Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 177 for “"Crack Closure"”.

  1. Crack Closure Measurement by the Optical Method of Caustics

    … of caustics as a tool to study the role of crack closure in fatigue crack propagation. The technique has been applied to centre-cracked panel specimens of 2024-T3 aluminium alloy under a range of fatigue loading conditions which are expected to induce crack closure to varying degrees. …

    the-open-u Download PDF for Crack Closure Measurement by the Optical Method of Caustics (opens in a new tab)

  2. The Study of Crack Closure Phenomenon Following One Tensile Overload

    … overload was applied, it is shown that from the crack-growth rate (da/dN) versus stress-intensity-factor range (K) curve, the crack-growth rate decreased, following the overload, which indicated the crack-closure phenomenon. The crack-growth-retardation period was observed after the overload. The …

    utk-theses Repository record for The Study of Crack Closure Phenomenon Following One Tensile Overload (opens in a new tab)

  3. Plasticity-Induced Fatigue Crack Closure For Structural Steels In Offshore Applications.

    … and numerically the plasticity-induced fatigue crack closure (PIFCC) behavior in S355 offshore structural steels through large-scale in-plane bending fatigue tests of circular hollow section (CHS) X-joints and small-scale fatigue tests of C(T) and M(T) fatigue specimens. The full-scale testings …

    nus Repository record for Plasticity-Induced Fatigue Crack Closure For Structural Steels In Offshore Applications. (opens in a new tab) Download file for Plasticity-Induced Fatigue Crack Closure For Structural Steels In Offshore Applications. (opens in a new tab)

  4. Modelling of Fatigue Crack Closure via the Concept of Plastic Inclusions

    The phenomenon of closure is one of the most important phenomena that have been linked to the deeper understanding of fatigue cracks. Various methods have been employed to model the plastic zone around the crack tip which appears to give rise to the closure phenomena. In this thesis, our goal is to …

    plymouth Repository record for Modelling of Fatigue Crack Closure via the Concept of Plastic Inclusions (opens in a new tab)

  5. Finite element and analytical modelling of roughness induced fatigue crack closure

    <p>The incidence of roughness induced fatigue crack closure has been studied by finite element and analytical modelling. Results of the finite element model under constant amplitude show: (1) an increasing effect of crack deflection angle on crack closure levels, consistent with the simple …

    soton Download PDF for Finite element and analytical modelling of roughness induced fatigue crack closure (opens in a new tab)

  6. Plasticity-induced fatigue crack closure: an investigation using digital image correlation

    … near tip displacement fields of fatigue cracks in 6082 T6 aluminium alloy. The experimental work is focused on building from recent work done by de Matos and Nowell to directly measure fatigue crack closure with surface displacements obtained through DIC analysis. In this work, similar …

    oxford Repository record for Plasticity-induced fatigue crack closure: an investigation using digital image correlation (opens in a new tab)

  7. A crack closure model and its application to vibrothermography nondestructive evaluation

    … by which vibrations are converted to heat at the crack surface. It has been shown that crack closure and closure state impact the resulting heat generation [39; 55; 56]. Despite this, research into the link between partial crack closure and vibrothermography is limited [40; 55; 56].</p> <p>This …

    iastate Repository record for A crack closure model and its application to vibrothermography nondestructive evaluation (opens in a new tab)

  8. A crack closure model and its application to vibrothermography nondestructive evaluation

    … by which vibrations are converted to heat at the crack surface. It has been shown that crack closure and closure state impact the resulting heat generation [39; 55; 56]. Despite this, research into the link between partial crack closure and vibrothermography is limited [40; 55; 56].</p> <p>This …

    iastate Repository record for A crack closure model and its application to vibrothermography nondestructive evaluation (opens in a new tab)

  9. A dislocation model of plasticity with particular application to fatigue crack closure

    <p>The ability to predict fatigue crack growth rates is essential in safety critical systems. The discovery of fatigue crack closure in 1970 caused a flourish of research in attempts to simulate this behaviour, which crucially affects crack growth rates. Historically, crack tip plasticity models …

    oxford Repository record for A dislocation model of plasticity with particular application to fatigue crack closure (opens in a new tab)

