Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"Crack control"”.
-
Automated crack control analysis for concrete pavement construction
The focus of this research is on the control of random cracking in concrete paving by using sawcut notch locations in the early stages of construction. This is a major concern in concrete pavement construction. This research also addresses a probabilistic approach to determine the optimum time and …
-
Crack control in reinforced concrete slabs using polymer grids
… an understanding of the short and long term cracking behaviour of concrete slabs reinforced with Tensar polymer grids.The objectives of the short term test program were to study the effectiveness of polymer grids in controlling the cracks in concrete slabs due to restrained shrinkage. The …
-
Time-dependent cracking and crack control in reinforced concrete structures
… the relatively low tensile strength of concrete, cracks are inevitable in reinforced concrete structures. Therefore, studying the cracking behaviour of reinforced concrete elements and controlling the width of cracks are necessary objectives both in research and in design. The introduction of …
-
Fibre Reinforcement for Shrinkage Crack Control in Prestressed, Precast Segmental Bridges
… reinforcement serves only as shrinkage crack controllers. The presence of this reinforcement, however, has restricted the ability to reduce the cross-section of the segments when high strength concrete is used because of the minimum dimensions required to accomodate the reinforcement. …
-
Crack Control and Bond Performance of Alternative Coated Reinforcements in Concrete
Concrete cracking in structures is a ubiquitous problem which can lead to the deterioration of the structure. Other than affecting the strength aspect of a structure, cracking impacts the serviceability criteria as well. Although cracking phenomenon in any structure is highly inevitable, it has to …
-
Investigation of spacing limits for crack control reinforcement within AASHTO LRFD strut-and-tie modeling design provisions
… of relaxing the maximum spacing requirement of crack control reinforcement reinforced concrete deep beams within AASHTO LRDS. The spacing of the crack control reinforcement in the current STM provisions in the AASHTO LRFD specifications limits the maximum spacing to the smaller of d/4 and 12.0 …
-
Experimental and Numerical Investigation of End Zone Crack Control Strategies During Detensioning of Pretensioned Concrete Bulb-Tee Girders
… However, PCBTs are susceptible to end zone cracks which develop in the web due to high vertical tensile stresses caused by prestress force transfer from the strands into the concrete at beam ends. This issue begins during strand detensioning and is exacerbated when the beams are lifted from …
-
The use of high-strength reinforcement in bridge decks
… that high-strength reinforcement had a similar crack-control performance as the conventional reinforcement at the same spacing. Increasing the spacing of reinforcement was found to have negative effects on crack-control performance. All specimens with high-strength reinforcement showed increased …
-
Comparison of Flexural Cracking in Reinforced Concrete Beams with Different Rebar Coatings
… coating can also affect the bond performance and crack size in steel reinforced concrete. This thesis presents the results of an experimental program wherein the flexural cracks of concrete beams reinforced with steel bars with different coatings are compared. Specimens with uncoated carbon …
-
Three-Dimensional Finite Element Analysis to Evaluate Reflective Cracking Potential in Asphalt Concrete Overlays
The study revealed that the crack treatment interlayer, ISAC, greatly reduces the tensile stresses at the bottom of the overlay after both the cooling cycle and cooling cycle plus traffic loading. On the other hand, the modified asphalt (PG 64-28) greatly reduces the tensile stresses at the top of …
-
Experimental investigation of the beneficial effect of confinement on the nodal regions in the strut-and-tie method
… and at CCT extended nodal zone in addition to crack control reinforcement. (2)With additional CCC and CCT nodal confinement, vertical reinforcement had a significant remaining capacity. Cross section confinement was concluded to be unnecessary. Horizontal reinforcement is not critical with a …
-
External strengthening of reinforced concrete pier caps
… tied arch action after the formation of diagonal cracks. Externally bonded fiber reinforced polymer (FRP) reinforcement has been shown to increase the shear capacity of reinforced concrete members which carry load through beam action. However, there is an insufficient amount of research to make it …
-
Seismic shear response of rc members with varying ductility
… a scheme to obtain a comprehensive record of crack patterns and deformations. Enhancements made to both the experimental documentation and the specimen boundary conditions are described. A number of parameters are investigated to examine their effect on a reinforced concrete member's behaviour …
-
Behaviour of concrete corbels reinforced with GFRP bent bars
… two were reinforced with steel reinforcement as control specimens. Four out of the twelve GFRP-RC corbels were cast using high-strength concrete (HSC), while the remaining eight were constructed using normal-strength concrete (NSC). The corbel was tapered with cross-sectional dimensions of 450 mm …
-
Numerical modelling of time-dependent cracking and deformation of reinforced concrete structures
For a structure to remain serviceable, crack widths must be small enough to be acceptable from an aesthetic point of view, small enough to avoid waterproofing problems and small enough to prevent the ingress of water that may lead to corrosion of the reinforcement. Crack control is therefore an …
-
Investigation of bond of deformed bars in plain and steel-fiber-reinforced concrete under reversed cyclic loading
… steel fibers make a definite contribution to crack control and better serviceability.
-
Evaluation of performance and maximum length of continuous decks in simple-span bridges
… of two edge beams with a construction joint for crack control. The current technical literature and current practices and design procedures were synthesized and summarized. GDOT maintenance reports were reviewed, and field evaluations were conducted to determine the performance of the continuous …
Page 1 of 3