Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 275 for “"Crack Formation"”.

  1. Crack formation in chocolate pralines

    … water or liquor based fillings, could result in cracking of the shell. Cracking is one of the major issues that lead to reduced shelf life in chocolate pralines. The main suggestions for crack formation are that cracks form due to moisture or ethanol migration through the chocolate shell, or due …

    chalmers Repository record for Crack formation in chocolate pralines (opens in a new tab)

  2. Thermal contraction and crack formation in frozen soil

    Thesis (Ph. D.)--Michigan State University. Department of Civil and Environmental Engineering, 1988

    msu Repository record for Thermal contraction and crack formation in frozen soil (opens in a new tab)

  3. Thermomechanical fatigue crack formation in nickel-base superalloys at notches

    … are potential sites of localized inelastic deformation and crack formation. To reduce customer costs associated with unnecessary overhauls or engine down-time, gas turbine manufacturers require accurate prediction methods to determine component endurances. The influence of stress concentration …

    gatech Repository record for Thermomechanical fatigue crack formation in nickel-base superalloys at notches (opens in a new tab)

  4. Thermomechanical fatigue crack formation in a single crystal Ni-base superalloy

    … operating regimes. Particularly, the proposed deformation model accounts for the materials' coupled fatigue-environment-microstructure response to TMF loading. Because the proposed model is be based upon the underlying deformation physics, the model is robust enough to be easily modified for …

    gatech Repository record for Thermomechanical fatigue crack formation in a single crystal Ni-base superalloy (opens in a new tab)

  5. Detailed Studies of Drying and Crack Formation in Aggregated Colloidal Suspensions

    … In particular, they control the shape and deformation behavior during drying of these suspensions. We identify a single dimensionless group Q¯ that can be used to predict drying behavior. We use a two-phase fluid model with the compressive yield stress constitutive equation to describe …

    uiuc Repository record for Detailed Studies of Drying and Crack Formation in Aggregated Colloidal Suspensions (opens in a new tab)

  6. Heat tranfser and crack formation in water-cooled zinc fuming furnace jackets

    … bath. However, the jackets are known to develop cracks in the working face panel that initiate on the slag face and propagate towards the water cavity. If the cracks reach the water cavity explosions may result should the molten slag come into contact with the water. In this study an analysis of …

    ubc Repository record for Heat tranfser and crack formation in water-cooled zinc fuming furnace jackets (opens in a new tab) Download PDF for Heat tranfser and crack formation in water-cooled zinc fuming furnace jackets (opens in a new tab)

  7. Investigation of panel crack formation in steel ingots using mathematical and physical models

    An investigation of panel crack formation in steel ingots was undertaken to improve understanding of the mechanisms by which they develop and to evaluate possible solutions to the problem. The investigation revealed that two distinct types of panel cracks, both of which are partly caused by …

    ubc Repository record for Investigation of panel crack formation in steel ingots using mathematical and physical models (opens in a new tab) Download PDF for Investigation of panel crack formation in steel ingots using mathematical and physical models (opens in a new tab)

  8. Experimental investigation on crack formation in filter cakes with wide particle size distribution

    … of this thesis is to find out the mechanism of cracking formation during filtration as well as improve the dewatering efficiency of Limestone and Vietnam coal. They are both fine materials, which negatively affect the filtration process. Experiments are executed by changing parameters like solid …

    qucosa-diss

  9. Galvanizing crack formation at base plate to shaft welds of high mast illumination poles

    … arisen from the discovery of extensive premature cracking at the toes of base plate to pole shaft welds of poles currently in service. These cracks, in some cases, have become so severe that HMIPs have actually collapsed, and therefore present a great threat to public safety. Previous research at …

    texas Repository record for Galvanizing crack formation at base plate to shaft welds of high mast illumination poles (opens in a new tab)

  10. Micromechanical Modelling of Local Failure and Ply Crack Formation in Fiber-Reinforced Plastic Laminates

    … quasi-static and cyclic loading begins with formation and multiplication of ply (intralaminar) cracks. Physically, ply cracks form due to the linkage of local failures at the microscale, while they can influence the behaviour of the material at larger scales. The overall goal of the thesis is …

    waterloo Repository record for Micromechanical Modelling of Local Failure and Ply Crack Formation in Fiber-Reinforced Plastic Laminates (opens in a new tab)

