Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"Crack Density"”.

  1. Average antiplane motion in an elastic solid containing a layer of randomly distributed cracks

    … solid containing a random distribution of cracks that are parallel to each other, and oriented at an arbitrary angle relative to the direction of the incident wave, is considered. The approach, which is new, is based on the system of integral equations that describes the motion of a solid …

    rice Repository record for Average antiplane motion in an elastic solid containing a layer of randomly distributed cracks (opens in a new tab)

  2. EFFECT OF FLUSHING PRESSURE ON ELECTRO-DISCHARGE MACHINING AND RESULTANT SURFACE CHARACTERISTICS

    … performance, recast layer morphology and cracking propensity. AISI 01 tool steel and a high-energy machining condition were used in the present work. The flushing pressure was varied from 10 to 110 kPa in steps of 10kPa. The results show the flushing pressure effort can be divided into …

    nus Repository record for EFFECT OF FLUSHING PRESSURE ON ELECTRO-DISCHARGE MACHINING AND RESULTANT SURFACE CHARACTERISTICS (opens in a new tab) Download file for EFFECT OF FLUSHING PRESSURE ON ELECTRO-DISCHARGE MACHINING AND RESULTANT SURFACE CHARACTERISTICS (opens in a new tab)

  3. Enviro-Mechanical Durability of Graphite/Epoxy Composite Materials

    … was reduced by both temperature and moisture. Crack density with fatigue cycles was found to decrease with temperature but increase for immersed fatigue. Testing also revealed discrepancies between the edge replication and radiography methods for determining crack density. The analytical phase …

    vt Repository record for Enviro-Mechanical Durability of Graphite/Epoxy Composite Materials (opens in a new tab)

  4. Effect of microcracking on strength and durability of low water-to-cement ratio concretes

    Concrete is prone to cracking, and thus, numerous studies have been conducted to determine the critical crack width, especially when concerns regarding serviceability are warranted. With most of these studies being conducted on single cracks, the effect of crack density has been largely ignored. …

    texas Repository record for Effect of microcracking on strength and durability of low water-to-cement ratio concretes (opens in a new tab)

  5. Development of lunar ceramic composites, testing and constitutive modeling, including cemented sand

    … velocity based disturbances as well as crack density are described in this dissertation. The first segment of the investigation involves new molding methods, development of tension testing setup, uniaxial compression and tension testing of ICC. Results showed that strength and ductility …

    arizona-thes Repository record for Development of lunar ceramic composites, testing and constitutive modeling, including cemented sand (opens in a new tab)

  6. Propagation of antiplane waves in an elastic solid containing a distribution of parallel cracks

    … solid that contains a distribution of flat cracks is considered. The cracks are parallel to each other, the distribution is dilute, and a wave is obliquely incident on the planes of the cracks. It is assumed that the multiple scattering produces a coherent wave that loses energy as it …

    rice Repository record for Propagation of antiplane waves in an elastic solid containing a distribution of parallel cracks (opens in a new tab)

  7. A micromechanical model for the nonlinearity of microcracks in random distributions and their effect on higher harmonic Rayleigh wave generation

    … of randomly distributed surface-breaking microcracks and their effects on higher harmonic generation in Rayleigh surface waves. The modeling is based on micromechanical considerations of rough surface contact. The nonlinear behavior of a single microcrack is described by a hyperelastic …

    gatech Repository record for A micromechanical model for the nonlinearity of microcracks in random distributions and their effect on higher harmonic Rayleigh wave generation (opens in a new tab)

  8. Correlstion between the volume of slurry and the volume of fracture in Barnett Shale

    … of the hydraulic fracture will establish the crack density. The graphic result of the correlation between the volume of slurry and the estimated volume of fracture showed that the crack density increases when the volume of the fracture increases. The crack density is always less than 1 due to …

    houston Repository record for Correlstion between the volume of slurry and the volume of fracture in Barnett Shale (opens in a new tab)

  9. Analysis of Composite Laminates with Matrix Cracks

    Analysis of the effects of matrix cracking on composite laminates is a well-known problem which has attracted considerable attention for the past decade. An approximate analytical solution is introduced in this thesis to study this type of problem. The subjects of primary concern are the …

    vt Repository record for Analysis of Composite Laminates with Matrix Cracks (opens in a new tab)

  10. Solidification Cracking in Binary Al-Cu Alloys Additively Manufactured through Laser Powder Bed Fusion

    … alloys with a high susceptibility to micro-cracking during solidification cannot be feasibly manufactured through LPBF, such as in selected high-strength Al-alloys. The cracking susceptibility (CS) of Al-alloys varies with composition, so modeling CS with respect to composition is crucial in …

    ucf Repository record for Solidification Cracking in Binary Al-Cu Alloys Additively Manufactured through Laser Powder Bed Fusion (opens in a new tab)