  10. An Analytical Model Which Combines Roughness- and Plasticity- Induced Fatigue Crack Closure

    … using the PICC-RICC model. The initial crack length (a$\rm\sb{i})$ for propagation was estimated. The predicted notch fatigue strength compared favorably with the Initiation-Propagation (I-P) Model prediction and test data. The existence of a ""worst case notch"" previously postulated …

    uiuc Repository record for An Analytical Model Which Combines Roughness- and Plasticity- Induced Fatigue Crack Closure (opens in a new tab)

  11. Fatigue Crack Closure and Crack Growth Outside the Small Scale Yielding Regime

    Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1988.

    uiuc Repository record for Fatigue Crack Closure and Crack Growth Outside the Small Scale Yielding Regime (opens in a new tab)

  12. A crack closure study on 2024 T351 aluminum alloy by the Moire method

    <p>The validity of measuring crack opening displacements by using the high sensitivity Moire interferometry technique was evaluated. The stress intensity factor determination using the crack opening displacements was studied. The data on the crack opening displacement were used to obtain the …

    iastate Repository record for A crack closure study on 2024 T351 aluminum alloy by the Moire method (opens in a new tab)

  13. Three-dimensional effects of crack closure in laminated composite plates subjected to bending loads

    … loads. Stress and deformation fields around the crack tip are important to understand the crack propagation and arrest. For a plate with a through-the-thickness crack and subjected to a bending load, there is crack closure on the compression side of the crack face. The present study investigates …

    nps Repository record for Three-dimensional effects of crack closure in laminated composite plates subjected to bending loads (opens in a new tab)

  14. Investigation of thermal effects on fatigue crack closure using multiscale digital image correlation experiments

    … length scales, the thermal effects on fatigue crack closure of Hastelloy X, a nickel-based superalloy. Using multiscale, digital image correlation (DIC), macroscale experiments were performed at 2x magnification (2 µm/pix), providing full-field crack closure measurements. Microscale experiments …

    uiuc Repository record for Investigation of thermal effects on fatigue crack closure using multiscale digital image correlation experiments (opens in a new tab)

  15. A crack closure model for the fatigue behavior of notched components and welded joints

    "Newman's Dugdale strip-yield model for crack closure was modified to estimate the crack-closure behavior of cracks emanating from notches. The results obtained using this crack-tip plastic deformation model showed that the estimated effective stress-intensity ratio $U(a)$ (=$\Delta K\sb{\rm …

    uiuc Repository record for A crack closure model for the fatigue behavior of notched components and welded joints (opens in a new tab)

  16. Effects of Overload and Underload on Internal Strains/Stresses and Crack Closure during Fatigue-Crack Propagation

    … occurring during constant-amplitude fatiguecrack growth result in the retardation and/or acceleration in the crack-growth rate, making it difficult to predict the crack-propagation behavior and fatigue lifetime. Although there have been numerous investigations to account for these transient …

    utk-theses Repository record for Effects of Overload and Underload on Internal Strains/Stresses and Crack Closure during Fatigue-Crack Propagation (opens in a new tab)

  17. The application of fracture mechanics to Mode I interfacial ice delamination and plasticity induced crack closure

    … interfacial fracture toughness for a crack under mode I loading. The second application details plasticity-induced crack closure for surface fatigue cracks under mode I loading using surface displacement analysis to calculate the residual stress distribution and crack opening levels. …

    iastate Repository record for The application of fracture mechanics to Mode I interfacial ice delamination and plasticity induced crack closure (opens in a new tab)

  18. High resolution fatigue crack growth analysis of crack closure and slip irreversibility using digital image correlation

    Crack closure and slip irreversibility in the fatigue crack growth of 316L stainless steel were investigated using digital image correlation (DIC). A polycrystalline and a oriented specimen were tested to study mode I fatigue crack growth, while oriented specimens were used to study mixed mode (I …

    uiuc Repository record for High resolution fatigue crack growth analysis of crack closure and slip irreversibility using digital image correlation (opens in a new tab)

Page 1 of 9