loading of a member as a column into the region …

    ubc Repository record for Plastic behaviour and buckling of rolled structural steel members under compression and bending (opens in a new tab) Download PDF for Plastic behaviour and buckling of rolled structural steel members under compression and bending (opens in a new tab)

  9. Durability modeling and design of a helicopter rotor Tie Bar

    … desired life and reliability levels. Laboratory coupon tests were interpreted to provide material properties for several manufacturing processes. Finite element analysis of the current Tie Bar design as well as two modified designs was used to determine the Tie Bar stress state for many component …

    nps Repository record for Durability modeling and design of a helicopter rotor Tie Bar (opens in a new tab)

  10. Flexural Behavior of Cold-Formed and Hot-Rolled Steel Sheet Piling Subjected to Simulated Soil Pressure

    … to the corresponding yield stress from tensile coupon tests to make a meaningful comparison. The results indicate that transverse stresses influence the flexural capacity of the sheet pilings. The longer span length has less amount of transverse strains, resulting in a higher moment capacity. …

    vt Repository record for Flexural Behavior of Cold-Formed and Hot-Rolled Steel Sheet Piling Subjected to Simulated Soil Pressure (opens in a new tab)

  11. Acoustic emission signature analysis of failure mechanisms in fiber reinforced plastic structures

    … to additional AE data from full-scale and coupon tests. By comparing the results from the network with visually observed damage, the network results are shown to be very reliable in determining failure mechanisms.

    texas Repository record for Acoustic emission signature analysis of failure mechanisms in fiber reinforced plastic structures (opens in a new tab)

  12. Structural behaviour of cold-formed steel built-up stiffened box sections under bending, axial compression and web crippling

    … and web crippling. In total, 38 experimental tests were conducted, covering bending tests, axial compression tests, and web crippling tests. The material properties of test specimens were obtained from tensile coupon tests. Nonlinear finite element (FE) models were also developed and validated …

    auckland-ms Repository record for Structural behaviour of cold-formed steel built-up stiffened box sections under bending, axial compression and web crippling (opens in a new tab)

  13. A Low Cycle Fatigue Testing Framework for Evaluating the Effect of Artifacts on the Seismic Behavior of Moment Frames

    … hinge regions using relatively economical coupon tests. Cyclic bend tests and monotonic tension tests on flat plate coupons that include artifacts are used to calibrate fracture parameters for different low cycle fatigue models such as the Cyclic Void Growth Model (CVGM), Stress-Weighted …

    vt Repository record for A Low Cycle Fatigue Testing Framework for Evaluating the Effect of Artifacts on the Seismic Behavior of Moment Frames (opens in a new tab)

  14. Study on Ductile Fracture with Anisotropic and Strain Rate Effects in Manufacturing Processes

    … present modeling framework is calibrated from coupon tests of aluminum alloy and advanced high strength steel (AHSS) sheets using digital image correlation (DIC) technique and validated through correlations by finite element (FE) simulations. This study also demonstrates the applications of …

    ucf Repository record for Study on Ductile Fracture with Anisotropic and Strain Rate Effects in Manufacturing Processes (opens in a new tab)

  15. Structural Evaluation of Hybrid Double-Lap Shear Bolted Connections Incorporating Additively Manufactured 316L Stainless Steel Inner Plates

    … manufacturing and selective laser melting. The tests were designed to invoke failure at the inner plates, while additive manufacturing-related material properties, surface undulations and thickness variation can further influence the failure mechanism. The study integrates experimental testing …

    whiterose Download PDF for Structural Evaluation of Hybrid Double-Lap Shear Bolted Connections Incorporating Additively Manufactured 316L Stainless Steel Inner Plates (opens in a new tab)

  16. Assessment of Current ACI 440.2R-08 Design Guidelines and Evaluation of Hoop Strain in FRP Confined Concrete

    … guidelines. The results from 694 compression tests are compared to the predicted maximum confined compressive strength following the ACI 440.2R-08 design formulas. The investigation showed that for CFRP- wrapped plain concrete specimens the design formulas work reasonably well, 82% of the …

    texas-state Repository record for Assessment of Current ACI 440.2R-08 Design Guidelines and Evaluation of Hoop Strain in FRP Confined Concrete (opens in a new tab)

  17. Mechanical Behaviour of Cold-formed Hollow Structural Section Material

    … were investigated by performing tensile coupon tests, stub column tests, and residual stress measurements. Analytical column curves were generated to reflect their compression behaviour, based on the experimental results. It was found that, in general, the static properties of a …

    toronto-retro Repository record for Mechanical Behaviour of Cold-formed Hollow Structural Section Material (opens in a new tab)

  18. Residual life assessment of composite structures: with application to all weather lifeboats

    … the fatigue life of the materials through coupon tests, understanding the environmental conditions and the errors involved in predicting them and carrying out measurements of the structural response of a Severn class lifeboat whilst in service. Combining these variables using Monte Carlo …

    soton Download PDF for Residual life assessment of composite structures: with application to all weather lifeboats (opens in a new tab)

  19. Modeling and application of thin-walled composite beams in bending and torsion.

    … The laminate stiffnesses are verified by coupon tests in tension and torsion, and the beam stiffnesses are verified by 3-point, 4-point, and cantilever bending tests. The harmonic analysis technique of beams is used to develop a shear lag model for open and closed composite beam sections. …

    wvu Repository record for Modeling and application of thin-walled composite beams in bending and torsion. (opens in a new tab)

  20. Multi-scale nonlinear constitutive models using artificial neural networks

    … behavior. Towards that goal, nanoindentation tests have been performed for silicon (Si) substrate with/without a copper (Cu) film. Nanoindentation creep test data, available in the literature for Polycarbonate substrate, are used in these inverse problems. The predicted properties from the ANN …

    gatech Repository record for Multi-scale nonlinear constitutive models using artificial neural networks (opens in a new tab)

Page 1 of 3