  11. Damage analysis of laminated composite beams under bending loads using the layer-wise theory

    … to determine the influence of transverse cracks on a laminate is proposed. In the meso-scale model, the finite element model based on the classical laminate theory provides the material stiffness reduction in terms of the crack density by computing homogenized material properties of the …

    tamu Repository record for Damage analysis of laminated composite beams under bending loads using the layer-wise theory (opens in a new tab)

  12. Amplitude inversion of fast and slow converted waves for fracture characterization of the Montney Formation in Pouce Coupe field, Alberta, Canada

    … splitting parameter that is closely related to crack density. Since crack density has a significant impact on defining the percolation zone, the work presented in this thesis provides information that can be utilized to reduce uncertainty in the reservoirs fracture model. Isotropic AVO inversion …

    colo-mines Repository record for Amplitude inversion of fast and slow converted waves for fracture characterization of the Montney Formation in Pouce Coupe field, Alberta, Canada (opens in a new tab)

  13. EFFECT OF MATERIAL CONTRAST ON ANISOTROPY AND DISPERSION OF LAYERED PERIODIC MEDIUM

    … the media are constructed. For the case in which crack density is very high and aspect ratio may be very low, the cracked medium can be described as a layered periodic medium, in which the aligned fractures in question are described as layers. Given a layered periodic medium consisting of all …

    houston Repository record for EFFECT OF MATERIAL CONTRAST ON ANISOTROPY AND DISPERSION OF LAYERED PERIODIC MEDIUM (opens in a new tab)

  14. Shear Wave Splitting Inversion in a Complex Crust

    … the upper crust can be interrogated for fracture density. It is caused when a shear wave traverses an area of anisotropy, splits in two, with each wave experiencing a different velocity resulting in an observable separation in arrival times. The current body of work on linear SWS inversion …

    auckland-ms Repository record for Shear Wave Splitting Inversion in a Complex Crust (opens in a new tab)

  15. SPATIAL CORRELATION FUNCTION AND SPECIFIC PROBLEMS OF RESERVOIR STRUCTURE

    … ratio and the length of inclusion constant, the crack density increases with the increase of gas content. As gas content increases the crack density increases from 0.08 at one percent of gas to 0.796 at 10 percent of gas at constant aspect ratio value of 0.03. Comparison with experimental data …

    houston Repository record for SPATIAL CORRELATION FUNCTION AND SPECIFIC PROBLEMS OF RESERVOIR STRUCTURE (opens in a new tab)

  16. Improvement of a Multiscale Framework for the Analysis of Composite Materials

    … The volume average stress-strain response, the crack density evolution, and a metric developed using two-point correlation functions were used to quantify the similarities and differences of the progressive damage models. For a laminate under uniaxial tension, a continuum damage model that …

    tamu Repository record for Improvement of a Multiscale Framework for the Analysis of Composite Materials (opens in a new tab)

  17. Finite element analysis of damaged cross-ply composite laminates

    The problem of transverse cracks in T300/5208 graphite-epoxy cross-ply laminates was studied using generalized plane strain finite element analysis. The degradation of elastic modulus, Poisson's ratio, shear modulus, and coefficient of thermal expansion was predicted and then compared with …

    vt Repository record for Finite element analysis of damaged cross-ply composite laminates (opens in a new tab)

  18. Scattering of antiplane waves by fluid-filled cracks

    … solid containing parallel fluid-filled cracks is investigated. The viscous friction effects are represented by appropriate boundary conditions on the crack faces. The cracks are randomly distributed in a slab of finite thickness. Taking configurational averages over all crack …

    rice Repository record for Scattering of antiplane waves by fluid-filled cracks (opens in a new tab)

  19. Thermal Cycle Effects on Laminated Composite Plates Containing Voids

    … this work, the influence of voids on the micro-crack formation, under thermal cycles and environmental conditions, were investigated and analyzed. Thermal cycle experiments were performed using liquid nitrogen and oven followed by microscopic observation of the polished cross-section of the 900 …

    concordia Download PDF for Thermal Cycle Effects on Laminated Composite Plates Containing Voids (opens in a new tab)

  20. Thermal Cycling of Composite Honeycomb Sandwich Structure for Space Application

    … One of the most common types of defect is microcracking. This thesis aims to study the effect of thermally induced microcracks on the mechanical property of the composite honeycomb sandwich structure. Composite honeycomb sandwich structure with Kevlar core and facesheet made of carbon fiber/ …

    concordia Download PDF for Thermal Cycling of Composite Honeycomb Sandwich Structure for Space Application (opens in a new tab)

Page 1 of 5