Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Crack Growth Models"”.

  1. Mechanism-based modeling of ductile void growth failure in multilayer structures

    … Motivated by the moisture-induced a??popcorn crackinga?? failure phenomenon in the IC packages, this literature serves to gain a deeper understanding on the micro-mechanics of vapour pressure-assisted ductile fracture. IC packages assembly typically consists of intricate multilayer structures …

    nus Repository record for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab) Download file for Mechanism-based modeling of ductile void growth failure in multilayer structures (opens in a new tab)

  2. DIGITAL TWINS FOR FATIGUE CRACK MONITORING IN CIVIL INFRASTRUCTURE

    … digital twin solutions for fatigue crack condition monitoring over a variety of steel configurations. Digital twins are high-fidelity and virtual replicas of sensor-interfaced physical assets. They make use of real-time sensor data to reflect the state of their physical counterparts. …

    nus Repository record for DIGITAL TWINS FOR FATIGUE CRACK MONITORING IN CIVIL INFRASTRUCTURE (opens in a new tab) Download file for DIGITAL TWINS FOR FATIGUE CRACK MONITORING IN CIVIL INFRASTRUCTURE (opens in a new tab)

  3. Experimental and Numerical Study of Mode II Delamination in Laminated Composite Beams

    … as well as structural-scale numerical models which accurately predict delamination behavior. In this thesis the end loaded split (ELS) specimen was used to experimentally investigate mode II delamination, which is less well understood than mode I delamination. Force-displacement data …

    washington Repository record for Experimental and Numerical Study of Mode II Delamination in Laminated Composite Beams (opens in a new tab)

  4. Physically-based models for elevated temperature low cycle fatigue crack initiation and growth in Rene 88DT

    … of this work is to develop physically-based models that are able to accurately predict the high temperature crack initiation behavior of Rene 88DT, a commonly used aircraft engine disk material, under low cycle fatigue (LCF) conditions. Two different microstructural conditions were produced …

    gatech Repository record for Physically-based models for elevated temperature low cycle fatigue crack initiation and growth in Rene 88DT (opens in a new tab)

  5. Single overload fatigue crack growth retardation : an implementation of plasticity induced closure

    … history include overload plasticity zone, crack closure with a special trend with respect to crack length, spike-dip in fatigue crack growth rate and retardation in fatigue growth. This research focuses on life prediction of components subjected to variable magnitude single overloads, in a …

    uvic Repository record for Single overload fatigue crack growth retardation : an implementation of plasticity induced closure (opens in a new tab)

  6. Airframe Integrity Based on Bayesian Approach

    … structures is the development of fatigue cracks in the fastener holes. A probabilistic-based method has been proposed to manage this problem. In this research, the Bayes' theorem is used to assess airframe integrity by updating generic data with airframe inspection data while such data are …

    maryland Repository record for Airframe Integrity Based on Bayesian Approach (opens in a new tab)

  7. A HYBRID MODEL FOR FATIGUE LIFE ESTIMATION OF POLYMER MATRIX COMPOSITES

    … methods for metals which are based on physical crack growth models, the heart of fatigue life models for composites is empirical S-N data for each specific material system and specific loading conditions. This implies that the physical nature and processes responsible for tensile fatigue are not …

    maryland Repository record for A HYBRID MODEL FOR FATIGUE LIFE ESTIMATION OF POLYMER MATRIX COMPOSITES (opens in a new tab)

  8. Fatigue Test and Prognosis Study of Welded Tubular Joints in Signal Support Structures

    … However, they are susceptible to fatigue cracking which may lead to structural failure such as collapse, thus pose a threat to driver's safety. To address this issue, this study is focused on fatigue test, modeling and prognosis of the fatigue crack growth in full-scale welded tubular …

    maryland Repository record for Fatigue Test and Prognosis Study of Welded Tubular Joints in Signal Support Structures (opens in a new tab)

  9. Fatigue crack growth model for arbitrary planar cracks subjected to non-uniform stress field induced by variable amplitude loading

    … using linear elastic fracture mechanics. Fatigue crack growth models make use of the stress intensity factor (SIF) range and the maximum SIF to describe the driving force for crack propagation. Determining the stress intensity factor in many practical cases is difficult because the stress field is …

    aalto Repository record for Fatigue crack growth model for arbitrary planar cracks subjected to non-uniform stress field induced by variable amplitude loading (opens in a new tab)

  10. Fracture Mechanics Fatigue Life Assessment of Welded Joints Under Ultrasonic Impact Treatment

    … flexibility. Irregular geometries, micro cracks, defects, high stress concentration and tensile residual stresses are some of the results of a highly metallurgical process considered as welding. Thus, an important subject of growing concern in product design is to consider some of the …

    concordia Download PDF for Fracture Mechanics Fatigue Life Assessment of Welded Joints Under Ultrasonic Impact Treatment (opens in a new tab)

  11. Fatigue Crack Growth Analysis with Finite Element Methods and a Monte Carlo Simulation

    Fatigue crack growth in engineered structures reduces the structures load carrying capacity and will eventually lead to failure. Cycles required to grow a crack from an initial length to the critical length is called the fatigue fracture life. In this thesis, five different methods for analyzing …

    vt Repository record for Fatigue Crack Growth Analysis with Finite Element Methods and a Monte Carlo Simulation (opens in a new tab)

  12. Quantification of constraint in three-dimensional fracture mechanics

    Abstract The role of crack tip constraint in three dimensional fracture mechanics has been investigated under elastic-plastic conditions using finite element techniques. Out-of-plane constraint loss has been identified by comparing the mean stress of the three dimensional cracked body with a …

    glasgow Download PDF for Quantification of constraint in three-dimensional fracture mechanics (opens in a new tab)

  13. Mechanical and Chemical Properties of High Density Polyethylene: Effects of Microstructure on Creep Characteristics

    Environmental stress cracking (ESC) can result in catastrophic failure of polyethylene (PE) structures without any visible warning. The use of PE in more demanding applications, such as trenchless piping, can accelerate ESC failure of the material. Besides public safety issues, the replacement and …

    waterloo Repository record for Mechanical and Chemical Properties of High Density Polyethylene: Effects of Microstructure on Creep Characteristics (opens in a new tab)

  14. Impact of Uncertainties on Structures Damage Tolerance Parameters

    … is to investigate how varying parameters affect crack growth prediction and the effectiveness of inspection strategies. The methodology involves systematically analyzing inspection intervals, considering factors like material properties, probability of detection (POD), and other critical inputs. …

    embry-riddle Repository record for Impact of Uncertainties on Structures Damage Tolerance Parameters (opens in a new tab)

  15. Propagation of Fatigue Cracks under Shear Loading Modes II, III and II+III in the Near-Threshold Region

    Práce je zaměřena na šíření únavových trhlin v módech II, III a II + III v prahové oblasti v kovových materiálech. Byly provedeny experimenty pro ARMCO železo, titan, nikl a austenitickou ocel na třech druzích vzorků pro zatěžování trhliny ve smykových módech. Byl použit zvláštní způsob vytváření …

    brno-tech Repository record for Propagation of Fatigue Cracks under Shear Loading Modes II, III and II+III in the Near-Threshold Region (opens in a new tab)