  11. Discrete Element based numerical simulation of crack formation in brittle material by swelling cement

    … based on the comparison with lab tests, that crack propagation, fracture pattern as well as stress-strain behavior of brittle solids can be duplicated by calibrated Voronoi based DEM simulations. The thesis also documents a swelling law for the DEM code UDEC including parameter determination …

    qucosa-diss

  12. Influence of electrical discharges on white etching crack formation and their detection using electrostatic sensing technique

    … has been substantially affected by the formation of white etching crack (WEC). WECs are networks of cracks formed in rolling element bearings that extend several millimetres beneath the surface with microstructural change called white etching area (WEA), which can cause a bearing failure …

    soton Download PDF for Influence of electrical discharges on white etching crack formation and their detection using electrostatic sensing technique (opens in a new tab)

  13. Understanding Crack Formation in IN738 Alloy Fabricated by Laser Powder Bed Fusion and Heat Treatment Process

    Cracking often occurs after Laser Powder Bed Fusion (LPBF) due to residual stresses from the manufacturing process. To mitigate these stresses, post-processing methods like stress relief Heat Treatment (HT) are used. This study combines computational and experimental methods to analyze and predict …

    concordia Download PDF for Understanding Crack Formation in IN738 Alloy Fabricated by Laser Powder Bed Fusion and Heat Treatment Process (opens in a new tab)

  14. It Starts with a Crack: Formation Mechanisms of Artesia Group Tepee Structures, southeast New Mexico and west Texas

    … the strata housing them, mechanisms for their formation are important to understand depositional conditions. Middle Permian Artesia Group tepees, located at the shelf-crest break of the Delaware Basin, provide excellent exposures and allow a test of formation mechanisms. To assess a mechanism, …

    ttu Repository record for It Starts with a Crack: Formation Mechanisms of Artesia Group Tepee Structures, southeast New Mexico and west Texas (opens in a new tab)

  15. Methodology for uncertainty-based inspection planning of concrete bridge decks using mechanistic models of crack formation and propagation

    … A mathematical program called Concrete Deck Cracking Probability Model (CDCPM) is written in MATLAB to model the uncertainty in the occurrence of transverse cracking and delamination in the deck. Through literature review, mechanistic models of the processes that affect cracking are …

    colostate Repository record for Methodology for uncertainty-based inspection planning of concrete bridge decks using mechanistic models of crack formation and propagation (opens in a new tab)

  16. Microstructure-sensitive fatigue modeling of heat treated and shot peened martensitic gear steels

    … carbides) microstructure attributes on fatigue crack formation and the early stage of microstructurally small crack (MSC) growth that dominate high cycle fatigue (HCF) lifetime. To model the fatigue response at various microstructure scales, a hierarchical approach is adopted. A simplified …

    gatech Repository record for Microstructure-sensitive fatigue modeling of heat treated and shot peened martensitic gear steels (opens in a new tab)

  17. Deformation and fracture behavior during annealing of residually stressed polycrystalline aluminum oxide

    … temperatures occurred by elastic creep through crack nucleation and growth in regions under tensile stresses. From the scanning electron fractographs, it was found that intergranular glassy phase played an important role in the crack formation and propagation. At elevated temperature, viscous …

    vt Repository record for Deformation and fracture behavior during annealing of residually stressed polycrystalline aluminum oxide (opens in a new tab)

  18. An Investigation on Residual Stress Build-Up in Cold Sprayed Metallic Samples: Effect of Stress Relaxation Heat Treatment

    Residual stress formation during cold spraying process may result in deteriorative effects on the performance of coating materials. The objective of this investigation is to characterize residual stress built-up in some of well-known metallic alloys deposited by cold spraying. Two different nickel …

    ndsu Repository record for An Investigation on Residual Stress Build-Up in Cold Sprayed Metallic Samples: Effect of Stress Relaxation Heat Treatment (opens in a new tab)

Page 1 of 14